Hood CFB 9463 X User Manual CFB 6463 X EN ES PT ENGLISH 1 Recommendations and Suggestions 4 2 General Information - Safety Warnings 7 3 Installation 9 4 Use - Maintenance 10 ESPAÑOL 1 Recomendaciones y sugerencias 13 2 Información general - Advertencias de seguridad 16 3 Instalación 18 4 Uso - Mantenimiento 19 PORTUGUÊS 1 Conselhos e Sugestões 22 2 İnformações gerais - Precauções de segurança 25 3 Instalação 27 4 Utilização - Manutenção 28 01M-8846143200-0615-01 01M-8846153200-0615-01 2 / 28 EN Hood / User Manual Please read this user manual first! Dear Customer, Thank you for prefering a Beko product We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use If you handover the product to someone else, give the user manual as well Follow all warnings and information in the user manual Remember that this user manual is also applicable for several other models Differences between models will be identified in the manual Explanation of symbols Throughout this user manual the following symbols are used: C Important information or useful hints about usage A Warning for hazardous situations with regard to life and property B Warning for electric shock Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations Do not dispose of the packaging materials together with the domestic or other wastes Take them to the packaging material collection points designated by the local authorities This product was manufactured using the latest technology in environmentally friendly conditions 1 Recommendations and Suggestions • Do not connect the extractor The Instructions for Use hood to exhaust ducts carrying apply to several ver- combustion fumes (boilers, A sions of this appliance fireplaces, etc ) Accordingly, you may find descriptions of individual • If the extractor is used in conjunction with non-electrical features that do not apply appliances (e g gas burning to your specific appliance appliances), a sufficient degree 1.1 Installation of aeration must be guaranteed in the room in order to prevent The manufacturer will not be held the backflow of exhaust gas The liable for any damages resulting kitchen must have an opening from incorrect or improper communicating directly with the installation open air in order to guarantee the • The minimum safety distance entry of clean air When the cooker between the cooker top and hood is used in conjunction with the extractor hood is 650 mm appliances supplied with energy (some models can be installed other than electric, the negative at a lower height, please refer pressure in the room must not to the paragraphs on working exceed 0,04 mbar to prevent dimensions and installation) fumes being drawn back into the • Check that the mains voltage room by the cooker hood corresponds to that indicated on • In the event of damage to the the rating plate fixed to the inside power cable, it must be replaced of the hood by the manufacturer or by the • For Class I appliances, check technical service department, in that the domestic power supply order to prevent any risks guarantees adequate earthing • If the instructions for installation • Connect the extractor to the for the gas hob specify a greater exhaust flue through a pipe of distance specified above, this minimum diameter 120 mm The has to be taken into account route of the flue must be as short Regulations concerning the as possible discharge of air have to be fulfilled 4 / 28 EN Hood / User Manual 1 Recommendations and Suggestions • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety • Children should be supervised to 1.2 Use ensure that they do not play with • The extractor hood has been the appliance designed exclusively for domestic • “CAUTION: Accessible parts may use to eliminate kitchen smells become hot when used with • Never use the hood for purposes cooking appliances ” other than for which it has been designed • Never leave high naked flames under the hood when it is in operation • Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides • Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames • Do not flambè under the range hood; risk of fire Hood / User Manual 5 / 28 EN 1 Recommendations and Suggestions 1.3 Maintenance The symbol onthe productoron itspack- aging indicatesthat this productmay not • Switch off or unplug the appliance betreatedas household waste Insteadit from the mains supply before shalbe handed over totheapplica- blecolectionpointfortherecyclingof electrical an- carrying out any maintenance delectronic equipment By ensuring this product work isdisposedof correctly, you wilhelp prevent poten- tial negative consequences for theenvironmen- • Clean and/or replace the Filters tandhumanhealth, whichcould otherwisebe after the specified time period caused by inappropriate waste handling of this (Fire hazard) product For more detailed information about re- cycling of this product, please contact your local • Clean the hood using a damp cloth city office, yourhousehold waste disposal servi- and a neutral liquid detergent ceor the shop where you purchased the product 6 / 28 EN Hood / User Manual 2 General Information - Safety Warnings General Informatıon 1. Safety Warnings This canopy hood is designed to be 1 1 When used in the extraction fixed to any rigid vertical surface, mode, the cooker hood ducting over a gas or electric hotplate and must not be connected to a flue can be used either in the extraction which is used for exhausting mode (ducted to the outside) fumes from appliances supplied or in the recirculation mode with energy other than electric, (internal recycling) All cookers such as a central heating flue or hood perform better when used water heating flue in extraction mode During winter 1 2 Before connecting to the mains time it may be convenient to use supply ensure that the mains the hood in the recycling mode to voltage corresponds with the avoid heat loss from the kitchen voltage on the rating plate Before starting the installation, inside the hood consideration should be given to 1 3 Connect the cooker hood to the the difficulties that can be found mains via a double poled switch during installation The installation which has 3mm clearance work must be undertaken by a between the contacts qualified and competent person in 1 4 For cooker hoods featuring conformity to the rules concerning an earth cable, make sure the the evacuation of contaminated air electric plant of your house is The manufacturer disclaims all correctly earthed liability for any damage or injury 1 5 Appliance in class II are provided caused as a result of not following with a double insulation; the instructions for installation therefore do not connect them contained in the following text through earthed plugs but through a double poled plugs 1 6 When installed, the hood must be positioned at least 65cm above the hotplate Hood / User Manual 7 / 28 EN 2 General Information - Safety Warnings 1 7 Never do flambé cooking under 1 12 If the supply cord is damaged, this cooker hood it must be replaced by a special 1 8 Never leave frying pans cord or assembly available from unattended during use as the manufacturer or its service overheated fat and oil may agent catch fire 1 13 This appliance is not intended 1 9 Before carrying out any kind for use by persons (including of maintenance or cleaning, children) with reduced physical, disconnect the hood from the sensory or mental capabilities, mains supply or lack of experience and knowledge, unless they have 1 10 If the room where the cooker been given supervision or hood is to be used contains a instruction concerning use fuel burning appliance such of the appliance by a person as a central heating boiler responsible for their safety then this must be of the room sealed or balanced flue type If 1 14 Children should be supervised other types of flue or appliance to ensure that they do not play are fitted, ensure that there is with the appliance an adequate supply of air into the room When the cooker hood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the cooker hood 1 11 The appliance must be positioned so that the plug is accessible 8 / 28 EN Hood / User Manual 3 Installation 3. 1 Installatıon Instructıons 3.1.4 Choice of operating mode Some installation systems require the opening • Evacuation mode and removal of the metal grille panel To check that the hood is set up for evacuation, open the grille panel and make sure that the 3.1.1 Instructions for opening conversion lever or the change-over knob on and removing the metal grille the centrifugal unit is in the DUCTING position panel The charcoal filter is not required For ducting to To open the grille panel, press inwardly on the two the outside, the hood is supplied with a rear and slider catches at each side of the grille panel and top outlet A flange spigot of 100 mm diameter the grille will pivot down (120 mm in certain models) is usually fitted on the top outlet and a blanking plug on the rear To remove the metal grille, pull forward on the outlet If you choose to duct the hood from the right hand side so that the hinge pin on the back rear of the casing, you should invert the posi- of the grille will be released from the slot in the tion of the flange and of the blanking plug Pay side of the casing attention to the safety regulation 1 1 3.1.2 Wall cabinet fixing • Internal recirculation mode • Predrilled wall cabinet: fix the hood onto the To check that the hood is set up for recycling, wall cabinet base panel using the four screws open the grille panel and make sure that the 4 2 x 45 mm (supplied with the fixing kit) It is conversion lever or the change-over knob on not necessary to open the metal grille the centrifugal unit is in the RECYCLING posi- • No predrilled wall cabinet: tion The charcoal filter is to be fitted To fit the charcoal filter, support the filter with one hand - If the hood is provided with a paper fixing and turn the thumb screw through the centre of template, follow the instructions the charcoal filter If the filter is of the interlock- - If the hood is not provided with a paper fixing ing type, turn the filter clockwise The hood can template, position the hood on the wall remain connected to the outside cabinet base panel and pilot drill the 3 5 x 16 mm screws (not supplied with the fixing kit) 3.1.5 Electrical connection and from the inside onto the wood working test 3.1.3 Wall mounting • The safety measures 1 2, 1 3, 1 4 and 1 5 of para- • Drill two Ø 8 mm holes on the wall using the graph 1 are to be strictly observed paper template, insert two rawl plugs and two • Once the electrical connection has been com- 4 2 x 44,4 mm screws leaving 5 mm untight- pleted, check that the worktop illumination, ened Open the metal grille panel, hook the motor and speeds work properly hood on and fully tighten the screws • If the hood is not provided with a paper fixing template, drill two Ø 8 mm holes (see draw ), insert the plugs and screws, proceeding as di- rected under paragraph a • For wall mounting using wallbrackets (optional), follow the instructions of the fixing template • Pay attention to the safety regulation of point 1 6 Hood / User Manual 9 / 28 EN 4 Use - Maintenance 4.1 Operation c Multi-layer metal filter It should be washed once a month in hot water using mild detergent • Controls are located on the right hand side of or liquid soap It can be washed in a dishwasher the front to operate worktop illumination and It should not be bent and should be left to drain select the most suitable working speed for your dry cooking To increase the area of extraction, WARNING: An excess of grease in the filter not the glass visor should be pulled open The top only would affect the performance of the hood, speed should be used when frying or cooking but it is also a possible fire risk We strongly foods with strong odours, while a lower speed recommend therefore to clean and replace filters can be used for normal cooking To obtain the in accordance with the manufacturer instructions best performance from your hood, turn it on before you start cooking and leave it running 4.2.2 Cleaning Metal self- for a few minutes after your cooking is over to supporting Grease Filters clear the air • The filters are washable and must be cleaned at • Pay attention to safety regulations 1 7 and 1 8 least every 2 months of operation, or more fre- quently for particularly heavy usage 4.2 Maintenance and • Remove the filters one at a time by pushing Cleaning them towards the back of the group and pulling Regular maintenance and cleaning will ensure down at the same time good performance and reliability, while extending • Wash the filters, taking care not to bend them the working-life of the hood Special attention Allow them to dry before refitting should be reserved to the grease filter and to the • When refitting the filters, make sure that the charcoal filter (recycling mode) handle is visible on the outside 4.2.1 Grease filter 4.2.3 Charcoal filter This retains the solid grease particles and can be supplied in different types lt is fitted onto the The charcoal filter is a chemical filter to be used reverse side of the metal grille panel Maintenance only when the hood is in the recycling position of the grease filter varies according to the used To replace the charcoal filter, open the grille and type remove the thumb screw through the centre of a Whatever type of filters used, the filter is easily the charcoal filter If the filter is of the interlocking removed from the grille by pushing the metal type, turn the filter anticlockwise Replace by wire clips to one side and removing reversing the operation For a good performance b Thin synthetic filter (1 mm thick) It should replace the charcoal filter on average every three not be washed and should be replaced every months two months If the filter is provided with a 4.2.4 Worktop illumination saturation indicator, replace when: b 1- The violet colour of the dots, which are If a lamp fails to function at any time, open the visible through the metal grille, is spread metal grille panel and check that the lamp is fully over the whole surface of the filter screwed into the holder When changing the lamp, b 2- The red colour of the stripes, which is not an identical replacement must be fitted to ensure visible through the metal grille when the a safe working of the hood filter is clean, becomes visible from the outside of the metal grille 10 / 28 EN Hood / User Manual