User Manual Internet / Wi-Fi, DAB, FM Radio System WARNING • TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT. • EXCESSIVE SOUND PRESSURE FROM EARPHONES AND HEADPHONES CAN CAUSE HEARING LOSS. • USE OF CONTROLS OR ADjUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE • CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EqUIPMENT. This lightning flash with an arrow head FCC RF Radiation Exposure statement: symbol, within an equilateral triangle, is This equipment complies with FCC RF radiation exposure limits set forth for an intended to alert the user to the presence uncontrolled environment. This equipment should be installed and operated with a of un-insulated “dangerous voltage” within minimum distance of 20 centimetres between the radiator and your body. the product’s enclosure that may be of sufficient magnitude to constitute a risk of NOTE: electric shock to the persons. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Warning: To reduce the risk of electric This equipment generates, uses and can radiate radio frequency energy and, if not shock, do not remove cover (or back), installed and used in accordance with the instructions, may cause harmful interference no user-serviceable parts inside. Refer to radio communications. However, there is no guarantee that interference will not servicing to qualified service personnel. occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more This exclamation point within an equilateral of the following measures: re-orient or relocate the receiving antenna. Increase the triangle is intended to alert the user to separation between the equipment and receiver. Connect the equipment into an presence of important maintenance outlet on a circuit different from that to which the receiver is needed. Consult the (servicing) instructions in the literature dealer or an experienced radio/TV technician for help. accompanying the appliance. monitoraudio.co.uk i Important Safety InStructIonS 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen onto the apparatus, 1. Read these instructions. the apparatus has been exposed to rain or moisture, does not operate normally 2. Keep these instructions. or has been dropped. 3. Heed all warnings. 15. The appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 4. Follow all instructions. 16. Switch off the unit when you don’t use it. Switch off the unit and disconnect 5. Do not use this apparatus with water. it from the AC power supply when it is not being used for a long time. The mains 6. Clean only with a dry cloth. Great care and attention has gone into the plug is used as the disconnect device, the disconnect device shall remain readily materials chosen to produce the product. A gentle wipe with a dry, clean cloth operable at any time. is all that is required to remove any dust. Treat it as you would a fine piece of 17. This apparatus shall not be exposed to dripping or splashing water and furniture because that is how it has been designed. that no object filled with liquids such as vases shall be placed on the apparatus. 7. Do not block any ventilation openings. Install in accordance with Monitor Francais: L’appareil ne doit pas être exposé aux écoulements ou aux Audio’s instructions. éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit 8. Do not install near any heat sources, such as radiators, heat registers, stoves, être placé sur l’objet. or other apparatus (including amplifiers) that produce heat. 18. The marking information is located at the bottom enclosure of the 9. Do not defeat the purpose of the polarised or grounding type plug. A apparatus. polarised plug has two blades with one wider than the other. A grounding type Francais: Le marquage de l’appareil figure sur la partie inférieure du boîtier. plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit your outlet, 19. AC/DC adaptor is used as a disconnect device and it should remain readily consult an electrician for replacement of the obsolete outlet. operable during intended use. In order to disconnect the apparatus from mains completely, the AC/DC adaptor should be disconnected from the mains socket 10. Protect the power cord from being walked on or pinched particularly outlet completely. at plugs, convenience receptacles, and the point where they exit from the apparatus. Francais: L’adaptateur AC/DC de l’appareil ne doit pas être obstrué ou doit être facilement accessible pendant son utilisation. Pour être complètement 11. Only use attachments/ accessories specified by Monitor Audio. déconnecté de l’alimentation d’entrée, l’adaptateur AC/DC de l’appareil doit être 12. Use only with the cart, stand, tripod, bracket, or table specified by the déconnecté du secteur. manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightening storms, or when unused for long periods of time. ii AirStream 10 contentS page IMPoRTAnT SAFeTy WARnInGS i MuSIC PLAyeR 11 AuxILIARy InPuT 21 IMPoRTAnT SAFeTy InSTRuCTIonS ii using the Music Player 11 Auxiliary Mode Display 21 ConTenTS 1 Music File Types 11 ADDITIonAL SyMBoLS DISPLAyeD 21 WeLCoMe 2 Selecting Music Player Mode 11 MAIn Menu 22 AirStream Helpline 2 Setting up the Music Player 11 SLeeP 22 What is in the Box? 2 Setting up for Shared Media 12 ALARMS 22 BuTTonS AnD ConneCTIonS 3 Setting up for Shared Folders 14 To set an Alarm 22 Definitions 4 Music Player Display 14 SySTeM SeTTInGS Menu 22 PRoDuCT SeT uP 5 DAB RADIo 15 TIMe AnD DATe SeTTInGS 22 Where to Position your AirStream 10 5 What is DAB Digital Radio? 15 To Manually Set the Time and Date 22 Switching on and Selecting DAB Mode 15 Auto update 23 Connecting to your network 5 Changing DAB Stations 15 Set Format 23 Advanced users 6 Manually Scanning for DAB Stations 15 Set the Time zone 23 Software update 6 Storing a DAB Station Preset 16 Daylight Savings 23 uSInG THe AirStream 10 7 Select a DAB Station Preset 16 LAnGuAGe 23 Switching on 7 DAB Display Information 16 LCD STAnDBy - BACkLIGHT 23 Switching off 7 Manual Tune 17 FACToRy ReSeT 23 Adjusting the Volume 7 Dynamic Range Control 17 SoFTWARe uPDATe 24 using Headphones 7 Station order 18 Automatic update 24 Selecting a Listening Mode 7 DAB Mode Display 18 Manually Check for updates 24 InTeRneT RADIo 8 FM RADIo 19 InFo 25 Introduction to Internet Radio 8 FM Radio Mode 19 HeLP 26 using the Internet Radio 8 Selecting FM Radio Mode 19 unable to Connect to Wireless network 26 Storing an Internet Station Preset 9 Tuning to a FM Station 19 DAB Radio Reception is Poor 27 Select an Internet Station Preset 9 Changing the Scan Setting 19 no Sound 27 Podcasts 9 Changing the Audio Setting 20 The AirStream 10 does not Respond 27 Last Listened 9 Storing a FM Station Preset 20 CARe AnD MAInTenAnCe 28 My Favourites and My Added Stations 10 Select a FM Station Preset 20 PRoDuCT GuARAnTee 28 Help 10 FM Display Information 20 GLoSSARy oF TeRMS 29 Internet Radio Display 10 FM Mode Display 20 monitoraudio.co.uk 1 WeLcome airStream Helpline Introducing the AirStream 10 Multi-Format radio from Monitor Audio®. your AirStream 10 The helpdesk is open from 8.30am to 5.00pm, Monday to Friday (excluding Bank is a combined DAB (not uSA model), FM and Internet radio with media streaming. It Holidays) and can be contacted on: utilises the very latest technology with a quick and easy set up and a clear information +44 (0)1268 740580 (local call rate). or at www.monitoraudio.co.uk display. What’s in the Box? Monitor Audio have used their vast experience and knowledge of the hi-fi industry and transferred it into a complete radio solution. 1 x Airstream 10 1 x Mains adaptor Please read through all of the Safety Instructions (separate booklet), Initial Set up 1 x ethernet cable Guide and this user Guide before proceeding to operate your AirStream 10. 1 x 3.5 mm jack lead user Manual/Guides Before you can receive internet radio stations you will need to check that you have the following: • A broadband internet connection • Avi aw air eroleustse r.access point (Wi-Fi) connected to your broadband internet, Internet / Wi-Fi, DAB, FM Radio System User Manual Internet / Wi-Fi, DAB, FM Radio System Safety Instructions If your wireless network is configured to use Wired equivalent Privacy (WeP) or Wi-Fi Protected Access (WPA) data encryption then you will need to know the WeP or WPA code so that your AirStream 10 can communicate with your network. • Your AirStream 10 should work in all locations where the Wi-Fi network is available. you will also need to know the name of your wireless network, i.e. its SSID. uK uS Before you continue please make sure that your wireless access point is turned on and connected to your broadband internet. you may need to read the instructions provided with your wireless access point and router. Note: 1. If you have a wireless laptop computer available you can use this to check that the wireless network is working ok before you begin to set up your AirStream 10. 2. If you do not have a wireless connection you can use the ethernet cable supplied aus euro to connect to your computer/ router/ ethernet network point. Note: Some models will only contain 1 plug adaptor 2 AirStream 10 ButtonS & connectIonS Preset Buttons Display Auxiliary Input Right Stereo Audio Button output Play/ Pause Stereo Headphone Speaker Button output Left Button ethernet Input Tune/ Select Dial Alarm Menu Power Input Mode Return Aerial Button Sleep/ Snooze eQ Anti-slip rubber Info pad locations Stand By Button monitoraudio.co.uk 3 ButtonS & connectIonS. cont. • Return Button - This button is used frequently in the menu system, to access the previous display. However, when in Internet Radio mode, it brings up the Definitions Internet radio menu. In Music Player mode, it brings up the music list for that folder. In DAB mode, it brings up the station list. In FM mode and Auxiliary • Stand By - Turns the AirStream 10 on and off out of stand by mode. When in mode, it has no function. Stand by, you can set the display to be fully illuminated, partially or not at all. • Tune/ Select Dial - It is used to scroll through the menus, and select the • Aerial - This must be fully extended in order to ensure maximum FM and DAB highlighted option by pressing down on it. signal strength. Some adjustment may be required, but fully extended vertically • Auxiliary Input - An input to allow inter-connection of other devices, such as is the recommended place to start. The aerial is not required when in Internet MP3 players and CD players. It is recommended that the volume of the auxiliary Radio or Music Player modes. device is set to approximately three quarter volume for optimum playback quality. • Mode - Scrolls through the various playback modes. • Audio Output - This connection is used to connect the AirStream 10 to other • Menu - Press this to enter into the main menu (not playing any particular mode) audio devices. This is set to a fixed level and the volume is controlled via the or the main menu for the mode in which you are in. external device. The speaker on the AirStream 10 will still remain active. A stereo • Alarm - Short cut to the alarms setting menu. signal will be played providing one is received. • Sleep/ Snooze - The sleep function automatically turn the AirStream 10 off after • Headphone Output - use to connect headphones (not supplied with the a user set period of time. The Snooze function silences an activated alarm for a AirStream 10). The volume is controlled via the AirStream 10 however, the speaker period of 5 minutes. you will be able to see it count down on the AirStream 10 of the AirStream 10 will be muted. A stereo signal will be played providing one display. is received. • Eq - Scroll through the various preset eQ settings (optimum, Voice, Classical, • Ethernet Input - Allows for a wired connection to a router (or ethernet switch) Pop, Rock or Dynamic). where a wireless connection is not available. • Info - Press this button to scroll through various information transmitted during • Power Input - Connect only the power supply unit supplied with the AirStream 10. FM (only when an RDS signal is being received), DAB (not all models), Internet Do not use any other devices. Radio and Music Player. • Anti-slip Rubber pad locations - Place the self adhesive rubber pads here • Play/ Pause Button - This acts as a mute button when in Internet, DAB and when using the AirStream 10 in a horizontal orientation. eight pieces have been FM modes. When in Music Player mode, you can play and pause the music supplied. only four are required, leaving four spares. Additional information can you are listening to. be found on the help sheet contained with the pads. • Left Button - This is used to skip backward to a previous track(s) when in Music Player mode. In DAB mode, it brings up the station list. In FM mode, it is used as a form of manual tuning in -0.05MHz steps. It is disabled in Internet Radio or Auxiliary modes. • Right Button - This is used to skip forward to the next track(s) when in Music Player mode. In DAB mode, it brings up the station list. In FM mode, it is used as a form of manual tuning in +0.05MHz steps. It is disabled in Internet Radio or Auxiliary modes. 4 AirStream 10 proDuct Set up 3. Press the ‘Stand By’ button (see the image on page 3). The main menu will be displayed (if it is not displayed, press the menu button): Where to position your airStream10 It is important that you consider carefully in advance where your AirStream 10 will be Main Menu 1 3 situated and make sure that it is: Internet AirStream 10 Music player • on a flat and stable surface. DAB FM • Within 1.8 metres of a power socket. 2 Aux in 4 • Within a strong wireless network reception area. • If you are not using the wireless connection, you must be near, or have access 4. Turn the ‘Tune/ Select Dial’ to highlight and select ‘System Settings’. This will to a ethernet point. display the ‘System Settings’ menu: • Where the telescopic aerial can be fully extended when listening to DAB or FM stations. System settings 1 3 • Away from bright sunlight or heat sources, such as a radiator. network > Time/ Date > • Away from humid or very damp places such as a bathroom. Language > LCD Standby-Backlight > 2 4 Factory reset Switching on and connecting to your network. (Also see the Quick Start Guide.) 5. Press the ‘Tune/Select Dial’ to select ‘network’ which in turn bringing up the 1. Connect the mains power lead into the socket on the bottom right hand side ‘network settings’ menu. Press the ‘Tune/Select Dial’ again to select and start of the AirStream10 (see the image on page 3) and plug the power adaptor into the ‘Internet Wizard’. The wizard will automatically scan for available Wi-Fi and the mains power wall socket and switch on. If using an ethernet network lead Wired networks displaying a list of those that are available. (supplied), also connect it at this stage. 6. Turn the ‘Tune/Select Dial’ to your chosen network and press it to select. If using 2. ‘DeSIGn FoR SounD, STARTInG ...’ will be displayed followed by an un-set the wired connection method, select ‘[WIReD]’ from the list (please go to step time and date. 8). If the network does not have any security, ‘Please wait connecting’, and then ‘Connected’ will be displayed. 1 3 1 3 network settings network settings 1 3 1 3 DeSIGn FoR 00:00 SounD 00/00/0000 Please wait. R Connecting... Connected 2 STARTInG 4 2 4 2 4 2 4 7. If your network does have security, the wizard will prompt you to enter the relevant Wired equivalent Privacy (WeP) or Wi-Fi Protected Access (WPA) code or pass phrase. This is accomplished by turning the ‘Tune/ Select Dial’ to highlight the appropriate character, then pressing it to select. When the key has been entered, turn the dial to highlight ‘ok’ and press it to select. monitoraudio.co.uk 5 After successful entry of these details, the display will change to ‘Please wait Note: connecting.’, and then ‘Connected’ will be displayed. For privacy reasons, you should only connect to wireless access points that you own or have agreement to use. 1 network settings 3 1 network settings 3 Note: Please wait. R The security details must be the same as those saved in the wireless access point, Connecting... Connected which would have been set up by the person who installed your wireless network. The 2 4 2 4 WeP/ WPA code and SSID can be written into the box below for future reference. Note: If your network name or SSID has been hidden, the AirStream 10 will not be able to detect it. you can either turn on the SSID of your access point and then select ’[Rescan]’ or manually enter the SSID into the AirStream 10. To enter your SSID into Note: the AirStream 10, select ‘[Manual config]’ as below, then ‘DHCP enable’, ‘Wireless’ Make sure that the letter, number or symbol you wish to select is flashing in the display and then enter your SSID, (see page 4 for key entry). After you have entered your before you press the ‘Tune/ Select’ knob to select it. SSID, either select ’open’ if you have no further security on your network or proceed to enter your WeP or WPA codes. The AirStream 10 will now connect to the network Note: as in Step 4 (refer to page 5). WeP and WPA codes are sensitive to upper and lower case characters so must be entered exactly as they have been stored in the wireless access point. Note: advanced users In addition to the list of available networks there are three advanced options: • Rescan - To scan again for available networks It is possible to edit all of the settings for your internet connection. To access this • Wired - Which selects a ’wired‘ network menu: • Manual config - Which enables manual set up of a wireless configuration 1. Press ‘Menu’ and use the ‘Tune/Select Dial’ to scroll to and select ‘Main Menu’. including SSID and WeP/WPA codes. 2. use the ‘Tune/Select Dial’ again to scroll to and select ‘System setup’, followed 8. If using the wired connection method, then simply select it from the network by ‘Internet setup’ and then ‘Manual settings’. Wizard menu. It will then run through the connection process and the following 3. Within this same menu list you can select ‘View settings’, which enables you to will be displayed. If it doesn’t connect first time, go to the ‘Manual settings’ in the ‘network settings’ menu and select the ‘Wired’ option, then ‘DHCP enable’ see the current settings for: • MAC address DHCP • PC settings SSID network settings network settings 1 3 1 3 • IP settings, which displays the IP address, subnet mask and gateway address. Please wait. R Connecting... Connected Software update 2 4 2 4 It is recommended that you perform a software update before proceeding any further. Please go to page 24 for information on how to do this. 6 AirStream 10