ETSI TS 126 171 V6.0.0 (2004-12) Technical Specification Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); AMR speech codec, wideband; General description (3GPP TS 26.171 version 6.0.0 Release 6) R GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS 3GPP TS 26.171 version 6.0.0 Release 6 1 ETSI TS 126 171 V6.0.0 (2004-12) Reference RTS/TSGS-0426171v600 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 26.171 version 6.0.0 Release 6 2 ETSI TS 126 171 V6.0.0 (2004-12) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp . ETSI 3GPP TS 26.171 version 6.0.0 Release 6 3 ETSI TS 126 171 V6.0.0 (2004-12) Contents Intellectual Property Rights................................................................................................................................2 Foreword.............................................................................................................................................................2 Foreword.............................................................................................................................................................4 1 Scope........................................................................................................................................................5 2 Normative references...............................................................................................................................5 3 Definitions and abbreviations...................................................................................................................5 3.1 Abbreviations.....................................................................................................................................................5 4 General.....................................................................................................................................................6 5 Adaptive Multi-Rate Wideband speech codec transcoding functions......................................................8 6 Adaptive Multi-Rate Wideband speech codec ANSI C-code..................................................................8 7 Adaptive Multi-Rate Wideband speech codec test vectors......................................................................8 8 Adaptive Multi-Rate Wideband speech codec source controlled rate operation......................................9 9 Adaptive Multi-Rate Wideband speech codec voice activity detection...................................................9 10 Adaptive Multi-Rate Wideband speech codec comfort noise insertion.................................................10 11 Adaptive Multi-Rate Wideband speech codec error concealment of lost frames..................................10 12 Adaptive Multi-Rate Wideband speech codec frame structure..............................................................10 13 Adaptive Multi-Rate Wideband speech codec interface to RAN...........................................................11 14 Adaptive Multi-Rate Wideband speech codec performance characterisation........................................11 Annex A (informative): Change history...............................................................................................12 History..............................................................................................................................................................13 ETSI 3GPP TS 26.171 version 6.0.0 Release 6 4 ETSI TS 126 171 V6.0.0 (2004-12) Foreword This Technical Specification has been produced by the 3GPP. The present document is an introduction to the speech processing parts of the wideband telephony speech service employing the Adaptive Multi-Rate Wideband (AMR-WB) speech coder within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI 3GPP TS 26.171 version 6.0.0 Release 6 5 ETSI TS 126 171 V6.0.0 (2004-12) 1 Scope The present document is an introduction to the speech processing parts of the wideband telephony speech service employing the Adaptive Multi-Rate Wideband (AMR-WB) speech coder. A general overview of the speech processing functions is given, with reference to the documents where each function is specified in detail. 2 Normative references This TS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this TS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. [1] GSM 03.50 : "Digital cellular telecommunications system (Phase 2); Transmission planning aspects of the speech service in the GSM Public Land Mobile Network (PLMN) system". [2] 3GPP TS 26.190 : 'AMR Wideband Speech Codec; Transcoding functions". [3] 3GPP TS 26.173 : 'AMR Wideband Speech Codec; ANSI-C code". [4] 3GPP TS 26.174 : 'AMR Wideband Speech Codec; Test sequences". [5] 3GPP TS 26.193 : 'AMR Wideband Speech Codec; Source Controlled Rate operation". [6] 3GPP TS 26.194 : 'AMR Wideband Speech Codec; Voice Activity Detection (VAD)". [7] 3GPP TS 26.192 : 'AMR Wideband Speech Codec; Comfort Noise Aspects". [8] 3GPP TS 26.191 : 'AMR Wideband Speech Codec; Error Concealment of Lost Frames. [9] 3GPP TS 26.201 : 'AMR Wideband Speech Codec; Frame Structure". [10] 3GPP TS 26.202 : 'AMR Wideband Speech Codec; Interface to RAN". [11] 3GPP TS 26.901 : 'AMR Wideband Speech Codec; Performance characterisation". 3 Definitions and abbreviations 3.1 Abbreviations For the purposes of this TS, the following abbreviations apply: ACELP Algebraic Code Excited Linear Prediction AMR Adaptive Multi-Rate AMR-WB Adaptive Multi-Rate Wideband BFI Bad Frame Indication CHD Channel Decoder CHE Channel Encoder GSM Global System for Mobile communications ITU-T International Telecommunication Union – Telecommunication standardisation sector (former CCITT) PCM Pulse Code Modulation PLMN Public Land Mobile Network PSTN Public Switched Telephone Network ETSI 3GPP TS 26.171 version 6.0.0 Release 6 6 ETSI TS 126 171 V6.0.0 (2004-12) RX Receive SCR Source Controlled Rate SPD SPeech Decoder SPE SPeech Encoder TC Transcoder TX Transmit UE User Equipment (terminal) 4 General The AMR-WB speech coder consists of the multi-rate speech coder, a source controlled rate scheme including a voice activity detector and a comfort noise generation system, and an error concealment mechanism to combat the effects of transmission errors and lost packets. The multi-rate speech coder is a single integrated speech codec with nine source rates from 6.60 kbit/s to 23.85 kbit/s, and a low rate background noise encoding mode. The speech coder is capable of switching its bit-rate every 20 ms speech frame upon command. A reference configuration where the various speech processing functions are identified is given in Figure 1. In this figure, the relevant specifications for each function are also indicated. In Figure 1, the audio parts including analogue to digital and digital to analogue conversion are included, to show the complete speech path between the audio input/output in the User Equipment (UE) and the digital interface of the network. The detailed specification of the audio parts is not within the scope of this document. These aspects are only considered to the extent that the performance of the audio parts affect the performance of the speech transcoder. ETSI 3GPP TS 26.171 version 6.0.0 Release 6 7 ETSI TS 126 171 V6.0.0 (2004-12) TS 26.194 TS 26.193 BSS side only (wideband speech) Voice 14-bit 2 Activity 3 uniform Detector VAD SP BSS side only TS 26.190 flag TS 26.190 (narrowband speech) 6 6 1 8bit /t oA-law samUppling 2 ESnpceoedcehr CDonTtXrol 14-bit 1:2 4 and uniform Operation 7 Speech frame Info. TS 26.192 LPF A/D bits Comfort Noise 5 MS side only GSM 03.50 TX Functions SID frame TRANSMIT SIDE TS 26.193 TS 26.191 BSS side only (wideband speech) Info. bits Speech 14-bit 2 frame uniform substitution 8 BSS side only (narrowband speech) BFI TS 26.190 TS 26.190 9 14-bit DTX Speech Down uniform SID Control 4 Decoder 2 sampling to 1 and 2:1 8bit / A-law 10 Operation Speech frame TAF TS 26.192 11 D/A LPF Comfort Noise 5 RX MS side only GSM 03.50 Functions SID frame RECEIVE SIDE Figure 1: Overview of audio processing functions. µ 1) 8-bit A-law or -law PCM (ITU-T recommendation G.711), 8000 samples/s 2) 14-bit uniform PCM, 16 000 samples/s 3) Voice Activity Detector (VAD) flag 4) Encoded speech frame, 50 frames/s, number of bits/frame depending on the AMR-WB codec mode 5) Silence Descriptor (SID) frame. 6) TX_TYPE, 3 bits, indicates whether information bits are available and if they are speech or SID information 7) Information bits delivered to the 3G AN 8) Information bits received from the 3G AN 9) RX_TYPE, the type of frame received quantized into three bits 10) Silence Descriptor (SID) flag 11) Time Alignment Flag (TAF), marks the position of the SID frame within the SACCH multiframe ETSI 3GPP TS 26.171 version 6.0.0 Release 6 8 ETSI TS 126 171 V6.0.0 (2004-12) 5 Adaptive Multi-Rate Wideband speech codec transcoding functions The adaptive multi-rate wideband speech codec is described in [2]. As shown in Figure 1, the speech encoder takes its input as a 14-bit uniform Pulse Code Modulated (PCM) signal either from the audio part of the UE or from the network side [TBD] or from the Public Switched µ Telephone Network (PSTN) via an narrowband 13-bit A-law or -law to wideband 14-bit uniform PCM conversion. An upsampling by factor of 2 has to be performed between narrowband and wideband speech signals. The encoded speech at the output of the speech encoder is packetized and delivered to the network interface. In the receive direction, the inverse operations take place. The detailed mapping between input blocks of 320 speech samples in 14-bit uniform PCM format to encoded blocks (in which the number of bits depends on the presently used codec mode) and from these to output blocks of 320 reconstructed speech samples is described in [2]. The coding scheme is Multi-Rate Algebraic Code Excited Linear Prediction. The bit-rates of the source codec are listed in Table 1. An AMR-WB speech codec capable UE shall support all source rates listed in Table 1. Table 1: Source codec bit-rates for the AMR-WB codec. Codec mode Source codec bit-rate AMR-WB_23.85 23.85 kbit/s AMR-WB_23.05 23.05 kbit/s AMR-WB_19.85 19.85 kbit/s AMR-WB_18.25 18.25 kbit/s AMR-WB_15.85 15.85 kbit/s AMR-WB_14.25 14.25 kbit/s AMR-WB_12.65 12.65 kbit/s AMR-WB_8.85 8.85 kbit/s AMR-WB_6.60 6.60 kbit/s AMR-WB_SID 1.75 kbit/s * (*) Assuming SID frames are continuously transmitted 6 Adaptive Multi-Rate Wideband speech codec ANSI C-code The ANSI –C-code of the speech codec, VAD and CNG system are described in [3]. The ANSI C-code is mandatory. 7 Adaptive Multi-Rate Wideband speech codec test vectors A set of digital test sequences is specified in [4], thus enabling the verification of compliance, i.e. bit- exactness, to a high degree of confidence. The test sequences are defined separately for: - The speech codec described in [2], - The VAD described in [6] , ETSI 3GPP TS 26.171 version 6.0.0 Release 6 9 ETSI TS 126 171 V6.0.0 (2004-12) - The CN generation described in [7] The adaptive multi-rate wideband speech transcoder, VAD, SCR system and comfort noise parts of the audio processing functions (see Figure 1) are defined in bit exact arithmetic. Consequently, they shall react on a given input sequence always with the corresponding bit exact output sequence, provided that the internal state variables are also always exactly in the same state at the beginning of the test. The input test sequences provided shall force the corresponding output test sequences, provided that the tested modules are in their home-state when starting. The modules may be set into their home states by provoking the appropriate homing-functions. NOTE: This is normally done during reset (initialisation of the codec). Special inband signalling frames (encoder-homing-frame and decoder-homing-frame) described in [2] have been defined to provoke these homing-functions also in remotely placed modules. At the end of the first received homing frame, the audio functions that are defined in a bit exact way shall go into their predefined home states. The output corresponding to the first homing frame is dependent on the codec state when the frame was received. Any consecutive homing frames shall produce corresponding homing frames at the output. 8 Adaptive Multi-Rate Wideband speech codec source controlled rate operation The source controlled rate operation of the adaptive multi-rate wideband speech codec is defined in [5]. During a normal telephone conversation, the participants alternate so that, on the average, each direction of transmission is occupied about 50 % of the time. Source controlled rate (SCR) is a mode of operation where the speech encoder encodes speech frames containing only background noise with a lower bit-rate than normally used for encoding speech. A network may adapt its transmission scheme to take advantage of the varying bit-rate. This may be done for the following two purposes: 1) In the UE, battery life will be prolonged or a smaller battery could be used for a given operational duration. 2) The average required bit-rate is reduced, leading to a more efficient transmission with decreased load and hence increased capacity. The following functions are required for the source controlled rate operation: - a Voice Activity Detector (VAD) on the TX side; - evaluation of the background acoustic noise on the TX side, in order to transmit characteristic parameters to the RX side; - generation of comfort noise on the RX side during periods when no normal speech frames are received. The transmission of comfort noise information to the RX side is achieved by means of a Silence Descriptor (SID) frame, which is sent at regular intervals. 9 Adaptive Multi-Rate Wideband speech codec voice activity detection The adaptive multi-rate wideband VAD function is described in [6]. ETSI