Index Sr. No. Particulars Page No. 1.0 General 1 1.1 Abbreviations used in brochure 1 1.2 Definitions 1 2.0 Eligibility 2 2.1 Educational Qualification 2 2.2 Other Eligibility Criteria 2 2.3 Criteria for Eligibility as Maharashtra State Candidate 3 2.4 General notes on Eligibility 3 3.0 Allocation and Reservation of Seats 4 3.1 Seats Available for Admission to Direct Second Year 4 3.1.1 Seats Available for Allotment through Competent Authority: 4 3.1.2 Seats Available with the Institutes 4 3.2 Allocation of seats 4 3.3 Reservation of Seats 4 3.3.1 Reservation for Backward Class category Candidates 5 3.3.2 Reservation for Physically Handicapped Candidates 5 3.3.3 Reservation for Son/Daughter of Defence service personnel 5 3.3.4 Reservation for Female 6 4.0 Group and Subgroup of Courses for Admissions 6 5.0 Assignment of Merit Number 8 5.1 General Merit List of all Diploma Candidates 9 5.2 General Merit List of all B. Sc. Candidates 9 6.0 Admission Rounds 9 6.1 CAP Rounds for candidates 10 6.1.1 CAP Rounds I/II : Direct Allotment 10 6.1.2 Logic for Allotment 10 7.0 Fees, Concessions, Cancellations and Refund 12 7.1 Fees Prescribed for Govt and Govt. Aided including Autonomous Institutes 12 7.2 Fees prescribed in Unaided Engineering Colleges including Autonomous 13 Institutes 7.3 University fees 13 7.4 Caution Money Deposits : 13 7.5 Concession in Tuition and Other Fees 13 7.5.1 EBC Concession 13 7.5.2 Concession in fees for Backward Class Category Candidates ( For 13 Maharashtra State only) in Unaided private institutes 7.6. Cancellation of Admission 14 7.7 Refund of Tuition, Development and Other fees after cancellation of 14 admission secured through CAP rounds-I/II/III, in Institute level Round(s) and Vacancy Round(s) of admissions in Government, Aided, Autonomous Institutes,University Departments, etc. and Unaided Institutes 7.8 Refund Cases after cancellation of admission 14 8.0 Actions to be taken in case of excess admissions, late uploading of admitted 14 candidates and refund of fees after cancellation of admission 8.1 Excess admissions 14 8.2 Late uploading of Admitted candidates on DTE web site 15 8.3 Refund Cases after cancellation of admission 15 9.0 Miscellaneous 16 10.0 Hostel accommodation 16 11.0 Conduct and Discipline for all students & college 16 12.0 Legal jurisdiction 17 13.0 Undertaking 17 Proforma A & B 18 Proforma C & D 19 Proforma E 20 Proforma F 21 Proforma F-1 22 Proforma H 23 Proforma I 24 Proforma O 25 Annexure-I Steps of Centralised Admission Process 26 Annexure-II Documents to be attached along with the Online Application form for CAP 31 and Admission Annexure-III Admission Rounds at the Institute level by counseling for seats remaining 35 vacant after CAP Rounds in Govt., Govt. Aided, Govt. Aided University Managed Institutes, University Departments and Un Aided Institutes Annexure-IV Institute Information 38 Annexure -V Choice Codes 110 Direct Second Year Engineering/Technology GOVERNMENT OF MAHARASHTRA DIRECTORATE OF TECHNICAL EDUCATION, MUMBAI Rules for Admission to Direct Second year of four year Degree Courses in Engineering / Technology for the year 2012-2013 Ref : GR No. टीईएम-२०१२/(ू.ब. १३२)/ तांिश-४, उच्च व तंऽिशक्षण िवभाग, मंऽालय, मुंबई िद. १९ जुलै २०१२ 1.0 General: These rules are applicable for Admission to Direct Second Year of Four Year Degree Courses in Engineering/ Technology in. • All Government, Government Aided Engineering Colleges, including autonomous, in Maharashtra State. • All Govt. Aided and Unaided University Managed Engineering Colleges in Maharashtra State (including Dr. Babasaheb Ambedkar Technological University, Lonere & Laxminarayan Institute of Technology, Nagpur). • University Departments of Chemical Technology in SGB Amravati & North Maharashtra Universities in Maharashtra State (except UDCT Aurangabad). • All Unaided Engineering Colleges, including Autonomous and Minority, in Maharashtra State. These rules also incorporate the guidelines for Admission to Direct Second Year Degree Courses in Engineering/Technology Admissions to be carried out by the Unaided Institutes for the seats remaining vacant after the completion of Centralised Admission Process. ( Ref. Annexure-III). 1.1 Abbreviations used in the Brochure: AICTE All India Council for Technical Education B.Sc. Bachelor of Science CAP Centralised Admission Process DTE Director of Technical Education, Maharashtra State HSC Higher Secondary Certificate SSC Secondary School Certificate ARC Application Form Receipt Center MSBTE Maharashtra State Board of Technical Education, Mumbai GOI Government of India TFWS Tuition Fee Waiver Scheme J & K Jammu and Kashmir FS Foreign Students PIO Persons of Indian Origin UGC University Grants Commission, New Delhi 1.2 Definitions: (cid:131) ‘State Government’ means the Government of Maharashtra. (cid:131) ‘Director’ means the Director of Technical Education, Maharashtra State. (cid:131) ‘Competent Authority’ means the Authority designated or appointed by the Government to invite applications, and implement the Admission Procedure as prescribed in the Brochure. Director of Technical Education is the Competent Authority. (cid:131) ‘Representative of the Competent Authority’ means an officer appointed to assist Competent Authority for smooth conduct of Admission Process as per the Directives of the Competent Authority. (cid:131) Application form Receipt Center (ARC) is an Institution/Center from where a Candidate can procure information form, submit online application form and confirm the online application form. DTE,M umbai 1 Information Brochure 2012 Direct Second Year Engineering/Technology (cid:131) ‘College’ or ‘Institution’ means Engineering College or Technological Institution duly approved by the AICTE and Government of Maharashtra to impart Education in Engineering and Technology at degree level. (cid:131) ‘Government Engineering College’ means the Engineering College runs by the Government of Maharashtra. (cid:131) ‘Government Aided Engineering College/Institute’ means Engineering College/Institute runs by Private Management but which receives financial assistance from the Government of Maharashtra. (cid:131) ‘University Managed Engineering College/Institute’ means Engineering College/ Institute runs by a Particular University. (cid:131) ‘University Department’ means a Department of University which offers four year Degree Courses in Engineering/Technology. (cid:131) ‘Un-Aided Engineering College/Institute means Engineering College/Institute runs by private management on self- financing basis. (cid:131) Autonomous Institute means the Institute for which Autonomy is Granted by the Govt. of Maharashtra. (cid:131) ‘Sanctioned Intake’ means the course wise number of seats Sanctioned by the Government Resolution with Reference to the AICTE’s Approval. (cid:131) ‘Inter se merit’ means the order of Merit as defined by Maharashtra State Merit list. (cid:131) ‘Candidate’ means an applicant who desires to seek Admission to Second Year of four year Degree Courses in Engineering/Technology in Maharashtra State by submitting the prescribed application form. (cid:131) ‘Course” means four year Degree Course/Programme in Engineering/Technology. (cid:131) “Diploma” means Diploma awarded by the Maharashtra State Board of Technical Education, or Diploma awarded by AICTE approved Autonomous Polytechnics in Maharashtra state or its Equivalent. (cid:131) ‘Autonomous Institute’ means the institute to which autonomy is granted by UGC under recommendation of the Government of Maharashtra & respective university. (cid:131) ‘Non Autonomous Institute’ means those institutes which are not ‘Autonomous Institutes’. 2.0 Eligibility: 2.1 Educational Qualification The Candidate must be an Indian National and should have passed Post-SSC or Post-HSC Diploma Course in Engineering/Technology with at least 45 % marks (40 % marks in case of candidates of backward class categories and Physically Handicapped belonging only to Maharashtra State) in appropriate branch of Engineering / Technology from an AICTE approved Institution with English as the medium of instruction at Diploma level. OR The Candidate must be an Indian National and should have passed B.Sc. Degree from a UGC / Association of Indian Universities recognized University with at least 45% marks (40 % marks in case of candidates of Backward class categories and Physically Handicapped belonging only to Maharashtra State) and passed XII standard examination with Mathematics as the subject and with English as the medium of instruction at B.Sc. level. Note:- • The students belonging to B.Sc. Stream shall only be considered after filling the seats in this category with students belonging to the Diploma Stream and students belonging to B.Sc. stream are required to pass the subjects of Engineering Graphics / Engineering Drawing and Engineering Mechanics of the first year Engineering program along with the second year subjects. • In case percentage, marks in the Diploma/ B. Sc Examination comes in fraction then percentage of marks shall be rounded off as explained in the example for the purpose of deciding the eligibility of the candidate. Example: - If the percentage of marks comes out to be 39.50% to 39.99% then it shall be rounded to 40% and if the percentage of marks comes out to be 39.01% to 39.49% then it shall be rounded to 39%. 2.2 Other Eligibility Criteria: Candidates who have passed Diploma in Electronics Production and Maintenance from the Center of Electronics Design and Technology, Aurangabad are Eligible for an additional seat which is DTE,M umbai 2 Information Brochure 2012 Direct Second Year Engineering/Technology available for the course of Electronics & Telecommunication at Government College of Engineering, Aurangabad. This seat will be over and above the actual vacancy position for the course. 2.3 Criteria for Eligibility as Maharashtra State Candidate: A Candidate is considered Eligible for Admission to Direct Second Year of Degree Courses in Engineering / Technology through CAP subject to Fulfillment of any one of the Eligibility Criteria as listed in the following table. Sr. Type of Eligibility Eligibility Requirement No candidature Candidate Passing SSC (Std.X)/HSC (Std.XII) Examination or any other Equivalent Examination from a Recognized School / College in Maharashtra State and 1. Maharashtra State Type "A" Diploma Examination / B. Sc Examiniation as specified in rule 2.1 from a Recognized Institution in Maharashtra State. and Candidate is Domiciled/Born in the State of Maharashtra. Candidate/ Does not satisfy as Type - A Candidate Father or Mother and 2. Type "B" is Maharashtra Candidate / Father or Mother of the candidate is Domiciled Domiciled in the State of Maharashtra. Does not satisfy as Type -A and Type-B Candidate and Sons and Daughters Father/Mother of the candidate is an employee of the of Central Govt. / Government of India or Government of India 3 Govt. of India Type "C" Undertaking who is posted and reported to duty in Undertaking Maharashtra State before the last date for Employee submitting the Application Form for Centralized Admission. Sons and Daughters of Does not satisfy as Type –A, Type-B and Type-C Maharashtra State/ Candidate Maharashtra State and Undertaking Father/ Mother of the candidate is an employee of the Type "D" Employees. Government of Maharashtra/ Government of Maharashtra Undertaking. Such candidates are 4 required to submit the proof of his/her father/ mother being the employee of Government of Maharashtra/ Government of Maharashtra Undertaking. 2.4 General Notes on Eligibility: • Candidate Passing SSC (Std. X)/ HSC (Std. XII) / any other Equivalent Examination and /or Diploma Examination / B. Sc. examination as specified in rule 2.1 from a Recognized Institution situated outside the State of Maharashtra. and not satisfying any of the conditions stated in Sr. No. 2, 3, 4 (i.e. Type B,C,D) above as regards to their parent’s status are not eligible for Admission through CAP and also in Govt./Govt. Aided/ Govt. Aided University Managed Institutes/ University Departments for any Subsequent Institute Level Rounds. • Female Candidates are not eligible for Admission to Mining Engineering course, and the male Candidates seeking Admission for this course must be free from ∗colour blindness, *defective vision and * vision requiring correction with spectacles above power three dopters. • Only female Candidates shall be admitted in Engineering Colleges and Institutes which are reserved for women/girls. • Admission of any Candidate made at the Institution shall be provisional, subject to the final Eligibility Certification from the concerned University and the final approval to the admitted DTE,M umbai 3 Information Brochure 2012 Direct Second Year Engineering/Technology Candidates of Second Year Degree Engg. Course by the DTE. If Candidate fails to get Eligibility, his Admission may be cancelled at any stage. 3.0 Allocation and Reservation of Seats: 3.1 Seats Available for Admission to Direct Second Year: These Seats are Classified as Follows: The seats available with the Competent Authority for the CAP are as follows: I. Lateral Entry Seats: 20% of sanctioned intake, which will be over and above, supernumerary to the approved intake. II. Seats Remaining Vacant within Sanctioned Intake (S) : In addition to above, vacant seats (S) in a course, S = SI– ( Admitted within SI – C – F + B - L + P), and if S >0, may also be available where, SI = Sanctioned Intake Admitted = Admitted within Sanctioned Intake within SI C* = No. of cancellations at the first year level = No. of students not eligible for admission to second year as per rules/rules by F* affiliating University = No. of students who belong to earlier batches who have become eligible for B* admission to second year as per rules/rules by affiliating University = No. of Students who are shifted from the Institute to another Institute and/or L* from the course to other course within institute for the Second Year. = No. of students who are shifted to the Institute from another Institute and/or to P* the course from other course within institute for the Second Year. *Students admitted against any type of supernumerary seat/s shall not be considered in C, F, B, L or P. If the Result of the University/Institute is not declared till the last date of Calculation of the Vacant Seats within SI as per schedule, then the value of B is to be taken as total number of candidates who belong to earlier batches and appeared for examination during last academic year. # Transfer as per GR No. TEM-1092/[5311]/TE-1, dated 6th October 1992 of the Department of Higher and Technical Education, Maharashtra State, or Subsequent Government order if any. Transfer to the Course shall be effected only after accommodating Repeaters, to such an extent if and only if the S > 0 after declaration of the result. III. Seperate division in Second Year Engineering/Technology Courses: These Seats shall be as per the Sanctioned intake approved by AICTE for seperate division in Second Year of Engineering/Technology Courses. 3.1.1 Seats Available for Admission through Competent Authority: 100% of the seats available with the Competent Authority in Government, Government Aided Engineering Colleges & Unaided Institutions except unaided Minority Colleges shall be filled through CAP. Seats available with the competent authority for Admission to Direct Second year in unaided Minority Colleges shall be filled through CAP & at the Respective Minority Institutes in a ratio as communicated by the respective minority Institute. 3.1.2 Seats Available with the Institutes: Seats remaining vacant after CAP Rounds: After completion of the CAP Rounds, if any vacancy remain from amongst the total number of seats available with the Competent Authority either due to non allotment, cancellations or due to non reporting of Candidates, will be permitted to be filled by the Respective Institutes with prior approval from the DTE subject to the condition that there will not be any excess admissions. Minority Seats: The Unaided Minority Institute can admit the Minority Candidate as per the guidelines given in Annexure III. 3.2 Allocation of Seats: The seats shall be allotted as per the inter-se-merit in General Merit list of Diploma candidates. 3.3 Reservation of Seats: The reservation for ,Backward Class category candidates ,Physically Handicapped candidates,Female candidate, Son/Daughter of Defence Personnel shall be applicable. The seats shall be distributed in such a way that the percentage of reservation shall be followed at state level. The decision of Competent Authority regarding distribution of seats amongst various backward class categories / DTE,M umbai 4 Information Brochure 2012 Direct Second Year Engineering/Technology physically handicapped categories / Female/ Defence Category/ branches of engineering shall be mandatory for all the applicants/ institutes. 3.3.1 Reservation for Backward Class category Candidates: The percentage of seats reserved for candidates of backward class categories belonging to Maharashtra State is as per the details in table given below. The percentages of reservation are the percentages of the seats available for Maharashtra candidates, which are coming under the purview of the Competent Authority. These are the minimum percentages of reservation exclusive of the backward class candidates securing allotment through General Merit by virtue of merit. Backward class candidates shall claim the category to which they belong to at the time of submission of application. Sr. Percentage of Category of Reservation No. Reservation 1. Scheduled Castes and Schedule caste converts to Buddhism ( SC) 13.0 % 2. Schedule Tribes (ST) 7.0 % 3. Vimukta Jati (VJ)/De notified Tribes( DT) (NT-A) 3.0 % 4. Nomadic Tribes 1 (NT-B) 2.5 % 5. Nomadic Tribes 2 (NT-C) 3.5 % 6. Nomadic Tribes 3 (NT-D) 2.0 % 7 Other Backward Classes (OBC) 19.0 % Total 50.0 % Note: 1. The reservation for backward class candidate i.e. 50% as stated above shall be available in Government, Government Aided Institutes, University Dept. , University Managed Institutes and Unaided Non-Minority institutes. 2. Candidates belonging to Special Backward Class (SBC) will be offered reservation up to 2% seats of the CAP seats of a choice code subject to condition that any seats remain vacant in the reserved category at the end of stage–I of allotment. These seats are carved out during the allotment stage-I and no separate seats are earmarked before the start of the allotment process. SBC candidates having original category OBC will be considered at par with OBC candidates. 3.3.2 Reservation for Physically Handicapped Candidates: As per the provisions in Clause 39 of Equal Opportunities, Protection of Rights and Full Participation Act 1995, three percent (3%) seats of CAP Seats shall be reserved for physically handicapped candidates. (cid:190) visually impaired (blind) candidates (P1) (cid:190) speech & hearing impaired (deaf & dumb) candidates, (P2) (cid:190) Orthopedic disorders, learning disabilities, Dyslexia, Dyscalculia, Dysgraphica, Spastic (P3) Allotment of the seats reserved for the Physically Handicapped candidates shall be done on the basis of a respective inter-se merit of respective category of such candidates. These seats are available only for Maharashtra Domiciled candidates. Note:- It should be noted that the physically handicapped candidates on admission to Engineering / Technology degree course will not be given any exemptions or additional facilities in the academic activities other than those which may be provided by the respective Universities. Further it is specifically brought to the notice of Physically Handicapped candidates that, they should submit the certificates strictly as per the Proforma– F/F-1. 3.3.3 Reservation for Son/Daughter of Defence service personnel Five (5) % seats of the CAP seats for an institute, subject to a maximum of five (5) seats in each institute and maximum one seat per course/branch coming under CAP shall be reserved for • Children of ex- service personnel who are domiciled in Maharashtra State (DEF-1). • Children of active service personnel who are domiciled in Maharashtra State (DEF-2). • Children of active service personnel (DEF-3) – (cid:190) Who are transferred to Maharashtra State but are not domiciled in Maharashtra State, (cid:190) Who are not domiciled in Maharashtra State but their families are stationed in Maharashtra State under the provision of retention of family accommodation at the last duty station on DTE,M umbai 5 Information Brochure 2012 Direct Second Year Engineering/Technology grounds of children’s education provided further that, such candidate should have appeared and passed the Diploma examination of Maharashtra State Board of Technical Education or its equivalent examination from a Polytechnics / institute situated in the State of Maharashtra. A combined single merit list of all eligible DEF1, DEF2 & DEF3 candidates shall be prepared. Admission against the Defence category seats will be made strictly on the basis of inter-se-merit combined single merit list of all eligible DEF1, DEF2 & DEF3 candidates. Refer Pro forma C, D and E for claiming this provision. Note:- This provision is NOT available to the children of CIVILIAN STAFF who is working / who has worked in the Indian Defence Service. 3.3.4 Reservation for Female As per the provisions in Govt. Resolution No. GEC-1000/ (123/2000)/ Tech. Edu.-1, dated 17th April, 2000, 30% of CAP seats shall be reserved for female candidates in all the courses of the institutions coming under CAP. This reservation shall be applicable for General, SC, ST, DT/VJ (NT-A), NT-B, NT-C, NT-D and OBC categories. There shall be no reservation for Female candidates under Defence, Physically Handicapped and SBC categories. 4.0 Group and Subgroup of Courses for Admissions: The groups and subgroups of Diploma Courses and Corresponding Degree Courses for which Admissions to Direct Second Year shall be given are as below. Admissions will be effected to Diploma holders of a subgroup for Degree Courses mentioned in the same subgroup. Thereafter “vacant seats”, if any, will be offered to Candidates from other subgroups (Diploma), under the same group, who are Eligible for Corresponding Degree Courses from the group. For this purpose group merit list will be operated. Groups and Sub-groups of Diplomas for which preference will be given for Admission to Degree Courses: Group Diploma Courses Degree Courses No. 01 Chemical Engineering Group :- 0101 : Sub-group : A 1. Chemical Engineering 1. Chemical Engineering 2. Chemical Technology 2. Chemical Technology 3. Petro-Chemical Engineering 3. Petro-Chemical Engineering 4. Technical and Analytical Chemistry 4. Petroleum Engineering 5. Pulp & Paper Technology Note.- Direct Admission to second year Degree is given for Chemical Technology Courses in Food Technology, Oil Technology, Fats & Wax Technology, Pulp & Paper Technology, Petro-Chemical Technology, Oil & Paint Technology, Paints Technology and Plastic Technology only in UDCT, Jalgaon & UDCT, Amravati. 0102 : Sub-group : B 1. Plastic Engineering 1. Polymer Engineering 2. Polymer and Plastic Engineering 2. Polymer Technology 3. Plastic Technology 3. B. Tech. Plastic and Polymer Engineering 4 Rubber Technology 4. Plastic Technology 0103 : Sub-group : C 1. Sugar Technology 1. Sugar Technology 0104 : Sub-group : D 1. Food Technology 1. Food Technology 0105 : Sub-group : E 1. Oil & Paints Technology 1. Surface Coating Technology 2. Oil Technology 2. Oil & Paints Technology 3. Paints Technology 4. Fats & Wax Technology 5. Surface Coating Technology DTE,M umbai 6 Information Brochure 2012 Direct Second Year Engineering/Technology 02 Civil Engineering Groups : - 0201 : Sub-group : A 1. Civil Engineering 1. Civil and Rural Engineering 2. Construction Engineering 2. Civil & Sanitary Engineering 3. Civil & Water Management Engg. 3. Civil Engineering 4. Environmental Engineering 4. Construction Technology 5. B. Tech. Civil Engineering 5. Environmental Technology 6. Structural Engineering 03 Computer, Electronics, Electrical, Instrumentation & Bio-Medical Engineering Group :- 0301 : Sub-group : A 1. Computer Engineering 1. Computer Engineering 2. Computer Technology 2. Computer Technology 3. Information Technology 3. Computer Science and Engineering 4. Information Technology 5. B. Tech. Computer Science and Engineering 0302 : Sub-group : B 1. Digital Electronics 1. Electronics and Communication 2. Electronics and Communication Engineering Engineering 2. Industrial Electronics Engg. 3. Electronics and Video Engg. 3. Electronics Engineering 4. Sound & Television Engineering 4. Electronics Product Design Technology 5. Electronics and Tele. Engineering 5. Power Electronics 6. Industrial Electronics 6. Electronics and Tele Communication 7. Electronics & Radio Engineering Engineering 8. Electronics Engineering 7. B. Tech. Electronics and Tele 9. Electronics Production &Maintenance Communication Engineering 10. Electronics 0303 : Sub-group : C 1. Medical Electronics 1. Bio-Medical Engineering 0304 : Sub-group : D 1. Electrical Engineering 1. Electrical Engineering 2. Electrical Power System 2. Electrical Engineering (Electrical & Power) 3. Electronics and Power Engineering 4. Power Engineering 0305 : Sub-group : E 1. Instrumentation 1. Instrumentation Engineering 2. Instrumentation and Control 2. B. Tech. Instrumentation & Control Engineering 04 Mechanical Engineering Group :- 0401 : Sub-group : A 1. Automobile Engineering 1. Automobile Engineering 2. Fabrication Technology 2. Mechanical Engineering 3. Mechanical Engineering 3. Mechanical Engineering (Sandwich Pattern) 4. Fabrication Technology and 4. B. Tech. Mechanical Engineering Erection Engineering 5. Aeronautical Engineering 0402 : Sub-group : B 1. Machine Tool and Maintenance 1. Industrial Engineering 2. Plant Engineering 2. Production Engineering 3. Production Technology 3. Production Technology 4. Production Engineering 4. Production Engineering (Sandwich Pattern) 5. Advanced Diploma in Tool and 5. B. Tech. Production Engineering Die Making 0403 : Sub-group : C 1. Packaging Technology 0404 : Sub-group : D 1. Metallurgical Engineering 1. Metallurgy 2. Metallurgy (Foundry Technology) DTE,M umbai 7 Information Brochure 2012 Direct Second Year Engineering/Technology 05 Mining Engineering Group :- 0501 : Sub-group : A 1. Mining and Mine Surveying 1. Mining Engineering 2. Mining Engineering 06 Printing Engineering Group :- 0601 : Sub-group : A 1. Printing Engineering & Graphics 1. Printing Technology Communication 07 Textile Engineering Group :- 0701 : Sub-group : A 1. Knitting Technology 1. Man made Textile 2. Man made Fibre Manufacturing 2. Textile Engineering / Technology 3. Textile Manufacture (Cotton) 3. Textile Plant Engineering 4. Man made Textile Technology 4. Textile Engineering ( Fashion Technology) 5. Garment Technology 6. Dress Designing & Garment Mfg. 7. Handloom Technology 0702 : Sub-group : B 1. Man made Textile Chemistry 1. Textile Chemistry 2. Textile Technology 3. Textile and Analytical Chemistry 4. Technical Chemistry In addition to above Groups and Subgroups, Candidates passing Diploma Courses from different Special Groups as listed below are also eligible to give the course choice code of some specific Degree Courses as listed below in addition to their choice codes of Respective Groups. Special Diploma Courses Degree Courses Group No. 08 0801 : Sub-group : A 1. Chemical Engineering 2. Chemical Technology 3. Technical and Analytical Chemistry 1. Biotechnology 4. Sugar Technology 5. Food Technology 6. Environmental Technology 7. Medical Electronics and Technical Chemistry 09 0901 : Sub-group : A 1. Mechanical Engineering 1. Sugar Technology 2. Production Engineering 3. Plant Engineering 4. Instrumentation Engineering 5.Instrumentation and Control Engineering Refer Annexure IV for the Institute information like contact number, name, address, website etc. for updated and detailed information, search for Engineering Institutes on http://www.dte.org.in -> Search Institutes Refer Annexure V for Choice code of all Courses. 5.0 Assignment of Merit Number: The directorate shall prepare and publish two separate merit lists viz. General Meit List of all Diploma Candidates and General Meit List of all B. Sc Candidates. If letter grades are assigned instead of marks at SSC, HSC or its equivalent examination, Diploma examination / B. Sc. examination, the candidate must obtain the certificate of conversion of letter of grades into equivalent marks from the Competent Authority where from the candidate has passed such examination. The candidate should produce such certificate at the time of submission of application form. The Eligibility shall be decided based on the equivalent marks submitted by such candidates. DTE,M umbai 8 Information Brochure 2012