Prof. Alexandre DOLGUI PUBLICATIONS Dr. Alexandre Dolgui is a Full Professor of Exceptional Class and the Deputy Director of LIMOS UMR CNRS 6158 and Henri Fayol Institute at the Ecole des Mines de Saint-Etienne (France). His research focuses on manufacturing line design, production planning and supply chain optimization. His main results are based on the exact mathematical programming methods and their intelligent coupling with heuristics and metaheuristics algorithms. He is the co- author of 5 books, the co-editor of 14 books or conference proceedings, the author of 186 refereed journal papers, book chapters and editorials as well as over 360 papers in conference proceedings. He is the Editor-in-Chief of the International Journal of Production Research, an Area Editor of Computers & Industrial Engineering, and an Associate Editor of the Omega-the International Journal of Management Science, and Journal Européen des Systèmes Automatisés, past Associate Editor of International Journal of System Sciences (2005-2008) and IEEE Transactions on Industrial Informatics (2006-2010). He is Member of the Editorial Boards of the International Journal of Production Economics, International Journal of Manufacturing Technology & Management, International Journal of Simulation & Process Modelling, International Journal of Engineering Management & Economics, Journal of Decision Systems, Journal of Mathematical Modelling & Algorithms, Journal of Operations and Logistics, Journal of Industrial Engineering and Management & Production Engineering Review. Fellow of the European Academy for Industrial Management, Member of the Board of the International Foundation for Production Research, Chair of IFAC TC 5.2 Manufacturing Modelling for Management and Control, Member of IFIP WG 5.7 Advances in Production Management Systems, and Guest editor of special issues of Journal of Intelligent Manufacturing, International Journal of Production Research, International Journal of Production Economics, Journal of Mathematical Modeling and Algorithms, European Journal of Operational Research and Annual Reviews in Control; he was General Scientific Chair of the 12th IFAC symposium INCOM'06, Chairman of International Program Committee of SCM’02, MOSIM’04, INCOM'09, INCOM'12, IESM'13, MIM'13, and INCOM'15, Chairman of Organizing Committee of the International Conference MOSIM’01 and ROADEF'2011; last ten years, he was Member of Program Committees of over 150 International Conferences, etc. He has been responsible of the French national CNRS working group on Design of Production Systems (with about 336 individual members) and the regional project on Design and Management of Reconfigurable Manufacturing Systems. For more details see: www.mines-stetienne.fr/~dolgui IIE Transactions on Design and Manufacturing Best Paper Award 2008: MIP Approach to Balancing Transfer Lines with Blocks of Parallel Operations, IIE Transactions, 2006, vol. 38, p. 869–882. Institute of Industrial Engineers, United States, www.iienet.org BOOKS (AUTHOR) 1. A. Dolgui, J.-M. Proth. Supply Chains Engineering: Useful Methods and Techniques. Springer, 2010, (ISBN: 978-1-84996-016-8), 539 pages. 2. A. Dolgui, J.-M. Proth. Systèmes de production modernes. Tome 1 : Conception, gestion et optimisation. Hermès Science, London, 2006, (ISBN: 2-7462-1249-8), 415 pages. 3. A. Dolgui, J.-M. Proth. Systèmes de production modernes. Tome 2 : Outils et exercices corrigés. Hermès Science, London, 2006, (ISBN: 2-7462-1250-1), 385 pages. 4. N. Guschinsky, G. Levin, A. Dolgui. Decision-making Support in Transmission System Design, Publishing House “Belarusian Science”, Minsk, 2006, (ISBN: 985- 08- 0755- 5), 262 pages. (in Russian) 5. D. Ofitserov, A. Dolgui, V. Starych. Programming on Personal Computer: Tutorials, Publishing House “Vyscheichaïa chkola”, Minsk, 1993, (ISBN: 5-339-00809-6), 256 pages. (in Russian) - 1 - BOOKS (EDITOR) 6. Manufacturing Modelling, Management and Control 2013: The Proceedings of the IFAC International Conference, St Petersburg, Russia, 19-21 June 2013, N. Bakhtadze, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2). 7. Information Control Problems In Manufacturing 2012: The Proceedings of the 14th IFAC International Symposium, Bucharest, Romania, 23-25 May 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2). 8. Information Control Problems In Manufacturing 2009: The Proceedings of the 13th IFAC International Symposium, Moscow, Russia, 3-5 June 2009, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2) 9. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 1: Information Systems, Control and Interoperability, 838 pages. 10. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 2: Industrial Engineering, 800 pages. 11. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 3: Operational Research, 702 pages. 12. Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Springer, 2005, XVI, (Hardcover ISBN : 0-387- 23566-3), 289 pages. 13. Modélisation et simulation pour l’analyse et l’optimisation des systèmes industriels et logistiques, Actes de la 5e conférence francophone de Modélisation et Simulation (MOSIM’04), A. Dolgui, S. Dauzère-Pérès (Eds.), Lavoisier, 2004, (ISBN : 2-7430-0731-1), vol. 1, 580 pages. 14. Modélisation et simulation pour l’analyse et l’optimisation des systèmes industriels et logistiques, Actes de la 5e conférence francophone de Modélisation et Simulation (MOSIM’04), A. Dolgui, S. Dauzère-Pérès (Eds.), Lavoisier, 2004, (ISBN : 2-7430-0731-1), vol. 2, 560 pages. 15. Production System Design, Supply Chain Management and Logistics, Proceedings of the International Conference SCM’02, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Miedzyzdroje, October 23-25 2002. Informa, Szczecin, Poland, 2002, (ISBN: 83-86362-46-8), Part I, 355 pages. 16. Production System Design, Supply Chain Management and Logistics, Proceedings of the International Conference SCM’02, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Miedzyzdroje, October 23-25 2002. Informa, Szczecin, Poland, 2002, (ISBN: 83-86362-46-8), Part II, 302 pages. 17. Conception, analyse et gestion des systèmes industriels, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM’01), A. Dolgui, F. Vernadat (Eds.), SCS Publishing House, 2001, vol. 1, (ISBN: 1-56555-212-1), 540 pages. 18. Conception, analyse et gestion des systèmes industriels, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM’01), A. Dolgui, F. Vernadat (Eds.), SCS Publishing House, 2001, vol. 2, (ISBN: 1-56555-212-1), 550 pages. 19. New Information Technologies in Education. Proceedings of the 2nd International Conference (NITE’96), V. Shmerko, J. Soldek, A. Dolgui and S. Yanuchkevitch (Eds.), 12-14 November 1996, Minsk, Economic University of Belarus (ISBN: 83-86359-44-7), 403 pages. BOOK CHAPTERS 20. O. Hazır, A. Dolgui. Robust Assembly Line Balancing: State of the Art and New Research Perspectives, Chapter in Sequencing and Scheduling with Inaccurate Data, Yu. Sotskov, F. Werner (Eds.), Nova Science Publishers, 2014 21. X. Delorme, O. Battaïa, A. Dolgui. Multi-objective Approaches for Design of Assembly Lines, Chapter 2 in: Multi-Criteria and Game Theory Applications in Manufacturing and Logistics, L. Benyoucef, J.-C. Hennet and M.K. Tiwari (Eds.), Springer Series in Advanced Manufacturing, Springer, 2013, p. 29–55. - 2 - 22. F. Makssoud, O. Battaïa, A. Dolgui. Reconfiguration of Machining Transfer Lines, Chapter 22 in: Service Orientation in Holonic and Multi-agent Manufacturing and Robotics, T. Borangiu, A. Thomas and D. Trentesaux (Eds.), Studies in Computational Intelligence, vol. 472, 2013, (ISBN 978-3-642-35851-7), Springer, p. 339–354. 23. A. Dolgui, M. Pashkevich. Beta-Binomial Model and its Generalizations in the Forecasting Demand for Multiple Slow-Moving Items. Chapter 1 in: Forecasting Models - Methods and Applications, J.J. Zhu and G.P.C. Fung (Eds.), iConcept Press Ltd, 2010 (ISBN 978-0-9807330-0-6), p. 1–12. 24. A. Dolgui, F. Grimaud and K. Shchamialiova. Supply Chain Management under Uncertainties: Lot-sizing and Scheduling Rules. Chapter in: Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management. B. Grabot, L. Benyoucef (Eds.), Springer, 2010, (ISBN 978-1-84996-118-9), p. 181–220. 25. A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Decision Making and Support Tools for Design of Machining Systems. Chapter in: Strategic Information Systems: Concepts, Methodologies, Tools, and Applications, M. Gordon Hunter (Ed.), Idea Group Inc., (ISBN-13: 978-1-60566-677-8), 2009, vol. 2, Development and Design Methodologies (Reprint of the chapter from Encyclopedia of Decision Making and Decision Support Technologies made by the Publishing House). 26. X. Delorme, A. Dolgui, M. Essafi, L. Linxe and D. Poyard. Machining Lines Automation. Part D, Chapter 35 in: Springer Handbook of Automation, S.Y. Nof (Ed.), with DVD-ROM, Springer, 2009, ISBN: 978-3-540- 78830-0, p. 599–618. 27. T. Potinecke, T. Rogowski, X. Boucher, A. Dolgui, S. Agoti, C. Stylios, P.P. Groumpos, C. Heavey, P. Liston, P.J. Byrne, S. Salvador and M. Salvador. A View of SME Clusters and Networks in Europe, Chapter 2 in: A Road Map to the Development of European SME Networks: Towards a Collaborative Innovation, A. Villa and D. Antonelli (Eds.), Springer, (ISBN 978-1-84800-341-5), 2009, p. 23–60. 28. A. Dolgui, F. Hnaien, A. Louly, H. Marian. Parameterization of MRP for Supply Planning Under Uncertainties of Lead Times. Chapter 14, in: Supply Chain: Theory and Applications, V. Kordic (Ed.), I-Tech Education and Publishing, Vienna, Austria, (ISBN 978-3-902613-22-6), 2008, p. 247–262. 29. A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Decision Making and Support Tools for Design of Machining Systems. Chapter in: Encyclopedia of Decision Making and Decision Support Technologies, F. Adam and P. Humphreys (Eds.), Idea Group Inc., (ISBN-13: 978-1-59904-843-7), 2008, vol. 1, p. 155–164. 30. A. Dolgui, N. Guschinsky, G. Levin. Decision Making and Support Tools for Design of Transmission Systems. Chapter in: Encyclopedia of Decision Making and Decision Support Technologies, F. Adam and P. Humphreys (Eds.), Idea Group Inc., (ISBN-13: 978-1-59904-843-7), 2008, vol. 1, p. 165–175. 31. A.P. Pashkevich, A. Dolgui. Kinematic Control of a Robot-Positioner System for Arc Welding Application. Chapter 15, In: Industrial Robotics: Programming, Simulation and Applications, Kin-Huat Low (Ed.), pro literatur Verlag, Mammendorf, Germany, (ISBN: 3-86611-286-6), 2007, p. 293–314. 32. S. Belmokhtar, A.I. Bratcu, A. Dolgui. Modular Machining Line Design and Reconfiguration: Some Optimization Methods. Chapter 5, In: Manufacturing the Future: Concepts –Technologies – Visions, V. Kordic, A. Lazinica, M. Merdan (Eds.), pro literatur Verlag, Mammendorf, Germany, (ISBN: 3 – 86611 – 198 – 3), 2006, p. 125–152. 33. E. Kushtina, A. Dolgui, B. Malachowski. Organization of the modelling and simulation of the discrete processes. In: Information processing and security systems, Kh. Saeed, J. Pejas (Eds.), Springer, (ISBN: 0-387- 25091-3), 2005, p. 443–452. 34. A. Dolgui, M.-A. Louly, C. Prodhon. A survey on supply planning under uncertainties in MRP environments. In: Selected Plenaries, Milestones and Surveys. 16th IFAC World Congress. July 3-8, 2005, Prague, Czech Republic, 2005, P. Horacek, M. Simandl, and P. Zitek (Eds.), p. 228–239. 35. Y. Sotskov, A. Dolgui, N. Sotskova, F. Werner. Stability of optimal line balance with given station set. In: Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, Springer, (ISBN: 0-387-23566-3), 2005, p. 135–149. 36. M. Pashkevich, A. Dolgui. Consumer behavior robust modelling. In: Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, Springer, (ISBN: 0-387-23566-3), 2005, p. 55–70. 37. B. Rekiek, A. Delchambre, A. Dolgui, A. Bratcu. Assembly line design: a survey. In: Plenary Papers, Survey Papers and Milestones. The 15th Triennial World Congress of the IFAC, E.F. Camacho, L. Basañez and J.A. de la Puente (Eds.), Barcelona, IFAC, 2002, p. 131–142. - 3 - 38. O. Zaikin, A. Dolgui, P. Korytkowski. Optimization of Resource Allocation in Distributed Production Networks. In: From Theory to Practice in Multi-Agent Systems, B. Dunin-Keplicz, E. Nawarecki (Eds.), Lecture Notes in Artificial Intelligence, vol. 2296, Springer Verlag, 2002, p. 322–332. 39. A. Dolgui, N. Guschinsky, G. Levin. Computer-aided design of power transmission systems. In: Problemy Informatyki Stosowanej, R. Budzinski (Ed.), Szczecin, Poland, Informa, ISBN 83-87362-44-1, 2002, p. 125– 140 40. A. Dolgui, G. Levin. Production Planning Optimization under Unreliable Machines and Random Yield. In: Modeling and Information Technologies for Computer-Aided Design, V. Machnach, E. Vladimirov (Eds.), Academy of Science of Belarus, Minsk, 2000, p. 113–123. 41. A. Dolgui. An Inventory Control Model for Replaceable Units Planning. In: Mathematical Modeling of Information and Technological Systems, V. Sysoev (Ed.), State Technological Academy Publishing House, Voronezh, 2000, p. 11–14. 42. O. Zaikin, A. Dolgui, P. Kraszewski. Queuing modeling of the resource assignment in the High Tec assembly manufacturing. In: New Frontiers in Computational Intelligence and its Applications, M. Mohammadian (Ed.), Amsterdam, IOS Press, 2000, p. 340–346. 43. A. Dolgui, N. Guschinsky, G. Levin. Optimization in Design of Multiunit Mechanical Transmission Systems. In: Systems and Control: Theory and Applications. N. Mastorakis (Ed.), New York, WSES Press, 2000, p. 101–106. 44. V. Balaguin, A. Dolgui. Mathematical Modelling of Systems. In: Theoretic Bases of Computer Aided Management, "Vyscheïchaïa chkola" (Publishing House «Highest School»), Minsk, 1991, (ISBN 5-339-00343- 4), p. 150–175. (in Russian) 45. V. Balaguin, A. Dolgui, Y. Svirine. Design, Validation and Testing of Real Time Control Systems for Automated Production Workshop, BELNIINTI, State Committee of Plan Publishing House, Minsk, 1989, 48 pages. (in Russian) 46. V. Balaguin, A. Dolgui, M. Revotuk, M. Mogilevtsev. Modeling and Simulation of Flexible Manufacturing Systems, BELNIINTI, State Committee of Plan Publishing House, Minsk, 1988, 56 pages. (in Russian) SCIENTIFIC JOURNALS Editorials 47. A. Dolgui. In 2012 IJPR Published its 50th Volume, International Journal of Production Research, vol. 51, n°23-24, (In Press, DOI: 10.1080/00207543.2013.853434) 48. D. Ivanov, A. Dolgui. Intelligent Information and Product Technologies for Supply Chain Integration, International Journal of Integrated Supply Chain Management, vol. 8, n° 1/2/3, 2013, p. 1–4. 49. X. Delorme, A. Dolgui, A.A. Kolokolov. Complex Optimisation Problems in Locational Analysis and Scheduling, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 101-103. 50. A. Dolgui, J.-M. Proth. Special section on Radio Frequency Identification, IEEE Transactions on Industrial Informatics, vol. 8 , n° 3, 2012, p. 688. 51. A. Dolgui. Passing the Torch, International Journal of Production Research, vol. 50, n° 2, 2012, p. 307–308. 52. F. Grimaud, A. Dolgui. Discrete Event Simulation in Production and Operations Management, International Journal of Simulation and Process Modelling, vol. 6, n° 3, 2011, p. 175–176. 53. N. Bakhtadze, A. Dolgui. Planning and Control of Manufacturing and Logistic Systems, Annual Reviews in Control, vol. 34, n° 1, 2010, p. 71–72. 54. R. Askin, A. Dolgui, J.-M. Proth. Design and Analysis of Production Systems, International Journal of Production Economics, vol. 120, n° 2, 2009, p. 271–275. 55. A. Dolgui. Cutting Edge Production Research of the French Community, International Journal of Production Research, vol. 47, n° 2, 2009, p. 299–304. 56. A. Dolgui. Design and Management of Production Systems, Journal of Decision Systems, vol. 17, n° 3, 2008, p. 309–312. 57. A. Dolgui, G. Morel. Advances in Manufacturing Systems and Logistics, Annual Reviews in Control, vol. 31, n° 1, 2007, p. 105–106. - 4 - 58. A. Dolgui, A. Eremeev, V. Gordon, A. Kolokolov. Discrete Optimization Methods in Production and Logistics, Journal of Mathematical Modeling and Algorithms, vol. 5, n°2, 2006, p. 139–141. 59. A. Dolgui. Balancing Assembly and Transfer Lines, European Journal of Operational Research, vol. 168, n° 3, 2006, p. 663–665 60. S. Dauzère-Pérès, A. Dolgui. Decision Support for Industrial Engineering and Logistics, Journal of Decision Systems, vol. 14, n° 4, 2005, p. 353–354. 61. A. Dolgui. Supply Chain Management, Journal of Intelligent Manufacturing, vol. 16, n° 2, 2005, p. 135–137. 62. A. Dolgui, F. Vernadat. Design, Analysis and Management of Industrial Systems, International Journal of Production Research, vol. 40, n° 17, 2002, p. 4307–4308. 63. A. Dolgui, F. Vernadat. Conception et gestion des chaînes de production, Journal Européenne des Systèmes Automatisés, vol. 36, n° 1, 2002, p. 7–8. 64. A. Dolgui, V. Gordon, J.M. Proth. Discrete optimisation methodes in scheduling and computer-aided design: part 2, Journal of Mathematical Modelling and Algorithms (former International Journal of Mathematical Modelling), vol. 1, n° 2, 2002, p. 87–88. 65. A. Dolgui, V. Gordon, J.M. Proth. Discrete optimisation methodes in scheduling and computer-aided design: part 1, International Journal of Mathematical Modelling, vol. 2, n° 4, 2001, p. 249–250. 66. A. Dolgui, P. Lacomme. Global Optimization Techniques for Industrial Engineering, Journal of Intelligent Manufacturing, vol. 12, n° 5/6, 2001, p. 407–408. ARTICLES In refereed international journals 67. M.A. Aloulou, A. Dolgui, M.Y. Kovalyov. A bibliography of non-deterministic lot-sizing models, International Journal of Production Research, 2013, (accepted, in Press) 68. A. Dolgui, S. Kovalev, M.Y. Kovalyov, J. Nossack and E. Pesch. Minimizing setup costs in a transfer line design problem with sequential operation processing, International Journal of Production Economics, 2013, (accepted, in Press) 69. A. Dolgui, J.M. Proth. Outsourcing: definitions and analysis, International Journal of Production Research, vol. 51, n°23-24 (accepted, in Press) 70. P. Borisovsky, X. Delorme, A. Dolgui. Balancing recongurable machining lines via a set partitioning model, International Journal of Production Research, 2013 (accepted, in Press, DOI: 10.1080/00207543. 2013.849857) 71. O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Combinatorial techniques to optimally customize an automated production line with rotary transfer and turrets, IIE Transactions, (accepted, in Press) 72. E.R. Gafarov, A. Dolgui. Two-dedicated-machine scheduling problem with precedence relations to minimize makespan, Optimization Letters, 2013 (accepted, published online, DOI: 10.1007/s11590-013-0671-0). 73. O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Integrated equipment selection and line balancing for mass production machining systems with serial-parallel workplaces, Engineering Optimization, 2013 (accepted, in Press) 74. A. Dolgui, O. Ben Ammar, F. Hnaien, and M.-A. Louly, A state of the art on supply planning and inventory control under lead time uncertainty, Studies in Informatics and Control, vol. 22, n° 3, 2013, p. 255–268. 75. D. Ivanov, A. Dolgui, B. Sokolov. Multi-disciplinary analysis of interfaces “Supply Chain Event Management – RFID – Control Theory”, International Journal of Integrated Supply Chain Management, vol. 8, n° 1/2/3, 2013, p. 52–66. 76. D. Ivanov, B. Sokolov, A. Dolgui. Multi-stage supply chain scheduling with nonpreemptive continuous operations and execution control, International Journal of Production Research, 2013 (accepted, available online, DOI: 10.1080/00207543.2013.793429) 77. D. Wu, C. Luo, L. Liang, A. Dolgui. Efficiency evaluation model with constraint resource: an application to banking operations, Journal of the Operational Research Society, 2013 (accepted, available online, DOI:10.1057/jors.2012.144) - 5 - 78. P. Borisovsky, X. Delorme, A. Dolgui. Genetic algorithm for balancing reconfigurable machining lines, Computers and Industrial Engineering, vol. 66, n° 3, 2013, p. 541–547. 79. K. Schemeleva, X. Delorme, A. Dolgui, F. Grimaud, M.Y. Kovalyov. Lot-sizing on a single imperfect machine: ILP models and FPTAS extensions, Computers and Industrial Engineering, vol. 65, n° 4, 2013, p. 561–569. 80. O. Hazir, A. Dolgui. Assembly Line Balancing under Uncertainty: Robust Optimization Models and an Exact Solution Method, Computers and Industrial Engineering, vol. 65, n° 2, 2013, p. 261-267. 81. E. Gurevsky, O. Battaïa, A. Dolgui. Measure of stability for a generalized assembly line balancing problem, Discrete Applied Mathematics, vol. 161, n° 3, 2013, p. 377–394. 82. E. Gurevsky, O. Hazir, O. Battaïa, A. Dolgui. Robust balancing of straight assembly lines with interval task times, Journal of Operational Research Society, vol. 64, n° 11, 2013, p. 1607–1613. 83. A. Dolgui, A. Eremeev, M. Kovalyov, V. Sygaev. Complexity of buffer capacity allocation problems for production lines with unreliable machines, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 155-165. 84. O. Battaia, E. Gurevsky, F. Makssoud, A. Dolgui. Equipment location in machining transfer lines with multi- spindle heads, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 117-133. 85. O. Battaïa, A. Dolgui. A taxonomy of line balancing problems and their solution approaches, International Journal of Production Economics, vol. 142, n° 2, 2013, p. 259–277. 86. A. Garcia-Villoria, A. Corominas, X. Delorme, A. Dolgui, W. Kubiak, and R. Pastor. A branch and bound algorithm for the response time variability problem, Journal of Scheduling, vol. 16, n° 2, 2013 p. 243–252. 87. O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Optimal design of machines processing pipeline parts, International Journal of Advanced Manufacturing Technology, vol. 63, n° 9-12, 2012, p. 963–973. 88. M.-A. Louly, A. Dolgui. Optimal MRP parameters for a single item inventory with random replenishment lead time, POQ policy and service level constraint, International Journal of Production Economics, vol. 143, n°1, 2013, p. 35–40. 89. V. Gordon, V. Strusevich, A. Dolgui. Scheduling with due date assignment under special conditions on job processing, Journal of Scheduling, vol. 15, n° 4, 2012, p. 447–456. 90. E. Gurevsky, O. Battaïa, A. Dolgui. Balancing of simple assembly lines under variations of task processing times, Annals of Operations Research, vol. 201, n° 1, 2012, p. 265–286. 91. K. Schemeleva, X. Delorme, A. Dolgui, and F. Grimaud. Multi-product sequencing and lot-sizing under uncertainties: a memetic algorithm, Engineering Applications of Artificial Intelligence, vol. 25, n°8, 2012, p. 1598–1610. 92. O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. A decision support system for design of large series machining lines composed of stations with rotary or mobile table, Robotics and Computer Integrated Manufacturing, vol. 28, n° 6, 2012, p. 672–680. 93. A. Dolgui, S. Kovalev. Scenario Based Robust Line Balancing: Computational Complexity, Discrete Applied Mathematics, vol. 160, n° 13–14, 2012, p. 1955–1963. 94. P. Borisovsky, A. Dolgui, S. Kovalev. Algorithms and implementation of a set partitioning approach for modular machining line design, Computers and Operations Research, vol. 39, n°12, 2012, p. 3147–3155. 95. A. Dolgui, S. Kovalev. Min-Max and Min-Max Regret Approaches to Minimum Cost Tools Selection, 4OR: A Quarterly Journal of Operations Research, vol. 10, n° 2, 2012, p. 181–192. 96. M. Essafi, X. Delorme, A. Dolgui. A Reactive GRASP and Path Relinking for Balancing Reconfigurable Transfer Lines, International Journal of Production Research, vol. 50, n° 18, 2012, p. 5213-5238. 97. H. Chehade, A. Dolgui, F. Dugardin, L. Makdessian, F. Yalaoui. Multi-Objective Approach for Production Line Equipment Selection, Management and Production Engineering Review, vol. 3, n° 1, 2012, p. 4–17. 98. D. Ivanov, A. Dolgui, B. Sokolov. Applicability of optimal control theory for adaptive supply chain planning and scheduling, Annual Reviews in Control, vol. 36, n° 1, 2012, p. 73-84. 99. S. Kovalev, X. Delorme, A. Dolgui. Manufacturing line configuration to minimize setup costs, Mathematical and Computer Modelling, vol. 55, n° 9-10, 2012, p. 2087–2095. - 6 - 100. O. Battaïa, A. Dolgui. Reduction approaches for a generalized line balancing problem, Computers and Operations Research, vol. 39, n° 10, 2012, p. 2337–2345. 101. A. Dolgui, N. Guschinsky, G. Levin. Enhanced mixed integer programming model for a transfer line design problem, Computers and Industrial Engineering, vol. 62, n°2, 2012, p. 570–578. 102. P. Borisovsky, A. Dolgui, S. Kovalev. Modelling transfer line design problem via a set partitioning problem, Optimization Letters, vol. 6, n° 5, 2012, p. 915–926. 103. X. Delorme, A. Dolgui, M.Y. Kovalyov. Combinatorial design of a minimum cost transfer line, Omega–The International Journal of Management Science, vol. 40, n°1, 2012, p. 31–41. 104. M.-A. Louly, A. Dolgui, A. Al-Ahmari. Optimal MRP offsetting for assembly systems with stochastic lead times: POQ policy and service level constraint, Journal of Intelligent Manufacturing, vol. 23, n° 6, 2012, p. 2485–2495. 105. M.-A. Louly, A. Dolgui. A note on analytic calculation of planned lead times for assembly systems under POQ policy and service level constraint, International Journal of Production Economics, vol. 140, n° 2, 2012, p. 778–781. 106. A. Dolgui, V. Gordon, V. Strusevich. Single machine scheduling with precedence constraints and positionally dependent processing times, Computers and Operations Research, vol. 39, n° 6, 2012, p. 1218–1224. 107. A. Dolgui, M.Y. Kovalyov, K. Shchamialiova. Multi-Product Lot-Sizing and Sequencing on a Single Imperfect Machine, Computational Optimization and Applications, vol. 50, n° 3, 2011, p. 465-482. 108. O. Guschinskaya, E. Gurevsky, A. Dolgui, A. Eremeev. Metaheuristic approaches for the design of machining lines, International Journal of Advanced Manufacturing Technology, vol. 55, n°1, 2011, p. 11–22. 109. Y. Orlovich, A. Dolgui, G. Finke, V. Gordon, F. Werner. The complexity of dissociation set problems in graphs, Discrete Applied Mathematics, vol. 159, n° 13, 2011, p. 1352-1366. 110. Y. Orlovich, J. Blazewicz, A. Dolgui, G. Finke, V. Gordon. On the complexity of the independent set problem in triangle graphs, Discrete Mathematics, vol. 311, n° 16, 2011, p. 1670-1680. 111. M.-A. Louly, A. Dolgui. Optimal time phasing and periodicity for MRP with POQ policy, International Journal of Production Economics, vol. 131, n°1, 2011, p. 76–86. 112. M. Essafi, X. Delorme, A. Dolgui. Balancing lines with CNC machines: a multi-start Ant based heuristic, CIRP Journal of Manufacturing Science and Technology, vol. 2, 2010, p. 176–182. 113. V.S. Gordon, A. Dolgui. Scheduling theory problems with given partial order, Automation and Remote Control, vol. 71, n°10, 2010, p. 2029–2037. 114. M. Essafi, X. Delorme, A. Dolgui. Balancing machining lines: a two-phase heuristic, Studies in Informatics and Control, vol. 19, n° 3, 2010, p. 243-252. 115. F. Hnaien, A. Dolgui and M.-A. Louly. Key Performance Indicators for Supply Planning of Multilevel Serial Systems with Stochastic Lead Times, Control and Cybernetics, vol. 39, n° 1, 2010, p. 133–148. 116. A. Dolgui, J.-M. Proth. Pricing Strategies and Models, Annual Reviews in Control, vol. 34, n° 1, 2010, p. 101– 110. 117. A. Dolgui, A. Eremeev, M. Kovalyov, P. Kuznetsov. Multi-Product Lot-Sizing and Scheduling on Unrelated Parallel Machines, IIE Transactions, vol. 42, n° 7, 2010, p. 514–524. 118. F. Hnaien, X. Delorme, and A. Dolgui. Multi-objective optimization for inventory control in two-level assembly systems under uncertainty of lead times, Computers and Operations Research, vol. 37, n° 11, 2010, p. 1835–1843. 119. M. Essafi, X. Delorme, A. Dolgui, and O. Guschinskaya. A MIP Approach for Balancing Transfer Lines with Complex Industrial Constraints, Computers and Industrial Engineering, vol. 58, n° 3, 2010, p. 393–400. 120. O. Guschinskaya, A. Dolgui. Equilibrage de lignes de production : état de l’art, Journal Européen des Systèmes Automatisés, vol. 44, n°9-10, 2010, p. 1081–1119. (in French) 121. A. Dolgui, D. Ofitserov. Some heuristics for makespan minimization in permutation flow-shop, Management and Production Engineering Review, vol. 1, n° 4, 2010, p. 19–25. 122. A. Dolgui, M. Pashkevich. Forecasting Demand for Slow-Moving Items in Case of Reporting Errors, Risk and Decision Analysis, vol. 1, n° 4, 2009, p. 221–230. - 7 - 123. O. Guschinskaya, A. Dolgui. Comparison of Exact and Heuristic Methods for a Transfer Line Balancing Problem, International Journal of Production Economics, vol. 120, n° 2, 2009, p. 276–286. 124. S.S. Chauhan, A. Dolgui, and J.-M. Proth. A Continuous Model for Supply Planning of Assembly Systems with Stochastic Component Procurement Times, International Journal of Production Economics, vol. 120, n° 2, 2009, p. 411–417. 125. O. Guschinskaya, A. Dolgui. Configuration des lignes d'usinage à boîtiers multibroches : une approche mixte, RAIRO Operations Research, vol. 43, 2009, p. 277–296. (In French) 126. F. Hnaien, X. Delorme, and A. Dolgui. Genetic Algorithm for Supply Planning in Two-Level Assembly Systems with Random Lead Times, Engineering Applications of Artificial Intelligence, vol. 22, 2009, p. 906– 915. 127. A. Dolgui and A. Pashkevich. Manipulator Motion Planning for High-speed Robotic Laser Cutting, International Journal of Production Research, vol. 47, n° 20, 2009, p. 5691–5715. 128. A. Dolgui, N. Guschinsky, and G. Levin. A Design of DSS for Mass Production Machining Systems, The Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 57, n° 3, 2009, p. 265–271. 129. A. Dolgui and I. Ihnatsenka. Branch and Bound Algorithm for a Transfer Line Design Problem: Stations with Sequentially Activated Multi-spindle Heads, European Journal of Operational Research, vol. 197, n° 3, 2009, p. 1119–1132. 130. M.-A. Ould Louly, A. Dolgui. Calculating Safety Stocks for Assembly Systems with Random Component Procurement Lead Times: Branch and Bound Algorithm. European Journal of Operational Research, vol. 199, n° 3, 2009, p. 723–731. 131. L. Capacho, R. Pastor, A. Dolgui, O. Gushinskaya. An Evaluation of Constructive Heuristic Methods for Solving the Alternative Subgraphs Assembly Line Balancing Problem, Journal of Heuristics, vol. 15, 2009, p. 109–132. 132. A. Dolgui, N. Guschinsky, G. Levin. Graph approach for optimal design of transfer machine with rotary table, International Journal of Production Research, vol. 47, n° 2, 2009, p. 321–341. 133. A. Bratcu, A. Dolgui. Some new results on the analysis and simulation of bucket brigades (self-balancing production lines), International Journal of Production Research, vol. 47, n° 2, 2009, p. 369–388. 134. O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. Minimizing makespan for multi-spindle head machines with a mobile table, Computers and Operations Research, vol. 36, n° 2, 2009, p. 344–357. 135. A. Dolgui and I. Ihnatsenka. Balancing modular transfer lines with serial-parallel activation of spindle heads at stations, Discrete Applied Mathematics, vol. 157, n° 1, 2009, p. 68–89. 136. P. Borisovsky, A. Dolgui, A. Eremeev. Genetic Algorithms for a Supply Management Problem: MIP- Recombination vs Greedy Decoder, European Journal of Operational Research, vol. 195, n° 3, 2009, p. 770– 779. 137. M.-A. Ould Louly, A. Dolgui, and F. Hnaien. Supply planning for single-level assembly system with stochastic component delivery times and service level constraint, International Journal of Production Economics, vol. 115, n° 1, 2008, p. 236–247. 138. M.-A. Ould Louly, A. Dolgui, and F. Hnaien. Optimal Supply Planning in MRP Environments for Assembly Systems with Random Component Procurement Times, International Journal of Production Research, vol. 46, n° 19, 2008, p. 5441 –5467. 139. F. Hnaien, A. Dolgui, and M.-A. Ould Louly. Planned Lead Time Optimization in MRP Environment for Multilevel Production Systems, Journal of Systems Science and Systems Engineering, 2008, vol. 17, n° 2, p. 132–155. 140. A. Dolgui, M. Pashkevich. Extended Beta-Binomial Model for Demand Forecasting of Multiple Slow-Moving Items, International Journal of Systems Science, 2008, vol. 39, n° 7, p. 713–726. 141. A. Dolgui, M. Pashkevich. Demand Forecasting For Multiple Slow-Moving Items With Short Requests History and Unequal Demand Variance, International Journal of Production Economics, 2008, vol. 112, n° 2, p. 885–894. 142. A. Dolgui, N. Guschinsky, G. Levin. Exact and Heuristic Algorithms for Balancing Transfer Lines when a Set of Available Spindle Heads is Given, International Transactions in Operational Research, 2008, vol. 15, n° 3, p. 339–357. - 8 - 143. A. Dolgui, N. Guschinsky, G. Levin, J.-M. Proth. Optimisation of multi-position machines and transfer lines, European Journal of Operational Research, 2008, vol. 185, n°3, p. 1375–1389. 144. L. Makdessian, F. Yalaoui, and A. Dolgui. Optimisation de lignes de production : cas monocritère, Journal of Decision Systems, vol. 17, n° 3, 2008, p. 313–336. (in French) 145. A. Dolgui, M. Pashkevich, A. Pashkevich, F. Grimaud. Forecasting risk analysis for supply chains with intermittent demand. IJRAM- International Journal of Risk Assessment and Management, 2008, vol. 9, n° 3, p. 213–224. 146. L. Makdessian, F. Yalaoui and A. Dolgui. Optimisation de lignes de production : une approche multicritère, Journal of Decision Systems, vol. 17, n° 3, 2008, p. 337–368. (in French) 147. O. Guschinskaya, A. Dolgui. A Transfer Line Balancing Problem by Heuristic Methods: Industrial Case Studies, Decision Making in Manufacturing and Services, vol. 2, n° 1-2, 2008, p. 33–46. 148. O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. A Heuristic Multi-Start Decomposition Approach for Optimal Design of Serial Machining Lines, European Journal of Operational Research, 2008, vol. 189, n° 3, p. 902–913. 149. B. Finel, A. Dolgui, F. Vernadat. A Random Search and Backtracking Procedure for Transfer Line Balancing, International Journal of Computer Integrated Manufacturing, vol. 21, n° 4, 2008 , p. 376–387. 150. A. Dolgui, M. Pashkevich. On the performance of binomial and beta-binomial models of demand forecasting for multiple slow-moving inventory items, Computers and Operations Research, 2008, vol. 35, n° 3, p. 893– 905. 151. M. Lamiri, X. Xie, A. Dolgui, F. Grimaud. A stochastic model for operating room planning with elective and emergency demand for surgery, European Journal of Operational Research, 2008, vol. 185, n° 3, p. 1026– 1037. 152. A. Dolgui, C. Prodhon. Supply planning under uncertainties in MRP environments: a state of the art, Annual Reviews in Control, 2007, vol. 31, p. 269–279. 153. A. Dolgui, N. Guschinsky, G. Levin. Optimization of Power Transmission Systems Using a Multi-Level Decomposition Approach, RAIRO Operations Research, vol. 41, 2007, p. 213–229. 154. A. Dolgui, A.V. Eremeev, V.S. Sigaev. HBBA: Hybrid Algorithm for Buffer Allocation in Tandem Production Lines, Journal of Intelligent Manufacturing, vol. 18, n° 3, 2007, 411–420. 155. V.M. Demidenko, A. Dolgui. Effectively solvable cases of the quadratic assignment problem with generally monotonous and incomplete matrices, Cybernetics and Systems Analysis, vol. 43, n° 1, 2007, p. 112-125. 156. F. Hnaien, A. Dolgui, H. Marian, M.-A. Louly. Planning order release dates for multilevel linear supply chain with random lead times, Systems Science, 2007, vol. 31, n° 1, p. 19–25. 157. S. Belmokhtar, A. Dolgui, I. Ignatenko, X. Delorme. Optimizing modular machining line design problem with mixed activation mode of machining units, Decision Making in Manufacturing and Services, 2007, vol. 1, n° 1-2, p. 35–48. 158. A. I. Bratcu, A. Dolgui. Une généralisation du Modèle Normatif des lignes auto-équilibrées (« bucket brigades »), Journal Européen des Systèmes Automatisés, vol. 41, n° 3-4, 2007, p. 287–309. (in French) 159. A. Dolgui, B. Finel, O. Guschinskaya, N. Guschinsky, G. Levin, F. Vernadat. Balancing large-scale machining lines with multi-spindle heads using decomposition, International Journal of Production Research, 2006, vol. 44, n° 18-19, p. 4105–4120. 160. S. Belmokhtar, A. Dolgui, N. Guschinsky, G. Levin. An integer programming model for logical layout design of modular machining lines, Computers and Industrial Engineering, 2006, vol. 51, n° 3, p. 502–518. 161. A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. MIP Approach to Balancing Transfer Lines with Blocks of Parallel Operations, IIE Transactions, 2006, vol. 38, p. 869–882. 162. A. Dolgui, A. Pashkevich. Cluster-level operations planning for the out-of-position robotic arc-welding. International Journal of Production Research, 2006, vol. 44, n° 4, p. 675–702. 163. A. Dolgui, N. Guschinsky, G. Levin. A Special Case of Transfer Lines Balancing by Graph Approach, European Journal of Operational Research, 2006, vol. 168, n° 3, p. 732–746. 164. Y. Sotskov, A. Dolgui, M.C. Portmann. Stability Analysis of Optimal Balance for Assembly Line with Fixed Cycle Time. European Journal of Operational Research, 2006, vol. 168, n° 3, p. 783–797. - 9 - 165. A. Dolgui, N. Guschinsky, G. Levin. A Decomposition Method for Transfer Line Life Cycle Cost Optimization. Journal of Mathematical Modeling and Algorithms, 2006, vol. 5, n° 2, p. 215–238. 166. O. Zaikin, A. Dolgui, E. Kushtina, P. Korytkowski. Optimization of capacity in an intangible production, Control Sciences, 2005, n° 6, p. 22–27. 167. A. Dolgui, O. Guschinskaya, N.Guschinsky, G. Levin. Conception de systèmes de fabrication: prototype d’un logiciel d’aide à la décision. Journal of Decision Systems, 2005, vol. 14, n° 4, p. 489–516. (in French) 168. A. Dolgui, G. Levin, M.A. Louly. Decomposition approach for a problem of lot-sizing and sequencing under uncertainties, International Journal of Computer Integrated Manufacturing, vol. 18, n° 5, 2005, p. 376–385. 169. A. Bratcu, A. Dolgui. A Survey of the Self-Balancing Production Lines (“Bucket Brigades”). Journal of Intelligent Manufacturing, vol. 16, n° 2, 2005, p. 139–158. 170. A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. A heuristic approach for transfer lines balancing. Journal of Intelligent Manufacturing, vol. 16, n° 2, 2005, p. 159–171. 171. A. Pashkevich, A. Dolgui, O. Chumakov. Multiobjective optimization of robot motion for laser cutting application. International Journal of Computer Integrated Manufacturing, 2004, vol. 17, n° 2, p. 171–183. 172. M.-A. Ould Louly, A. Dolgui. The MPS Parametrization under Lead Time Uncertainty. International Journal of Production Economics, n°90, 2004, p. 369–376. 173. M.-A. Louly, A. Dolgui. Une méthode arborescente pour la planification des réapprovisionnements. Journal Européen des Systèmes Automatisés, vol. 38, n° 7-8, 2004, p. 809–825. (in French) 174. A. Dolgui, O. Zaikin, E. Kushtina, P. Koritkowski. Modelling and optimization of the processing nodes performance in computer aided control systems of distributed production of printer matter. Automation and Remote Control, 2003, vol. 64, n° 9, p. 1501–1506. 175. A. Pashkevich, A. Dolgui, K. Semkin. Kinematics aspects of a robot positioned in an arc wending application. Control Engineering Practice, 2003, vol. 11/6, p. 633 –647. 176. A. Dolgui, V. Sysoev. Une heuristique d'optimisation globale basée sur la psi- transformation. RAIRO Operations Research, 2003, vol. 37, p. 119–141. 177. B. Rekiek, A. Dolgui, A. Delchambre, A. Bratcu. State of art of assembly lines design optimization. Annual Reviews in Control, 2002, vol.26, n° 2, p. 163–174. 178. M.-A. Ould Louly, A. Dolgui. Generalized newsboy model to compute the optimal planned lead times in assembly systems. International Journal of Production Research, 2002, vol. 40, n° 17, p. 4401–4414. 179. A. Dolgui, M.-A. Ould Louly. A Model for Supply Planning under Lead Time Uncertainty. International Journal of Production Economics, n° 78, 2002, p. 145–152. 180. M.-A. Ould Louly, A. Dolgui. Supply chain management under uncertainties. International Journal of Agile Manufacturing, 2002, vol. 5, n° 1, p. 17–26. 181. A. Dolgui, A. Eremeev, A. Kolokolov, V. Sigaev. Buffer Allocation in Production Line with Unreliable Machines. Journal of Mathematical Modeling and Algorithms, n° 2, 2002, p. 89–104. 182. A. Dolgui. Performance Analysis Model for Systems Described by Renewal Process. Engineering Simulation (Electronic Modeling), vol. 24, n° 2, 2002, p. 3–11. 183. A. Dolgui, N. Guschinsky, Y. Harrath, G. Levin. Une approche de programmation linéaire pour la conception des lignes de transfert. Journal Européen des Systèmes Automatisés, vol. 36, n° 1, 2002, p. 11–33. (In French) 184. Y. Sotskov, A. Dolgui, F. Werner. Unit-time Job-shop Scheduling via Mixed Graph Coloring. International Journal of Mathematical Algorithms, 2001, vol. 2, n° 4, p. 289–325. 185. A. Dolgui. On a Model of Joint Control of Reserves in Automatic Control Systems of Production. Automation and Remote Control, 2001, vol. 62, n° 12, p. 2020–2026. 186. A. Dolgui, D. Ofitserov. A Stochastic Method for Discrete and Continuous Optimization in Manufacturing Systems. Journal of Intelligent Manufacturing, vol. 8, n°5, 1997, p. 405–413. 187. A. Dolgui, M.C. Portmann, J.M. Proth. Planification de systèmes d’assemblage avec approvisionnement aléatoire en composants. Journal of Decision Systems, vol. 4, n° 4, 1995, p. 255–279. (In French) 188. V. Balaguin, A. Dolgui, D. Ofitserov, M. Revotuk, V. Starych, A. Smirnov. Computer Simulation of Flexible Manufacturing Systems. at –Automatisierungstechnik , 1988, n°1, p. 8–12. (In German) - 10 -