Table Of Content

Oracle® Fusion Middleware [1] Administering Oracle Data Integrator 12c (12.2.1.1) E69032-01 May 2016 This guide describes how to perform configuration tasks and define security in Oracle Data Integrator. Oracle Fusion Middleware Administering Oracle Data Integrator, 12c (12.2.1.1) E69032-01 Copyright © 2010, 2016, Oracle and/or its affiliates. All rights reserved. Primary Authors: Laura Hofman Miquel, Joshua Stanley, Pratima Chennupati Contributing Author: Alex Kotopoulis Contributors: David Allan, Linda Bittarelli, Sophia Chen, Hiroyuki Chiku, Boobalan Chinnasamy, Victor Chow, Sowmya Dhandapani, Daniel Gallagher, Ayush Ganeriwal, Kevin Hwang, Archana Jagadish, Aslam Khan, Sebu T. Koleth, Ale Paez, Veenavani Revanuru, Nisha Sahadevan, Julien Testut, Sachin Thatte, Jose Thomas, Gary Tripp, Vikas Varma, Robert Velisar, Winnie Wan, Geoff Watters, Jennifer Waywell This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle. Contents Preface................................................................................................................................................................. xi Audience....................................................................................................................................................... xi Documentation Accessibility..................................................................................................................... xi Related Documents..................................................................................................................................... xi Conventions................................................................................................................................................ xii What's New In Oracle Data Integrator?......................................................................................... xiii New and Changed Features for Release 12c (12.2.1.1)......................................................................... xiii New and Changed Features for Release 12c (12.2.1)............................................................................ xiv New and Changed Features for Release 12c (12.1.3.0.1) ..................................................................... xvi New and Changed Features for Release 12c (12.1.3)........................................................................... xvii New and Changed Features for Release 12c (12.1.2)............................................................................ xix 1 Introduction to Oracle Data Integrator 1.1 What is Oracle Data Integrator?............................................................................................... 1-1 1.2 Oracle Data Integrator Components........................................................................................ 1-1 1.3 Basic Tasks for Configuring and Managing Oracle Data Integrator................................... 1-2 Part I Administering Oracle Data Integrator Architecture 2 Administering Repositories 2.1 Introduction to Oracle Data Integrator Repositories............................................................. 2-1 2.2 Creating Repository Storage Spaces......................................................................................... 2-2 2.3 Creating the Master Repository................................................................................................ 2-5 2.4 Connecting to the Master Repository...................................................................................... 2-7 2.5 Creating a Work Repository...................................................................................................... 2-7 2.6 Connecting to a Work Repository............................................................................................ 2-8 2.7 Changing a Work Repository Password................................................................................. 2-9 2.8 Advanced Actions for Administering Repositories .............................................................. 2-9 2.8.1 Attaching and Detaching (Deleting) a Work Repository............................................... 2-9 2.8.2 Erasing a Work Repository.............................................................................................. 2-10 2.8.3 Configuring Repository Connections............................................................................ 2-11 iii 3 Setting Up a Topology 3.1 Setting Up the Topology............................................................................................................ 3-1 3.1.1 Creating a Context............................................................................................................... 3-2 3.1.2 Creating a Data Server........................................................................................................ 3-2 3.1.2.1 Pre-requisites and Guidelines..................................................................................... 3-2 3.1.2.2 Creating a Data Server................................................................................................. 3-3 3.1.2.3 Creating a Data Server (Advanced Settings)............................................................ 3-5 3.1.2.4 Testing a Data Server Connection.............................................................................. 3-8 3.1.3 Creating a Physical Schema............................................................................................... 3-9 3.1.4 Creating a Logical Schema.............................................................................................. 3-10 3.1.5 Creating a Physical Agent............................................................................................... 3-10 3.1.6 Creating a Logical Agent................................................................................................. 3-11 3.2 Working with Big Data........................................................................................................... 3-11 3.3 Managing Agents..................................................................................................................... 3-12 3.3.1 Standalone Agent.............................................................................................................. 3-12 3.3.1.1 Configuring a Standalone Agent ............................................................................ 3-12 3.3.1.2 Launching a Standalone Agent............................................................................... 3-13 3.3.1.3 Stopping an Agent..................................................................................................... 3-13 3.3.2 Standalone Colocated Agent........................................................................................... 3-13 3.3.2.1 Configuring a Standalone Colocated Agent.......................................................... 3-13 3.3.2.2 Launching a Standalone Colocated Agent............................................................. 3-13 3.3.2.3 Stopping an Agent..................................................................................................... 3-13 3.3.3 Java EE Agent.................................................................................................................... 3-13 3.3.3.1 Deploying an Agent in a Java EE Application Server.......................................... 3-14 3.3.3.2 Creating a Server Template for a Java EE Agent.................................................. 3-14 3.3.3.3 Deploying Datasources from Oracle Data Integrator in an application server for an Agent 3-18 3.3.4 Load Balancing Agents.................................................................................................... 3-19 3.3.4.1 Delegating Sessions................................................................................................... 3-19 3.3.4.2 Agent Unavailable..................................................................................................... 3-19 3.3.4.3 Setting Up Load Balancing....................................................................................... 3-19 4 High Availability for Oracle Data Integrator 4.1 Oracle Data Integrator Single Instance Characteristics......................................................... 4-1 4.1.1 Oracle Data Integrator Sessions Lifecycle and Recovery............................................... 4-2 4.1.1.1 Sessions Interruption................................................................................................... 4-2 4.1.1.2 Recovering Sessions..................................................................................................... 4-3 4.1.2 Agent Startup and Shutdown Cycle................................................................................. 4-3 4.1.3 Oracle Data Integrator External Dependencies............................................................... 4-4 4.1.4 Oracle Data Integrator Startup and Shutdown Process................................................. 4-4 4.1.5 Oracle Data Integrator Configuration Artifacts.............................................................. 4-5 4.1.5.1 Agent Configuration.................................................................................................... 4-5 4.1.5.2 Oracle Data Integrator Console Configuration........................................................ 4-5 4.1.5.3 Oracle Data Integrator Log Locations and Configuration...................................... 4-5 4.1.5.3.1 Oracle Data Integrator Session Logs.................................................................. 4-5 4.1.5.3.2 Java EE Agent Log Files....................................................................................... 4-5 4.1.5.3.3 Standalone and Standalone Colocated Agent Log Files.................................. 4-6 iv 4.1.5.3.4 Oracle Data Integrator Console Log Files.......................................................... 4-6 4.2 Oracle Data Integrator High Availability and Failover Considerations............................. 4-6 4.2.1 Oracle Data Integrator Clustered Deployment............................................................... 4-6 4.2.2 Oracle Data Integrator Protection from Failure and Expected Behavior.................... 4-8 4.2.2.1 WebLogic Server or Standalone Agent Crash.......................................................... 4-8 4.2.2.2 Repository Database Failure....................................................................................... 4-8 4.2.2.3 Scheduler Node Failure............................................................................................... 4-9 4.3 Roadmap for Setting Up a High Availability Topology....................................................... 4-9 4.3.1 Reconfigure Agents.......................................................................................................... 4-10 Part II Creating and Using Data Services 5 Setting Up Data Services 5.1 Setting Up Data Services............................................................................................................ 5-1 5.1.1 Configuring the Web Services Container......................................................................... 5-1 5.1.2 Setting up the Data Sources............................................................................................... 5-2 5.1.3 Configuring the Model....................................................................................................... 5-3 6 Generating and Deploying Data Services 6.1 Generating and Deploying Data Services............................................................................... 6-1 6.2 Overview of Generated Services............................................................................................... 6-2 6.3 Testing Data Services.................................................................................................................. 6-3 Part III Running and Monitoring Integration Processes 7 Running Integration Processes 7.1 Understanding ODI Executions................................................................................................ 7-1 7.2 Executing Mappings, Procedures, Packages and Model Operations.................................. 7-3 7.3 Executing a Scenario................................................................................................................... 7-3 7.3.1 Executing a Scenario from ODI Studio............................................................................. 7-4 7.3.2 Executing a Scenario from a Command Line.................................................................. 7-4 7.4 Restarting a Session.................................................................................................................... 7-7 7.4.1 Restarting a Session from ODI Studio.............................................................................. 7-8 7.4.2 Restarting a Session from a Command Line.................................................................... 7-8 7.5 Stopping a Session...................................................................................................................... 7-9 7.5.1 Stopping a Session From ODI Studio............................................................................ 7-10 7.5.2 Stopping a Session From a Command Line.................................................................. 7-10 7.6 Executing a Load Plan............................................................................................................. 7-11 7.6.1 Executing a Load Plan from ODI Studio....................................................................... 7-11 7.6.2 Executing a Load Plan from a Command Line............................................................ 7-12 7.7 Restarting a Load Plan Run.................................................................................................... 7-14 7.7.1 Restarting a Load Plan from ODI Studio...................................................................... 7-15 7.7.2 Restarting a Load Plan from a Command Line............................................................ 7-15 7.8 Stopping a Load Plan Run...................................................................................................... 7-16 7.8.1 Stopping a Load Plan from ODI Studio........................................................................ 7-17 v 7.8.2 Stopping a Load Plan Run from a Command Line..................................................... 7-17 7.9 Scheduling Scenarios and Load Plans.................................................................................. 7-18 7.9.1 Scheduling a Scenario or a Load Plan with the Built-in Scheduler........................... 7-18 7.9.1.1 Scheduling a Scenario or a Load Plan.................................................................... 7-19 7.9.1.2 Updating an Agent's Schedule................................................................................ 7-20 7.9.1.3 Displaying the Schedule........................................................................................... 7-20 7.9.2 Scheduling a Scenario or a Load Plan with an External Scheduler........................... 7-21 7.10 Simulating an Execution......................................................................................................... 7-22 7.11 Managing Executions Using Web Services.......................................................................... 7-22 7.11.1 Introduction to Run-Time Web Services....................................................................... 7-23 7.11.2 Executing a Scenario Using a Web Service................................................................... 7-23 7.11.3 Monitoring a Session Status Using a Web Service....................................................... 7-24 7.11.4 Restarting a Session Using a Web Service..................................................................... 7-24 7.11.5 Executing a Load Plan Using a Web Service................................................................ 7-25 7.11.6 Stopping a Load Plan Run Using a Web Service......................................................... 7-26 7.11.7 Restarting a Load Plan Instance Using a Web Service................................................ 7-27 7.11.8 Monitoring a Load Plan Run Status Using a Web Service......................................... 7-27 7.11.9 Accessing the Web Service from a Command Line..................................................... 7-28 7.11.10 Using the Run-Time Web Services with External Authentication............................ 7-30 7.11.11 Using WS-Addressing...................................................................................................... 7-31 7.11.12 Using Asynchronous Web Services with Callback..................................................... 7-32 8 Debugging Integration Processes 8.1 About Sessions and Blueprints................................................................................................. 8-1 8.1.1 Blueprint Source and Target Code.................................................................................... 8-1 8.2 Introduction to Debugging in the Session Editor................................................................... 8-2 8.2.1 Icons....................................................................................................................................... 8-2 8.2.2 Differences between Debugging Packages, Mappings, and Procedures..................... 8-3 8.3 Starting a Debugging Session.................................................................................................... 8-3 8.3.1 Connecting to a Running Debugging Session................................................................. 8-4 8.3.1.1 Built-in Agents and External Agents......................................................................... 8-4 8.3.1.2 Debug Session Lifecycle.............................................................................................. 8-5 8.3.2 Debug Session Options....................................................................................................... 8-5 8.3.2.1 Suspend Before the First Task..................................................................................... 8-5 8.3.2.2 Associate to Current Client......................................................................................... 8-5 8.3.2.3 Delay Before Connect................................................................................................... 8-5 8.3.2.4 Debug Descendant Sessions........................................................................................ 8-5 8.3.2.5 Break On Error.............................................................................................................. 8-5 8.4 Stepping through a Blueprint in the Session Editor.............................................................. 8-6 8.4.1 Steps and Tasks.................................................................................................................... 8-6 8.5 Using the Debugging Cursor.................................................................................................... 8-6 8.5.1 Debug Actions...................................................................................................................... 8-6 8.5.1.1 Step Into......................................................................................................................... 8-6 8.5.1.2 Pause............................................................................................................................... 8-7 8.5.1.3 Resume........................................................................................................................... 8-7 8.5.1.4 Run to Task End............................................................................................................ 8-7 8.5.1.5 Run to Next Task.......................................................................................................... 8-7 vi 8.5.1.6 Run to Step End............................................................................................................ 8-7 8.5.1.7 Run to Next Step........................................................................................................... 8-7 8.5.2 Multiple Cursors.................................................................................................................. 8-7 8.5.2.1 Special Behavior............................................................................................................ 8-7 8.5.3 Using Breakpoints............................................................................................................... 8-7 8.5.3.1 About the Debug Breakpoints Window.................................................................... 8-7 8.5.3.2 About Design vs. Runtime Breakpoints.................................................................... 8-7 8.5.3.3 Placing Breakpoints...................................................................................................... 8-8 8.5.3.4 Editing Breakpoints...................................................................................................... 8-8 8.5.3.5 Removing Breakpoints................................................................................................. 8-8 8.5.3.6 Enabling and Disabling Breakpoints......................................................................... 8-9 8.5.3.7 Pass Count..................................................................................................................... 8-9 8.5.4 Debugging Data................................................................................................................... 8-9 8.5.4.1 Get Data......................................................................................................................... 8-9 8.5.4.1.1 Source Task Data................................................................................................... 8-9 8.5.4.1.2 Target Task Data.................................................................................................... 8-9 8.5.4.2 Run SQL Code............................................................................................................ 8-10 8.5.4.2.1 Editing SQL Code............................................................................................... 8-10 8.5.5 Debugging Variables........................................................................................................ 8-10 8.5.5.1 Modifying Variables.................................................................................................. 8-10 8.5.6 Debugging Threads.......................................................................................................... 8-10 8.5.6.1 Go To Source.............................................................................................................. 8-10 8.6 Managing Debugging Sessions.............................................................................................. 8-10 8.6.1 Stop Normal and Stop Immediate.................................................................................. 8-11 8.6.2 Restart Execution.............................................................................................................. 8-11 9 Monitoring Integration Processes 9.1 Introduction to Monitoring....................................................................................................... 9-1 9.1.1 Introduction to Operator Navigator................................................................................. 9-1 9.1.2 Scenarios................................................................................................................................ 9-2 9.1.3 Sessions................................................................................................................................. 9-2 9.1.4 Load Plans............................................................................................................................. 9-3 9.1.5 Load Plan Executions.......................................................................................................... 9-3 9.1.6 Schedules............................................................................................................................... 9-4 9.1.7 Log......................................................................................................................................... 9-4 9.1.8 Status..................................................................................................................................... 9-4 9.1.9 Task Types............................................................................................................................ 9-5 9.2 Monitoring Executions Results................................................................................................. 9-5 9.2.1 Monitoring Sessions............................................................................................................ 9-5 9.2.2 Monitoring Load Plan Runs............................................................................................... 9-5 9.2.3 Handling Failed Sessions.................................................................................................... 9-6 9.2.4 Reviewing Successful Sessions.......................................................................................... 9-7 9.2.5 Handling Failed Load Plans............................................................................................... 9-8 9.2.6 Reviewing Successful Load Plans..................................................................................... 9-8 9.3 Managing your Executions........................................................................................................ 9-8 9.3.1 Managing Sessions.............................................................................................................. 9-8 9.3.1.1 Cleaning Stale Sessions................................................................................................ 9-9 vii 9.3.1.2 Removing Temporary Objects.................................................................................... 9-9 9.3.2 Managing Load Plan Executions.................................................................................... 9-10 9.3.3 Managing the Log ............................................................................................................ 9-10 9.3.3.1 Filtering Sessions....................................................................................................... 9-10 9.3.3.2 Purging the Log......................................................................................................... 9-11 9.3.3.3 Organizing the Log with Session Folders.............................................................. 9-12 9.3.3.4 Exporting and Importing Log Data........................................................................ 9-13 9.3.3.5 Runtime Logging for ODI components.................................................................. 9-15 9.3.4 Managing Scenarios and Load Plans............................................................................. 9-17 9.3.4.1 Load Plan and Scenario Folders.............................................................................. 9-17 9.3.4.2 Importing Load Plans, Scenarios, and Solutions in Production......................... 9-17 9.3.5 Managing Schedules........................................................................................................ 9-17 10 Using Oracle Data Integrator Console 10.1 Introduction to Oracle Data Integrator Console.................................................................. 10-1 10.1.1 Oracle Data Integrator Console Concepts..................................................................... 10-1 10.1.2 Oracle Data Integrator Console Interface...................................................................... 10-2 10.2 Using Oracle Data Integrator Console.................................................................................. 10-3 10.2.1 Connecting to Oracle Data Integrator Console............................................................ 10-3 10.2.2 Generic User Operations.................................................................................................. 10-4 10.2.3 Managing Scenarios and Sessions.................................................................................. 10-5 10.2.4 Managing Load Plans....................................................................................................... 10-8 10.2.5 Purging the Log............................................................................................................... 10-10 10.2.6 Using Data Lineage and Flow Map............................................................................. 10-11 10.2.7 Performing Administrative Operations...................................................................... 10-13 10.3 ODI Domain............................................................................................................................ 10-15 10.4 Oracle Enterprise Manager Fusion Middleware Control................................................ 10-15 10.4.1 Configuring Oracle Fusion Middleware Control with ODI Plug-in....................... 10-16 10.4.2 Configuring Oracle Data Integrator Console............................................................. 10-17 10.4.3 Managing Oracle Data Integrator................................................................................ 10-17 10.4.4 Configuring ODI Standalone Agents........................................................................... 10-18 10.4.5 Configuring Master Repository.................................................................................... 10-18 10.4.6 Searching Sessions.......................................................................................................... 10-18 10.4.7 Searching Load Plan Executions................................................................................... 10-18 10.5 Management Pack for Oracle Data Integrator................................................................... 10-18 Part IV Managing Security Settings 11 Managing Security in Oracle Data Integrator 11.1 Introduction to Oracle Data Integrator Security................................................................. 11-1 11.1.1 Objects, Instances, and Methods.................................................................................... 11-2 11.1.2 Profiles................................................................................................................................ 11-2 11.1.3 Users................................................................................................................................... 11-4 11.1.4 Roles.................................................................................................................................... 11-4 11.2 User Management.................................................................................................................... 11-5 11.2.1 Security Policy Approaches............................................................................................ 11-5 viii 11.2.2 Managing Profiles............................................................................................................. 11-6 11.2.2.1 Creating a New Profile............................................................................................. 11-6 11.2.2.2 Duplicating a Profile................................................................................................. 11-6 11.2.2.3 Deleting a Profile....................................................................................................... 11-6 11.2.3 Managing Users................................................................................................................ 11-6 11.2.3.1 Creating a New User in the Internal Repository.................................................. 11-7 11.2.3.2 Assigning a Profile to a User.................................................................................... 11-7 11.2.3.3 Removing a Profile from a User.............................................................................. 11-8 11.2.3.4 Deleting a User from the Internal Repository....................................................... 11-8 11.2.3.5 Viewing User Connection Information.................................................................. 11-8 11.2.4 Managing Privileges......................................................................................................... 11-9 11.2.4.1 Granting a Profile Method or User Method.......................................................... 11-9 11.2.4.2 Revoking a Profile Method or User Method......................................................... 11-9 11.2.4.3 Granting an Authorization by Object Instance..................................................... 11-9 11.2.4.4 Revoking an Authorization by Object Instance.................................................. 11-10 11.2.4.5 Cleaning up Unused Authorizations.................................................................... 11-10 11.3 Advanced Encryption Standard.......................................................................................... 11-11 11.4 Using a Password-Protected Wallet for Storing Login Credentials............................... 11-11 11.4.1 Creating the Password-Protected Wallet.................................................................... 11-12 11.4.2 Permitting Repository Access to Other Users............................................................ 11-13 11.4.3 Changing the Wallet Password.................................................................................... 11-14 11.4.4 Customizing How Login Credentials Are Saved....................................................... 11-14 11.5 Setting Up External Password Storage............................................................................... 11-15 11.5.1 Setting the Password Storage........................................................................................ 11-16 11.5.2 Switching the Password Storage.................................................................................. 11-16 11.5.3 Recovering the Password Storage................................................................................ 11-17 11.6 Managing the Authentication Mode................................................................................... 11-17 11.6.1 Setting the Authentication Mode in the Master Repository..................................... 11-18 11.7 Configuring External Authentication................................................................................. 11-18 11.7.1 Configuring Oracle Data Integrator Studio for External Authentication............... 11-19 11.7.1.1 Set Up the OPSS Configuration File..................................................................... 11-19 11.7.1.2 Create a Wallet File for an LDAP Bootstrap User............................................... 11-21 11.7.1.3 Set External Authentication when Creating the Master Repository................ 11-21 11.7.2 Switching an Existing Master Repository to External Authentication Mode........ 11-22 11.7.3 Reactivating Users After Switching to External Authentication............................. 11-26 11.7.4 Configuring Standalone or Standalone Colocated Agents for External Authentication.. 11-27 11.7.5 Mapping Principals Defined in an Identity Store to Oracle Data Integrator Roles........... 11-28 11.7.5.1 How Enterprise Role Integration Works.............................................................. 11-28 11.7.5.2 Defining and Managing Oracle Data Integrator Roles...................................... 11-29 11.7.5.3 Using the Roles Editor............................................................................................ 11-31 11.7.5.3.1 Start the Roles Editor....................................................................................... 11-31 11.7.5.3.2 Create a Role in Oracle Data Integrator........................................................ 11-32 11.7.5.3.3 Map Enterprise Principals to Oracle Data Integrator Roles....................... 11-33 11.7.5.3.4 Assign Privileges or Profiles to Oracle Data Integrator Roles................... 11-33 11.7.5.3.5 Delete Oracle Data Integrator Roles.............................................................. 11-34 ix 11.8 Configuring OWSM Policies for JRF-ODI Asynchronous Web Services with Callback.......... 11-34 11.9 Enforcing Password Policies................................................................................................ 11-35 11.10 Configuring Standalone or Standalone Colocated Agents to Use a Secure Transport 11-35 11.10.1 Creating an SSL Certificate............................................................................................ 11-36 11.10.2 Configuring SSL for Standalone Agents or Standalone Colocated Agents........... 11-37 11.10.3 Configuring ODI Studio to Connect with an SSL-enabled Agent........................... 11-37 11.10.4 Configuring Oracle Data Integrator Client Tools to Communicate with an SSL-enabled Agent 11-38 11.10.5 Encoding a Password..................................................................................................... 11-38 11.10.6 Disabling Weak Cipher Suites for an SSL-enabled Standalone Agent or Standalone Colocated Agent 11-38 11.11 Configuring Oracle Data Integrator with a Web Proxy Server....................................... 11-39 11.12 Configuring Single Sign-On (SSO) for Oracle Data Integrator Console and Enterprise Manager using Oracle Access Manager 11g 11-39 11.13 Best Security Practices for Oracle Data Integrator............................................................ 11-41 x

Description:
Basic Tasks for Configuring and Managing Oracle Data Integrator.. 1-2 CRAM-MD5: Authenticated access, encrypted MD5. □.
ebook img

Oracle Fusion Middleware Administering Oracle Data Integrator PDF

210 Pages·2016·1.45 MB·English
by  Oracle Corporation
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Oracle Fusion Middleware Administering Oracle Data Integrator

Oracle® Fusion Middleware [1] Administering Oracle Data Integrator 12c (12.2.1.1) E69032-01 May 2016 This guide describes how to perform configuration tasks and define security in Oracle Data Integrator. Oracle Fusion Middleware Administering Oracle Data Integrator, 12c (12.2.1.1) E69032-01 Copyright © 2010, 2016, Oracle and/or its affiliates. All rights reserved. Primary Authors: Laura Hofman Miquel, Joshua Stanley, Pratima Chennupati Contributing Author: Alex Kotopoulis Contributors: David Allan, Linda Bittarelli, Sophia Chen, Hiroyuki Chiku, Boobalan Chinnasamy, Victor Chow, Sowmya Dhandapani, Daniel Gallagher, Ayush Ganeriwal, Kevin Hwang, Archana Jagadish, Aslam Khan, Sebu T. Koleth, Ale Paez, Veenavani Revanuru, Nisha Sahadevan, Julien Testut, Sachin Thatte, Jose Thomas, Gary Tripp, Vikas Varma, Robert Velisar, Winnie Wan, Geoff Watters, Jennifer Waywell This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle. Contents Preface................................................................................................................................................................. xi Audience....................................................................................................................................................... xi Documentation Accessibility..................................................................................................................... xi Related Documents..................................................................................................................................... xi Conventions................................................................................................................................................ xii What's New In Oracle Data Integrator?......................................................................................... xiii New and Changed Features for Release 12c (12.2.1.1)......................................................................... xiii New and Changed Features for Release 12c (12.2.1)............................................................................ xiv New and Changed Features for Release 12c (12.1.3.0.1) ..................................................................... xvi New and Changed Features for Release 12c (12.1.3)........................................................................... xvii New and Changed Features for Release 12c (12.1.2)............................................................................ xix 1 Introduction to Oracle Data Integrator 1.1 What is Oracle Data Integrator?............................................................................................... 1-1 1.2 Oracle Data Integrator Components........................................................................................ 1-1 1.3 Basic Tasks for Configuring and Managing Oracle Data Integrator................................... 1-2 Part I Administering Oracle Data Integrator Architecture 2 Administering Repositories 2.1 Introduction to Oracle Data Integrator Repositories............................................................. 2-1 2.2 Creating Repository Storage Spaces......................................................................................... 2-2 2.3 Creating the Master Repository................................................................................................ 2-5 2.4 Connecting to the Master Repository...................................................................................... 2-7 2.5 Creating a Work Repository...................................................................................................... 2-7 2.6 Connecting to a Work Repository............................................................................................ 2-8 2.7 Changing a Work Repository Password................................................................................. 2-9 2.8 Advanced Actions for Administering Repositories .............................................................. 2-9 2.8.1 Attaching and Detaching (Deleting) a Work Repository............................................... 2-9 2.8.2 Erasing a Work Repository.............................................................................................. 2-10 2.8.3 Configuring Repository Connections............................................................................ 2-11 iii 3 Setting Up a Topology 3.1 Setting Up the Topology............................................................................................................ 3-1 3.1.1 Creating a Context............................................................................................................... 3-2 3.1.2 Creating a Data Server........................................................................................................ 3-2 3.1.2.1 Pre-requisites and Guidelines..................................................................................... 3-2 3.1.2.2 Creating a Data Server................................................................................................. 3-3 3.1.2.3 Creating a Data Server (Advanced Settings)............................................................ 3-5 3.1.2.4 Testing a Data Server Connection.............................................................................. 3-8 3.1.3 Creating a Physical Schema............................................................................................... 3-9 3.1.4 Creating a Logical Schema.............................................................................................. 3-10 3.1.5 Creating a Physical Agent............................................................................................... 3-10 3.1.6 Creating a Logical Agent................................................................................................. 3-11 3.2 Working with Big Data........................................................................................................... 3-11 3.3 Managing Agents..................................................................................................................... 3-12 3.3.1 Standalone Agent.............................................................................................................. 3-12 3.3.1.1 Configuring a Standalone Agent ............................................................................ 3-12 3.3.1.2 Launching a Standalone Agent............................................................................... 3-13 3.3.1.3 Stopping an Agent..................................................................................................... 3-13 3.3.2 Standalone Colocated Agent........................................................................................... 3-13 3.3.2.1 Configuring a Standalone Colocated Agent.......................................................... 3-13 3.3.2.2 Launching a Standalone Colocated Agent............................................................. 3-13 3.3.2.3 Stopping an Agent..................................................................................................... 3-13 3.3.3 Java EE Agent.................................................................................................................... 3-13 3.3.3.1 Deploying an Agent in a Java EE Application Server.......................................... 3-14 3.3.3.2 Creating a Server Template for a Java EE Agent.................................................. 3-14 3.3.3.3 Deploying Datasources from Oracle Data Integrator in an application server for an Agent 3-18 3.3.4 Load Balancing Agents.................................................................................................... 3-19 3.3.4.1 Delegating Sessions................................................................................................... 3-19 3.3.4.2 Agent Unavailable..................................................................................................... 3-19 3.3.4.3 Setting Up Load Balancing....................................................................................... 3-19 4 High Availability for Oracle Data Integrator 4.1 Oracle Data Integrator Single Instance Characteristics......................................................... 4-1 4.1.1 Oracle Data Integrator Sessions Lifecycle and Recovery............................................... 4-2 4.1.1.1 Sessions Interruption................................................................................................... 4-2 4.1.1.2 Recovering Sessions..................................................................................................... 4-3 4.1.2 Agent Startup and Shutdown Cycle................................................................................. 4-3 4.1.3 Oracle Data Integrator External Dependencies............................................................... 4-4 4.1.4 Oracle Data Integrator Startup and Shutdown Process................................................. 4-4 4.1.5 Oracle Data Integrator Configuration Artifacts.............................................................. 4-5 4.1.5.1 Agent Configuration.................................................................................................... 4-5 4.1.5.2 Oracle Data Integrator Console Configuration........................................................ 4-5 4.1.5.3 Oracle Data Integrator Log Locations and Configuration...................................... 4-5 4.1.5.3.1 Oracle Data Integrator Session Logs.................................................................. 4-5 4.1.5.3.2 Java EE Agent Log Files....................................................................................... 4-5 4.1.5.3.3 Standalone and Standalone Colocated Agent Log Files.................................. 4-6 iv 4.1.5.3.4 Oracle Data Integrator Console Log Files.......................................................... 4-6 4.2 Oracle Data Integrator High Availability and Failover Considerations............................. 4-6 4.2.1 Oracle Data Integrator Clustered Deployment............................................................... 4-6 4.2.2 Oracle Data Integrator Protection from Failure and Expected Behavior.................... 4-8 4.2.2.1 WebLogic Server or Standalone Agent Crash.......................................................... 4-8 4.2.2.2 Repository Database Failure....................................................................................... 4-8 4.2.2.3 Scheduler Node Failure............................................................................................... 4-9 4.3 Roadmap for Setting Up a High Availability Topology....................................................... 4-9 4.3.1 Reconfigure Agents.......................................................................................................... 4-10 Part II Creating and Using Data Services 5 Setting Up Data Services 5.1 Setting Up Data Services............................................................................................................ 5-1 5.1.1 Configuring the Web Services Container......................................................................... 5-1 5.1.2 Setting up the Data Sources............................................................................................... 5-2 5.1.3 Configuring the Model....................................................................................................... 5-3 6 Generating and Deploying Data Services 6.1 Generating and Deploying Data Services............................................................................... 6-1 6.2 Overview of Generated Services............................................................................................... 6-2 6.3 Testing Data Services.................................................................................................................. 6-3 Part III Running and Monitoring Integration Processes 7 Running Integration Processes 7.1 Understanding ODI Executions................................................................................................ 7-1 7.2 Executing Mappings, Procedures, Packages and Model Operations.................................. 7-3 7.3 Executing a Scenario................................................................................................................... 7-3 7.3.1 Executing a Scenario from ODI Studio............................................................................. 7-4 7.3.2 Executing a Scenario from a Command Line.................................................................. 7-4 7.4 Restarting a Session.................................................................................................................... 7-7 7.4.1 Restarting a Session from ODI Studio.............................................................................. 7-8 7.4.2 Restarting a Session from a Command Line.................................................................... 7-8 7.5 Stopping a Session...................................................................................................................... 7-9 7.5.1 Stopping a Session From ODI Studio............................................................................ 7-10 7.5.2 Stopping a Session From a Command Line.................................................................. 7-10 7.6 Executing a Load Plan............................................................................................................. 7-11 7.6.1 Executing a Load Plan from ODI Studio....................................................................... 7-11 7.6.2 Executing a Load Plan from a Command Line............................................................ 7-12 7.7 Restarting a Load Plan Run.................................................................................................... 7-14 7.7.1 Restarting a Load Plan from ODI Studio...................................................................... 7-15 7.7.2 Restarting a Load Plan from a Command Line............................................................ 7-15 7.8 Stopping a Load Plan Run...................................................................................................... 7-16 7.8.1 Stopping a Load Plan from ODI Studio........................................................................ 7-17 v 7.8.2 Stopping a Load Plan Run from a Command Line..................................................... 7-17 7.9 Scheduling Scenarios and Load Plans.................................................................................. 7-18 7.9.1 Scheduling a Scenario or a Load Plan with the Built-in Scheduler........................... 7-18 7.9.1.1 Scheduling a Scenario or a Load Plan.................................................................... 7-19 7.9.1.2 Updating an Agent's Schedule................................................................................ 7-20 7.9.1.3 Displaying the Schedule........................................................................................... 7-20 7.9.2 Scheduling a Scenario or a Load Plan with an External Scheduler........................... 7-21 7.10 Simulating an Execution......................................................................................................... 7-22 7.11 Managing Executions Using Web Services.......................................................................... 7-22 7.11.1 Introduction to Run-Time Web Services....................................................................... 7-23 7.11.2 Executing a Scenario Using a Web Service................................................................... 7-23 7.11.3 Monitoring a Session Status Using a Web Service....................................................... 7-24 7.11.4 Restarting a Session Using a Web Service..................................................................... 7-24 7.11.5 Executing a Load Plan Using a Web Service................................................................ 7-25 7.11.6 Stopping a Load Plan Run Using a Web Service......................................................... 7-26 7.11.7 Restarting a Load Plan Instance Using a Web Service................................................ 7-27 7.11.8 Monitoring a Load Plan Run Status Using a Web Service......................................... 7-27 7.11.9 Accessing the Web Service from a Command Line..................................................... 7-28 7.11.10 Using the Run-Time Web Services with External Authentication............................ 7-30 7.11.11 Using WS-Addressing...................................................................................................... 7-31 7.11.12 Using Asynchronous Web Services with Callback..................................................... 7-32 8 Debugging Integration Processes 8.1 About Sessions and Blueprints................................................................................................. 8-1 8.1.1 Blueprint Source and Target Code.................................................................................... 8-1 8.2 Introduction to Debugging in the Session Editor................................................................... 8-2 8.2.1 Icons....................................................................................................................................... 8-2 8.2.2 Differences between Debugging Packages, Mappings, and Procedures..................... 8-3 8.3 Starting a Debugging Session.................................................................................................... 8-3 8.3.1 Connecting to a Running Debugging Session................................................................. 8-4 8.3.1.1 Built-in Agents and External Agents......................................................................... 8-4 8.3.1.2 Debug Session Lifecycle.............................................................................................. 8-5 8.3.2 Debug Session Options....................................................................................................... 8-5 8.3.2.1 Suspend Before the First Task..................................................................................... 8-5 8.3.2.2 Associate to Current Client......................................................................................... 8-5 8.3.2.3 Delay Before Connect................................................................................................... 8-5 8.3.2.4 Debug Descendant Sessions........................................................................................ 8-5 8.3.2.5 Break On Error.............................................................................................................. 8-5 8.4 Stepping through a Blueprint in the Session Editor.............................................................. 8-6 8.4.1 Steps and Tasks.................................................................................................................... 8-6 8.5 Using the Debugging Cursor.................................................................................................... 8-6 8.5.1 Debug Actions...................................................................................................................... 8-6 8.5.1.1 Step Into......................................................................................................................... 8-6 8.5.1.2 Pause............................................................................................................................... 8-7 8.5.1.3 Resume........................................................................................................................... 8-7 8.5.1.4 Run to Task End............................................................................................................ 8-7 8.5.1.5 Run to Next Task.......................................................................................................... 8-7 vi 8.5.1.6 Run to Step End............................................................................................................ 8-7 8.5.1.7 Run to Next Step........................................................................................................... 8-7 8.5.2 Multiple Cursors.................................................................................................................. 8-7 8.5.2.1 Special Behavior............................................................................................................ 8-7 8.5.3 Using Breakpoints............................................................................................................... 8-7 8.5.3.1 About the Debug Breakpoints Window.................................................................... 8-7 8.5.3.2 About Design vs. Runtime Breakpoints.................................................................... 8-7 8.5.3.3 Placing Breakpoints...................................................................................................... 8-8 8.5.3.4 Editing Breakpoints...................................................................................................... 8-8 8.5.3.5 Removing Breakpoints................................................................................................. 8-8 8.5.3.6 Enabling and Disabling Breakpoints......................................................................... 8-9 8.5.3.7 Pass Count..................................................................................................................... 8-9 8.5.4 Debugging Data................................................................................................................... 8-9 8.5.4.1 Get Data......................................................................................................................... 8-9 8.5.4.1.1 Source Task Data................................................................................................... 8-9 8.5.4.1.2 Target Task Data.................................................................................................... 8-9 8.5.4.2 Run SQL Code............................................................................................................ 8-10 8.5.4.2.1 Editing SQL Code............................................................................................... 8-10 8.5.5 Debugging Variables........................................................................................................ 8-10 8.5.5.1 Modifying Variables.................................................................................................. 8-10 8.5.6 Debugging Threads.......................................................................................................... 8-10 8.5.6.1 Go To Source.............................................................................................................. 8-10 8.6 Managing Debugging Sessions.............................................................................................. 8-10 8.6.1 Stop Normal and Stop Immediate.................................................................................. 8-11 8.6.2 Restart Execution.............................................................................................................. 8-11 9 Monitoring Integration Processes 9.1 Introduction to Monitoring....................................................................................................... 9-1 9.1.1 Introduction to Operator Navigator................................................................................. 9-1 9.1.2 Scenarios................................................................................................................................ 9-2 9.1.3 Sessions................................................................................................................................. 9-2 9.1.4 Load Plans............................................................................................................................. 9-3 9.1.5 Load Plan Executions.......................................................................................................... 9-3 9.1.6 Schedules............................................................................................................................... 9-4 9.1.7 Log......................................................................................................................................... 9-4 9.1.8 Status..................................................................................................................................... 9-4 9.1.9 Task Types............................................................................................................................ 9-5 9.2 Monitoring Executions Results................................................................................................. 9-5 9.2.1 Monitoring Sessions............................................................................................................ 9-5 9.2.2 Monitoring Load Plan Runs............................................................................................... 9-5 9.2.3 Handling Failed Sessions.................................................................................................... 9-6 9.2.4 Reviewing Successful Sessions.......................................................................................... 9-7 9.2.5 Handling Failed Load Plans............................................................................................... 9-8 9.2.6 Reviewing Successful Load Plans..................................................................................... 9-8 9.3 Managing your Executions........................................................................................................ 9-8 9.3.1 Managing Sessions.............................................................................................................. 9-8 9.3.1.1 Cleaning Stale Sessions................................................................................................ 9-9 vii 9.3.1.2 Removing Temporary Objects.................................................................................... 9-9 9.3.2 Managing Load Plan Executions.................................................................................... 9-10 9.3.3 Managing the Log ............................................................................................................ 9-10 9.3.3.1 Filtering Sessions....................................................................................................... 9-10 9.3.3.2 Purging the Log......................................................................................................... 9-11 9.3.3.3 Organizing the Log with Session Folders.............................................................. 9-12 9.3.3.4 Exporting and Importing Log Data........................................................................ 9-13 9.3.3.5 Runtime Logging for ODI components.................................................................. 9-15 9.3.4 Managing Scenarios and Load Plans............................................................................. 9-17 9.3.4.1 Load Plan and Scenario Folders.............................................................................. 9-17 9.3.4.2 Importing Load Plans, Scenarios, and Solutions in Production......................... 9-17 9.3.5 Managing Schedules........................................................................................................ 9-17 10 Using Oracle Data Integrator Console 10.1 Introduction to Oracle Data Integrator Console.................................................................. 10-1 10.1.1 Oracle Data Integrator Console Concepts..................................................................... 10-1 10.1.2 Oracle Data Integrator Console Interface...................................................................... 10-2 10.2 Using Oracle Data Integrator Console.................................................................................. 10-3 10.2.1 Connecting to Oracle Data Integrator Console............................................................ 10-3 10.2.2 Generic User Operations.................................................................................................. 10-4 10.2.3 Managing Scenarios and Sessions.................................................................................. 10-5 10.2.4 Managing Load Plans....................................................................................................... 10-8 10.2.5 Purging the Log............................................................................................................... 10-10 10.2.6 Using Data Lineage and Flow Map............................................................................. 10-11 10.2.7 Performing Administrative Operations...................................................................... 10-13 10.3 ODI Domain............................................................................................................................ 10-15 10.4 Oracle Enterprise Manager Fusion Middleware Control................................................ 10-15 10.4.1 Configuring Oracle Fusion Middleware Control with ODI Plug-in....................... 10-16 10.4.2 Configuring Oracle Data Integrator Console............................................................. 10-17 10.4.3 Managing Oracle Data Integrator................................................................................ 10-17 10.4.4 Configuring ODI Standalone Agents........................................................................... 10-18 10.4.5 Configuring Master Repository.................................................................................... 10-18 10.4.6 Searching Sessions.......................................................................................................... 10-18 10.4.7 Searching Load Plan Executions................................................................................... 10-18 10.5 Management Pack for Oracle Data Integrator................................................................... 10-18 Part IV Managing Security Settings 11 Managing Security in Oracle Data Integrator 11.1 Introduction to Oracle Data Integrator Security................................................................. 11-1 11.1.1 Objects, Instances, and Methods.................................................................................... 11-2 11.1.2 Profiles................................................................................................................................ 11-2 11.1.3 Users................................................................................................................................... 11-4 11.1.4 Roles.................................................................................................................................... 11-4 11.2 User Management.................................................................................................................... 11-5 11.2.1 Security Policy Approaches............................................................................................ 11-5 viii 11.2.2 Managing Profiles............................................................................................................. 11-6 11.2.2.1 Creating a New Profile............................................................................................. 11-6 11.2.2.2 Duplicating a Profile................................................................................................. 11-6 11.2.2.3 Deleting a Profile....................................................................................................... 11-6 11.2.3 Managing Users................................................................................................................ 11-6 11.2.3.1 Creating a New User in the Internal Repository.................................................. 11-7 11.2.3.2 Assigning a Profile to a User.................................................................................... 11-7 11.2.3.3 Removing a Profile from a User.............................................................................. 11-8 11.2.3.4 Deleting a User from the Internal Repository....................................................... 11-8 11.2.3.5 Viewing User Connection Information.................................................................. 11-8 11.2.4 Managing Privileges......................................................................................................... 11-9 11.2.4.1 Granting a Profile Method or User Method.......................................................... 11-9 11.2.4.2 Revoking a Profile Method or User Method......................................................... 11-9 11.2.4.3 Granting an Authorization by Object Instance..................................................... 11-9 11.2.4.4 Revoking an Authorization by Object Instance.................................................. 11-10 11.2.4.5 Cleaning up Unused Authorizations.................................................................... 11-10 11.3 Advanced Encryption Standard.......................................................................................... 11-11 11.4 Using a Password-Protected Wallet for Storing Login Credentials............................... 11-11 11.4.1 Creating the Password-Protected Wallet.................................................................... 11-12 11.4.2 Permitting Repository Access to Other Users............................................................ 11-13 11.4.3 Changing the Wallet Password.................................................................................... 11-14 11.4.4 Customizing How Login Credentials Are Saved....................................................... 11-14 11.5 Setting Up External Password Storage............................................................................... 11-15 11.5.1 Setting the Password Storage........................................................................................ 11-16 11.5.2 Switching the Password Storage.................................................................................. 11-16 11.5.3 Recovering the Password Storage................................................................................ 11-17 11.6 Managing the Authentication Mode................................................................................... 11-17 11.6.1 Setting the Authentication Mode in the Master Repository..................................... 11-18 11.7 Configuring External Authentication................................................................................. 11-18 11.7.1 Configuring Oracle Data Integrator Studio for External Authentication............... 11-19 11.7.1.1 Set Up the OPSS Configuration File..................................................................... 11-19 11.7.1.2 Create a Wallet File for an LDAP Bootstrap User............................................... 11-21 11.7.1.3 Set External Authentication when Creating the Master Repository................ 11-21 11.7.2 Switching an Existing Master Repository to External Authentication Mode........ 11-22 11.7.3 Reactivating Users After Switching to External Authentication............................. 11-26 11.7.4 Configuring Standalone or Standalone Colocated Agents for External Authentication.. 11-27 11.7.5 Mapping Principals Defined in an Identity Store to Oracle Data Integrator Roles........... 11-28 11.7.5.1 How Enterprise Role Integration Works.............................................................. 11-28 11.7.5.2 Defining and Managing Oracle Data Integrator Roles...................................... 11-29 11.7.5.3 Using the Roles Editor............................................................................................ 11-31 11.7.5.3.1 Start the Roles Editor....................................................................................... 11-31 11.7.5.3.2 Create a Role in Oracle Data Integrator........................................................ 11-32 11.7.5.3.3 Map Enterprise Principals to Oracle Data Integrator Roles....................... 11-33 11.7.5.3.4 Assign Privileges or Profiles to Oracle Data Integrator Roles................... 11-33 11.7.5.3.5 Delete Oracle Data Integrator Roles.............................................................. 11-34 ix 11.8 Configuring OWSM Policies for JRF-ODI Asynchronous Web Services with Callback.......... 11-34 11.9 Enforcing Password Policies................................................................................................ 11-35 11.10 Configuring Standalone or Standalone Colocated Agents to Use a Secure Transport 11-35 11.10.1 Creating an SSL Certificate............................................................................................ 11-36 11.10.2 Configuring SSL for Standalone Agents or Standalone Colocated Agents........... 11-37 11.10.3 Configuring ODI Studio to Connect with an SSL-enabled Agent........................... 11-37 11.10.4 Configuring Oracle Data Integrator Client Tools to Communicate with an SSL-enabled Agent 11-38 11.10.5 Encoding a Password..................................................................................................... 11-38 11.10.6 Disabling Weak Cipher Suites for an SSL-enabled Standalone Agent or Standalone Colocated Agent 11-38 11.11 Configuring Oracle Data Integrator with a Web Proxy Server....................................... 11-39 11.12 Configuring Single Sign-On (SSO) for Oracle Data Integrator Console and Enterprise Manager using Oracle Access Manager 11g 11-39 11.13 Best Security Practices for Oracle Data Integrator............................................................ 11-41 x

Description:
Basic Tasks for Configuring and Managing Oracle Data Integrator.. 1-2 CRAM-MD5: Authenticated access, encrypted MD5. □.
See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users