Materials Science and Engineering, A171 (1993) 285 Author Index of Volume 171 Akhmadeev, N. A., 143 Hong, S.1., 181 Ocansey, P., 231 Alyoshin, G., 163 Hwang, J.R., 213 Orekhov, N., 163 Andrieu, E., 191 Pelletier, J. M., 263 Jeng, S. M., 65 Perng, C. C., 213 Bartels, A., 127 Jo, H. H., 151 Poirier, D. R., 231 Beckerman, C., 199 Bhadeshia, H. K. D., 223 Kassam, Z. H. A., 55 Razumovskii, I., 163 Kaysser, W. A., 271 Rios, P. R., 175 Castillo-Gomez, J. R., 35 Chawla, K. K., 249 Sallamand, P., 263 Lai, M. O., 13, 21, 257 Choi, S. R., 77 Sastry, S. M. L., 95 Lee, J.-L., 223 Chokshi, A. H., 47 Sharma, S. C., 169 Lewis, C. A., 1 Soboyejo, W. O., 95 Li, B., 105 Doong, J. L., 213 Li, X., 249 Stobbs, W. M., 1 Lim, L. C., 13, 21 Tikare, V., 77 Ebrahimi, F., 35 Little, E. A., 241 Ellyin, F., 105 Lu, L., 257 Valiev, R. Z., 143 Es-Souni, M., 127 Vecchio, K.S., 181 Faulkner, R. G., 241 Ma, J., 13 Volkmann, T., 169 Fujikawa, S.1., 151 Madsen, A., 191 Miao, B., 13, 21 Wagner, R., 127 Ghonem, H., 191 Mikhailov, S. B., 143 Waite, N. C., 241 Gibeling, J.C., 115 Mishin, Y., 163 Wang, C. Y., 199 Gotman, I., 271 Mogilevsky, P., 271 Wang, Z., 55, 85 Gray, III, G. T., 181 Morgan, T. S., 241 Withers, P. J., 1 Groza, J.R., 115 Mukherjee, A. K., 47 Xu, Z. R., 249 Gutmanas, E. Y., 271 Mulyukov, R. R., 143 Yang, J. M., 65 Herlach, D. M., 169 Noat, P., 163 Zhang, J., 85, 257 Hoelzer, D. T., 35 Northwood, D. O., 13, 21 Elsevier Sequoia Materials Science and Engineering, A171 (1993) 287-289 Subject Index of Volume 171 Aging Austenite microstructural changes during aging of a near-a titanium quasi-stoichiometric coarsening of f.c.c. carbides in micro- alloy, 191 alloyed austenite containing niobium and vanadium, 175 Air crack initiation and fatigue lives in air and vacuum environ- Bauschinger effect ments, 105 Bauschinger effect in a modified Zr-2.5wt.%Nb pressure tube Alloys material, 55 a unified solute diffusion model for columnar and equiaxed Boron dendritic alloy solidification, 199 microstructure. and thermal stability of coatings obtained by creep deformation and creep microstructures of a near y-TiAl interaction of SiC and B,C with Cr and Ti powders, 271 alloy Ti-48AI-2Cr, 127 Cu-based shape memory powder preparation using the mechanical alloying technique, 257 Carbides internal stress induced debonding in a zirconia-reinforced quasi-stoichiometric coarsening of f.c.c. carbides in micro- 6061 aluminium alloy composite, 1 alloyed austenite containing niobium and vanadium, 175 kinetics of precipitation in Al-Sc alloys and low temperature Carbon solid solubility of scandium in aluminium studied by elec- creep behavior and damage mechanisms of SiC-fiber- trical resistivity measurements, 151 reinforced titanium matrix composite, 65 laser cladding on aluminium-based alloys: microstructural microstructure and thermal stability of coatings obtained by features, 263 interaction of SiC and B,C with Cr and Ti powders, 271 microstructural changes during aging of a near-a titanium Cavitation alloy, 191 the influence of hydrostatic pressure on grain boundary model of diffusion coarsening of the raft structure in single sliding in superplasticity: implications for cavitation, 47 crystals of nickel-base superalloys, 163 Chromium quasi-stoichiometric coarsening of f.c.c. carbides in micro- creep deformation and creep microstructures of a near y-TiAl alloyed austenite containing niobium and vanadium, 175 alloy Ti-48AI-2Cr, 127 radiation-inducded grain boundary segregation in dilute Coarsening alloys, 241 model of diffusion coarsening of the raft structure in single short fatigue growth and J-R curve behavior of the particulate crystals of nickel-base superalloys, 163 Al,O,-reinforced Al(2014) alloy, 85 quasi-stoichiometric coarsening of f.c.c. carbides in micro- Alumina alloyed austenite containing niobium and vanadium, 175 crack healing of alumina with a residual glassy phase: strength, Composites fracture toughness and fatigue, 77 high strain rate tensile properties of an (AI,O, particles)-(Al effect of high temperature exposure on the tensile strength of alloy 6061-T6) metal matrix composite, 213 alumina fiber Nextel 610, 249 internal stress induced debonding in a zirconia-reinforced Aluminium 6061 aluminium alloy composite, 1 creep deformation and creep microstructures of a near y-TiAl quenching and thermal cycling effects in a 1060-Al alloy Ti-48AI-2Cr, 127 matrix—10vol.%AI,O, particulate reinforced metal matrix fracture toughness of 0 +x microstructures in the Nb-Ti-Al composite, 181 system, 35 Copper high strain rate tensile properties of an (AI,O; particles)-(Al Cu-based shape memory powder preparation using the alloy 6061-T6) metal matrix composite, 213 mechanical alloying technique, 257 internal stress induced debonding in a zirconia-reinforced principles of particle selection for dispersion-strengthened 6061 aluminium alloy composite, 1 copper, 115 kinetics of precipitation in Al-Sc alloys and low temperature strain amplitude dependence of internal friction and strength solid solubility of scandium in aluminium studied by elec- of submicrometre-grained copper, 143 trical resistivity measurements, 151 Cracking laser cladding on aluminium-base alloys: microstructural crack healing of alumina with a residual glassy phase: strength, features, 263 fracture toughness and fatigue, 77 microstructural development in _ drop-tube-solidified crack initiation and fatigue lives in air and vacuum environ- Al-3.6wt.%Fe droplets: an analysis, 169 ments, 105 quenching and thermal cycling effects in a 1060-Al Creep matrix—10vol.%AlI,O, particulate reinforced metal matrix creep behavior and damage mechanisms of SiC-fiber- composite, 181 reinforced titanium matrix composite, 65 short fatigue growth and J-R curve behavior of the particulate creep deformation and creep microstructures of a near y-TiAl AlL,O,-reinforced Al(2014) alloy, 85 alloy Ti-48AI-2Cr, 127 Elsevier Sequoia 288 Crystals Grain boundary sliding model of diffusion coarsening of the raft structure in single the influence of hydrostatic pressure on grain boundary crystals of nickel-base superalloys, 163 sliding in superplasticity: implications for cavitation, 47 Damage High temperature exposure creep behavior and damage mechanisms of SiC-fiber- effect of high temperature exposure on the tensile strength of reinforced titanium matrix composite, 65 alumina fiber Nextel 610, 249 Debonding Hydrostatic pressure internal stress induced debonding in a zirconia-reinforced the influence of hydrostatic pressure on grain boundary 6061 aluminium alloy composite, 1 sliding in superplasticity: implications for cavitation, 47 Deformation creep deformation and creep microstructures of a near y-TiAl Intermetallics alloy Ti-48AI-2Cr, 127 an investigation of the effects of ductile phase reinforcement Dendrites on the mechanical behavior of advanced high temperature a unified solute diffusion model for columnar and equiaxed intermetallics, 95 dendritic alloy solidification, 199 Iron Diffusion microstructural development in drop-tube-solidified a unified solute diffusion model for columnar and equiaxed Al-3.6wt.%Fe droplets: an analysis, 169 dendritic alloy solidification, 199 model of diffusion coarsening of the raft structure in single Laser cladding crystals of nickel-base superalloys, 163 laser cladding on aluminium-base alloys: microstructural Dispersion strengthening features, 263 principles of particle selection for dispersion-strengthened copper, 115 Mechanical alloying Drop tube solidification Cu-based shape memory powder preparation using the microstructural development in drop-tube-solidified mechanical alloying technique, 257 Al-3.6wt.%Fe droplets: an analysis, 169 Mechanical behavior Ductility an investigation of the effects of ductile phase reinforcement an investigation of the effects of ductile phase reinforcement on the mechanical behavior of advanced high temperature on the mechanical behavior of advanced high temperature intermetallics, 95 intermetallics, 95 Metal matrix composites high strain rate tensile properties of an (Al,O, particles)-(Al Electrical resistivity alloy 6061-T6) metal matrix composite, 213 kinetics of precipitation in Al-Sc alloys and low temperature quenching and thermal cycling effects in a 1060-Al solid solubility of scandium in aluminium studied by elec- matrix—10vol.%AI,O, particulate reinforced metal matrix trical resistivity measurements, 151 composite, 181 Mushy zones Fatigue permeability for flow of liquid through equiaxial mushy zones, crack healing of alumina with residual glassy phase: strength, 231 fracture toughness and fatigue, 77 crack initiation and fatigue lives in air and vacuum environ- Nextel 610 ments, 105 effect of high temperature exposure on the tensile strength of short fatigue growth and J-R curve behavior of the particulate alumina fiber Nextel 610, 249 Al,O,-reinforced Al(2014) alloy, 85 Nickel Fibre reinforcement model of diffusion coarsening of the raft structure in single creep behavior and damage mechanisms of SiC-fiber- crystals of nickel-base superalloys, 163 reinforced titanium matrix composite, 65 Niobium Fibres Bauschinger effect in a modified Zr-2.5wt.%Nb pressure tube effect of high temperature exposure on the tensile strength of material, 55 alumina fiber Nextel 610, 249 fracture toughness of 0 +x microstructures in the Nb-Ti-Al Fracture system, 35 fracture toughness of 0 + x microstructures in the Nb-Ti-Al quasi-stoichiometric coarsening of f.c.c. carbides in micro- system, 35 alloyed austenite containing niobium and vanadium, 175 Fracture toughness crack healing of alumina with a residual glassy phase: strength, Oxygen fracture toughness and fatigue, 77 high strain rate tensile properties of an (Al,O, particles)-(Al Friction ) alloy 6061-T6) metal matrix composite, 213 strain amplitude dependence of internal friction and strength quenching and thermal cycling effects in a 1060-Al of submicrometre-grained copper, 143 matrix—10vol.%AI,O; particulate reinforced metal matrix composite, 181 Glassy phase short fatigue growth and J-R curve behavior of the particulate crack healing of alumina with a residual glassy phase: strength, Al,O,-reinforced Al(2014) alloy, 85 fracture toughness and fatigue, 77 Grain boundary segregation Particle selection radiation-induced grain boundary segregation in dilute alloys, principles of particle selection for dispersion-strengthened 241 copper, 115 289 Permeability strain amplitude dependence of internal friction and strength permeability for flow of liquid through equiaxial mushy zones, of submicrometre-grained copper, 143 FY Strength Phase reinforcement crack healing of alumina with a residual glassy phase: strength, an investigation of the effects of ductile phase reinforcement fracture toughness and fatigue, 77 on the mechanical behavior of advanced high temperature Stress intermetallics, 95 internal stress induced debonding in a zirconia-reinforced Plasticity 6061 aluminium alloy composite, 1 the influence of hydrostatic pressure on grain boundary Submicrometre graining sliding in superplasticity: implications for cavitation, 47 strain amplitude dependence of internal friction and strength Powders of submicrometre-grained copper, 143 microstructure and thermal stability of coatings obtained by interaction of SiC and B,C with Cr and Ti powders, 271 Tempering Precipitation microstructure of tempered AISI 403 stainless steel, 21 kinetics of precipitation in Al-Sc alloys and low temperature tempering of AISI 403 stainless steel, 13 solid solubility of scandium in aluminium studied by elec- Tensile properties trical resistivity measurements, 151 high strain rate tensile properties of an (Al,O, particles)-(Al alloy 6061-T6) metal matrix composite, 213 Tensile strength Quenching effect of high temperature exposure on the tensile strength of quenching and thermal cycling effects in a 1060-Al matrix—10vol.%AI,O, particulate reinforced metal matrix alumina fiber Nextel 610, 249 Thermal cycling composite, 181 quenching and thermal cycling effects in a 1060-Al matrix—10vol.%Al1,O; particulate reinforced metal matrix Radiation composite, 181 radiation-induced grain boundary segregation in dilute alloys, Thermal stability 241 microstructure and thermal stability of coatings obtained by Raft structures interaction of SiC and B,C with Cr and Ti powders, 271 model of diffusion coarsening of the raft structure in single Titanium crystals of nickel-base superalloys, 163 creep behavior and damage mechanisms of SiC-fiber- reinforced titanium matrix composite, 65 Scandium creep deformation and creep microstructures of a near y-TiAl kinetics of precipitation in Al-Sc alloys and low temperature alloy Ti-48AI1-2Cr, 127 solid solubility of scandium in aluminium studied by elec- fracture toughness of o +x microstructures in the Nb-Ti-Al trical resistivity measurements, 151 system, 35 Shape memory powders microstructural changes during aging of a near-a titanium Cu-based shape memory powder preparation using the alloy, 191 mechanical alloying technique, 257 microstructure and thermal stability of coatings obtained by Silicon interaction of SiC and B,C with Cr and Ti powders, 271 creep behavior and damage mechanisms of SiC-fiber- TTT diagrams reinforced titanium matrix composite, 65 a methodology for the prediction of time-temperature- microstructure and thermal stability of coatings obtained by transformation diagrams, 223 interaction of SiC and B,C with Cr and Ti powders, 271 Solidification Vacuum a unified solute diffusion model for columnar and equiaxed crack initiation and fatigue lives in air and vacuum environ- dendritic alloy solidification, 199 ments, 105 Solubility Vanadium kinetics of precipitation in Al-Sc alloys and low temperature quasi-stoichiometric coarsening of f.c.c. carbides in micro- solid solubility of scandium in aluminium studied by elec- alloyed austenite containing niobium and vanadium, 175 trical resistivity measurements, 151 Stainless steel Zirconia microstructure of tempered AISI 403 stainless steel, 21 internal stress induced debonding in a zirconia-reinforced tempering of AISI 403 stainless steel, 13 6061 aluminium alloy composite, 1 Strain Zirconium high strain rate tensile properties of an (Al,O, particles)-(Al Bauschinger effect in a modified Zr-2.5wt.Nb pressure tube alloy 6061-T6) metal matrix composite, 213 material, 55