MATERIAL SCIENCE AND ENVIRONMENTAL ENGINEERING IICCMMSSEEEE1155..iinnddbb ii 1111//1166//22001155 33::2233::1188 AAMM PROCEEDINGS OF THE 3RD ANNUAL 2015 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENVIRONMENTAL ENGINEERING (ICMSEE2015), WUHAN, HUBEI, CHINA, 5–6 JUNE 2015 Material Science and Environmental Engineering Editor Ping Chen College of Engineering Electrical and Computer Engineering, Boise State University, Boise, ID, USA IICCMMSSEEEE1155..iinnddbb iiiiii 1111//1166//22001155 33::2233::1188 AAMM CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business © 2016 Taylor & Francis Group, London, UK Typeset by V Publishing Solutions Pvt Ltd., Chennai, India Printed and bound in Great Britain and the USA All rights reserved. No part of this publication or the information contained herein may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by photocopying, recording or otherwise, without written prior permission from the publisher. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 11320, 2301 EH Leiden, The Netherlands e-mail: [email protected] www.crcpress.com – www.taylorandfrancis.com ISBN: 978-1-138-02938-5 (Hbk) ISBN: 978-1-315-63853-9 (eBook PDF) IICCMMSSEEEE1155..iinnddbb iivv 1111//1166//22001155 33::2233::1188 AAMM Material Science and Environmental Engineering – Chen (Ed.) © 2016 Taylor & Francis Group, London, ISBN 978-1-138-02938-5 Table of contents Preface xv Metallic material Microstructure and mechanical properties of AZ61 alloy with Sm 3 H.X. Zhu, Q.A. Li, Q. Zhang & J. Chen Effect of TiC addition on microstructure and mechanical properties of Ti(C, N)-based cermets 7 G.X. Zhong, H.Z. Yu, L. Dai, Y.H. Sun & P. Feng Thermal simulation of a net-like microstructure in weld joint of high-strength steel thick plate by Double-Sided Arc Welding 11 D.Y. Li, X.D. Yi, Y.Z. Li, D.Q. Yang & G.J. Zhang Weld formation on overhead position for thick plate of high-strength low-alloy steel by Double-Sided Arc Welding 19 D.Y. Li, X.D. Yi, D.Q. Yang & G.J. Zhang Approaches for predicting the temper embrittlement tendency 25 S.H. Zhang, Y.L. Lv & Y. Tan Numerical simulating of plate cold rolling with higher mismatch of work roller velocities 31 J.B. Zhang Structure transition of Metal-Organic Framework-5 induced by copper doping 37 F.M. Tian, Y.L. Chen, X.H. Zhang & M.Y. Wang Simulation about mold polishing pattern and test research 43 Z.R. Chen, X.C. Xu, X.C. Ma & T. Wang Effect of inclusions on the corrosion resistance of low carbon steel in acid solution with high chloride concentration 47 S. Chen & G.M. Li The site preference of 4d elements in ω-Ti: The computer simulation research 53 J.Q. Niu & Z.R. Liu Research progress of laser cladding on surface of titanium alloy 57 T.G. Zhang & R.L. Sun Process control of 7075 Al alloy semi-solid slurry by thixoforming 63 S.D. Gan, G.S. Gan, H.S. Wang & G.Q. Meng Ni-Cu alloy anode material prepared with hard template method 67 H.X. You, C. Zhao, B. Qu, Y.J. Guan, J.W. Xu, G.Q. Guan & A. Abudula Texture and mechanical behavior of Mg-12Gd-3Y-0.5Zr alloy processed by ECAP 73 Y.J. Wu, X. Shen, J.W. Yang & R. Zhu Effect of Sn on thermal stability and Glass Forming Ability of Fe-based amorphous alloy 79 Q. Fu, M.X. Fu, C. Hu, C. Wang & T. Li Effect of laser processing parameters on the quality of Ni60+Ni/MoS laser clad layer 2 on titanium alloy surface 85 M. Fan & R.L. Sun v IICCMMSSEEEE1155..iinnddbb vv 1111//1166//22001155 33::2233::1188 AAMM The optimization of the fake porthole die design for aluminum extrusion process 91 C.T. Sun Comparisons of aluminum extrusion process with fake porthole die structure and ordinary die structure 95 X.M. Sun Effect on the micro-structure and properties of AM60B co-doped with rare earth 99 Y.Q. Yu, Y. Li & J.J. Yang Chemical material Research on efficient chlorine removing agents 105 T. Zhang, S.Z. Wang, C.H. Dong & L. Han Synthesis, structure characterization and magnetic property of (Mg Fe)(Al CrFe )O 1−y y 0.4 x 1.6−x 4 spinel solid solution 109 X.R. Wu, C. Chen, H.H. Lü & L.S. Li Removal of BPA through a goethite-photocatalyzed fenton-like reaction with the enhancement of oxalic acid 115 T. Li, G.S. Zhang & P. Wang Investigation on the phase stability and thermal conductivity of ScO, YO co-doped 2 3 2 3 ZrO coatings 123 2 H.F. Liu, X. Xiong, Y.L. Wang & X. Chen Investigation of the effectiveness of a chemical dispersant under different mixing conditions 129 J. Sun, C.C. Zhao, Z.J. Xie & G.B. Xu Absorption of NO into aqueous coal slurry with added FeII(EDTA) in the presence of SO 133 2 W.S. Sun, J.Y. Chen, J.M. Zhou & F. Pan Overview and analysis of partial-nitrification control technology and its application 139 R.M. Liu, J.C. Chen & L.H. Zang Solvent extraction of iron (III) from acid chloride solutions by Trioctylamine and Decanol 145 X.H. Mao Preparation of porous bismuth oxide by sol-gel method using citric acid 151 Z.S. Jiang & Y.J. Wang Synthesis of spherical SrCO powders by hydrothermal method 155 3 S.X. Wang & X.W. Zou The adsorption performance of sodium nitrate for vermiculite, perlite and ceramsite 159 R.G. Li, J.Q. Zhu, W.B. Zhou, X.M. Cheng & Y.Y. Li Performance of Flame Retardant Hexakis (4-Aminophenoxy) Cyclotriphazene on wool fabrics lingling 163 L.L. Liu, W. Wang & D. Yu The application of eco-friendly formaldehyde-free fixing agent on cotton fabric 167 X.P. Pei, J.X. He, J.L. Yao & X. Dong Different morphologies SBA-15 for extraction of uranium ion from aqueous solution 173 C.B. Xiong, Y. Wang, L. She, C.Y. Liu & Y. Ding Synthesis and characterization of meso-microporous materials Beta-SBA-15 177 X.L. Wang, B. Ren, P. Du, M.H. Zhang, S.T. Song, A.J. Duan, C.M. Xu & Z. Zhao Production of Rubberized Bitumen by oxidation of black oil 183 Y. Tileuberdi, Y.K. Ongarbayev, Y.I. Imanbayev, M.I. Tulepov, Z.A. Mansurov & B.K. Tuleutaev Composite material Progressive failure simulation of composite snowboard bolted joints based on the energy damage evolution 189 R.K. Zhang vi IICCMMSSEEEE1155..iinnddbb vvii 1111//1166//22001155 33::2233::1188 AAMM The preparation and electrical properties of CB/UHMWPE composites 193 H.J. Wang & H.L. Hu Preparation and performance of ceramifying EPDM rubber composite 197 Y. Pei, Y. Qin, X. Zhang & Z.X. Huang Visible light-driven floatable photocatalyst of B–N–TiO/EP composites 201 2 X. Wang, J.Y. Huang, J. Zhang, X.J. Wang & J.F. Zhao Adsorption behavior of ACF/CNT composites for Cr (VI) from aqueous solution 207 L.P. Wang, M.Y. Zhang, Q.Z. Huang, Z.C. Huang & X.P. Long Metal organic framework-derived ZnO/C composite for photocatalytic oxidative degradation 215 Y.R. Guo, W. Chang & W. Zhang Study on the microstructure and properties of PTFE particles/Ni-based alloy composite coatings 219 Y.X. Shang & X.M. Zhang Effect of Ope-POSS on glass transition temperature of PU hybrid composites 225 R. Pan, L.L. Wang & Y. Liu Synthesis and structural characterization of a new Ca (II) complex with 2-Formyl-benzenesulfonate-thiosemicarbazide ligand 229 H. Zou Construction material and technology Experimental study on mechanical behavior of concretes with sea sand and sea water 235 L. Xing Research on civil construction technology in architectural engineering 241 F.F. Yang Coal mining on the analysis of the impact of building damage 245 C.L. Huang Post-earthquake dynamic stability reanalysis of Shapai arch dam abutment 249 H.Y. Zeng, J.H. Zhang, X.K. Liu, Z.Z. Wang, W.G. Zhao & R.K. Wang Constructing healthy building’s outside environment base on CPTED theories 259 K.Q. Wang & J.Y. Wang Technical feasibility study of unfired brick with coal gangue at the Wulanmulun site, Inner Mongolia, China 263 Z.B. Yu, H.T. Peng, Y.D. Zhu, J. Li, Q. Zhao, M.H. You & X.P. Zhang Life cycle assessment of the concrete prepared by pulverized fly ash 267 C. Song & H. Shi Influence of subway tunnel lining concrete after sodium nitrate corrosion by strength curve 273 C.Z. Sun, J.K. Zhang & T.T. Sang Degradation model and security analysis of hangers of suspension bridge 277 J.H. Li & J.Z. Wang Research on the dam deformation forecast model based on material properties 283 F.M. Lu & T.Y. Jiang Research on the slaking deformation of earth-rock dam based on the Duncan-Chang’s Eb Model 287 X.C. Jiang & Y.Q. Li Measurement and analysis of the performance of the main ventilators of east one shaft in the Yaoqiao coal mine 291 G.Y. Cheng, J. Cao, S. Feng, Y. Cheng & H. Wang vii IICCMMSSEEEE1155..iinnddbb vviiii 1111//1166//22001155 33::2233::1199 AAMM Temperature crack control of the linear accelerator mass concrete 297 G.C. Yan & Z.X. Ma Nanomaterial and nanotechnology Immobilization of GOD on fluorescent SiO nanoparticles 303 2 K. Li, H.C. Liu, J. Huang & L.Y. Ding Adsorption of oil contamination on water surface with nanoscale MoS powder and 2 MoS self-reclamation and reutilization 307 2 X.H. Li, P. Wang, B.S. Lv, J. He & S. Xiao A facile method for the preparation of hollow mesoporous organic silica nanospheres 311 J. Li, Z.H. Liu, L.X. Chen, X. Li, C.C. Zhang & J. Zhang Chitosan coated magnetic nanoparticles for extraction and analysis trace-level perfluorinated compounds in water solution coupled with UPLC-MS/MS 315 Y.H. Wang, L.F. Hu, W. Jiang, Y. Nie, C. Hong & G.H. Lu Crystallization and mechanical properties of Multi-Walled Carbon Nanotubes modified polyamide 6 321 X.T. Chen, H.J. Liu & X.Y. Zheng Fabrication and photocatalytic performance of FeO@SiO@BiOCl 3 4 2 magnetic nanocomposite 325 D.H. Cui, Y.Y. Li, X.D. Ruan, X.C. Song & Y. Zhang Synthesis of nanosilver conductive ink for flexible circuit on cotton fabric substrate 329 Z.J. Rao, Z.H. Wang, W. Wang & D. Yu Ecological toxicity of engineered nano materials to the organisms in the environment 335 X.F. Cao & L.P. Liu Research on the preparation and activity of BiOBr-TiO nanobelt heterostructured 2 photocatalyst with high visible light responsive activity 339 Y.H. Ao, J.L. Xu, P.F. Wang & C. Wang Biosynthesis of cadmium sulfide nanoparticles using Desulfovibrio desulfuricans 345 J. Gong, X.M. Song, Y. Gao, S.Y. Gong, Y.F. Wang & J.X. Han Material behavior Structural dynamic analysis on idealized joint model in portal crane 353 D.Q. Zhou, X.H. Cao & P. Yu Stress concentration factors for the multi-planar tubular Y-joints subjected to axial loadings 359 B. Wang, N. Li, X. Li & Y. Li Effect of dry friction structures on stator blade 367 J.H. Xie, H. Wu, R.S. Yuan & Z.Y. Zhang Microstructure and shear strength of low-silver SAC/Cu solder joints during the thermal cycle 373 H.S. Wang, G.S. Gan, D.H. Yang, G.Q. Meng & H. Luo Stress Concentration Factors for the multi-planar tubular Y-joints subjected to in-plane bending loadings 377 B. Wang, N. Li, X. Li, J.Q. Xu & J.W. Zhang Influence of bearing materials on elastohydrodynamic lubrication of angular contact ball bearing 385 B.M. Wang, X.Y. Liao, Z.X. Wu & X.S. Mei Electronics material and electrical engineering Electrochemical reduction of CO by a Cu/graphene electrode 395 2 X. Liu, L.S. Zhu, H. Wang & Z.Y. Bian viii IICCMMSSEEEE1155..iinnddbb vviiiiii 1111//1166//22001155 33::2233::1199 AAMM First principle study on the electronic structure of NbB and ZrB under pressure 399 Y.Q. Chai Facial synthesis hollow hemisphere LiFePO cathode for lithium-ion batteries 403 4 Y.H. Luo, N. He, Y.C. Wang, W.G. Cao & F. Pan Synthesis of Ce-doped zircon ceramics designed to immobilize tetravalent actinides 407 X.N. Liu, Y. Ding & X.R. Lu A light and broadband absorber utilizing resistive FSS and metamaterial layer 411 Y. Shen, Z.B. Pei, H.Y. Yuan, S.B. Qu & Y.Q. Pang Effect of irradiation on the microstructures, ferroelectric and dielectric properties of P (VDF-TrFE) copolymer films 415 L. Tian, Y.P. Li, J. Sun & X.H. Zhang Analysis of stop-band FSS with all dielectric metamaterial 421 F. Yu, S.B. Qu, J. Wang, H.L. Du, J.F. Wang & L. Lu Properties of fly ash used in ceramsite which from the power plant in Luanping county, Hebei province, China 425 M.H. You, F. Zhou, H.T. Peng, X.P. Zhang, T. Wang, D. Wang, Z.B. Yu & Y.D. Zhu Effect of anionic surfactants with different carbon chain lengths on CO hydrate formation 429 2 Z.Z. Jia, Y. An, F. Wang, S.J. Luo & R.B. Guo First-principles calculation of thermoelectric NaCoO bulk 433 2 P.X. Lu & X.M. Wang A new fault-distance algorithm using single-ended quantity for distance relaying 439 Z.Y. Xu, J.W. Meng, S.P. Li, Y. Wang, Y.C. Qiao & T.B. Zong Ten meters S-band antenna gain measurement based on sun method 447 L.J. Zhou, X.W. Su, Y.M. Nie & X.G. Zhai A circular polarization conversion based on multilayer split square ring Frequency Selective Surface 451 Y. Fan, Y.F. Li, D.Y. Feng, S.B. Qu, J.B. Yu & M.D. Feng Materials in mechanical process Research on the large gear detecting system based on LabVIEW 457 L.M. Hao, X.J. Zhang, B.X. Li, S.F. Li, Y.H. He & R.J. Jia Analyzing the improved model of the Bourdon tube using a uniform strength cantilever beam FBG pressure sensor 463 J. Shao, Z.A. Jia, J.H. Liu & X.X. Bai Chaos synchronization of two Light-Emitting Diode systems with complex dynamics via adaptive H-infinity control 467 Y. Che, X. Cui, B. Liu, C. Han & M. Lu Evaluation of low measurement uncertainty for efficiency of three-phase induction motor 471 F. Li, X.B. Yang, M.J. Shi, Y.X. Zhang & J. Li Study on multi-cylindrical Magneto-Rheological Fluid Clutch 477 D.M. Chen, H. Zhang & Q.G. Cai Pressure-driven flow considering contact angle effect 483 C. Yang Error analysis of cam mechanism of translating roller follower 489 H.W. Zhou Error analysis and precision estimation of the locating device of welding fixture of rear axle bracket 493 H.W. Zhou ix IICCMMSSEEEE1155..iinnddbb iixx 1111//1166//22001155 33::2233::1199 AAMM Study on welding repair process of turbine blade 497 W.J. Gou, D.J. Meng, L.H. Wang & W. Hu Requirement analysis research of a new type armored anti-riot vehicle based on QFD and AHP 501 C.Z. Ma, Y.X. Ling & W.X. Zhang Experimental study of flow boiling heat transfer deterioration in helical-coiled tube 507 C.L. Ji, J.T. Han, X.P. Liu & Y.M. Feng Performance study on a novel design of a jet-inspired horizontal axis tidal stream turbine by a CFD numerical tool 511 M. Orji, S.Q. Hu, Z. Liang & J. Yan Hydrolysis of BNPP catalyzed by the copper (II) complex 519 W. Hu, S.X. Li, W. Ying & J. He Environmental chemistry and biology Research of removing nitrate by sulfur-based autotrophic denitrification technology 525 W.W. Ma, H. Wang, D.Y. Jiao & M.L. Chen Transmission model of Ebola in the dynamic small-world network 529 C.C. Liao Enhanced removal of nutrient by Bio-Film floating bed 533 Y.H. Shui, Y.M. Jin, C. Su, C.L. Yang, Y.Y. Jin, R. Zhang & J.H. Shen Studies on the diversity of Sulfate-Reducing Bacteria in sediments from Baihua Lake with molecular biological techniques 537 L.Y. Fu, L.Y. Li, J.W. Hu, X.F. Huang, P.H. Xia, J. Luo, M. Jia, Y.M. Lin, X.D. Shi & J.L. Li The inhibitory factors of the anammox process 545 Z.J. Yin, L.H. Zang & D.D. Ji Effects of geophagous earthworms Eisenia fetida on sorption of Phthalate Acid Esters to soils 549 L.L. Ji & L.P. Deng Inhibitory effects of nisin on Staphylococcus aureus and Xanthomonas 555 B.G. Zhang, Y.E. Qing, X.T. Wang, G.Q. Zhao & G.H. Hu Toxicological effects of perfluorooctanoic acid (PFOA) on Daphnia magna 559 G.H. Lu, B.N. Ma, S. Li & L.S. Sun Adsorption of rhodamine B onto TiO-loaded Activated Carbon Fibers 565 2 P. Chen, D. Zhu, L. Jiang, J.Y. Chen, R.L. Liu & J.W. Feng Pollution control A complete solution of the optimal pollution path 571 X.X. Yan, J.S. Zhang & S.H. Zou Pollution characterization of water-soluble anions in TSP and PM in Wuhan Economic 10 and Technological Development Zone, China 575 A.H. Li, J.T. Jiang & Q.G. Liu Heavy metal distribution features and pollution assessment in different grain-size surface sediments at the Yellow River Estuary 581 S. Lin, M. Cong & X.X. Luo Assessment of heavy metal pollution and ecological risks for sediments from Baihua Lake, China 585 M.Y. Fan, H. Yang, Y.M. Lin, X.D. Shi, J.L. Li, L.Y. Li & J.W. Hu Combustion of biomass and waste materials in the Czech Republic: Determination of mixed emission limits 591 T. Výtisk & R. Janalík x IICCMMSSEEEE1155..iinnddbb xx 1111//1166//22001155 33::2233::1199 AAMM
Description: