MARTI 4100 North 24th Street, Quincy, Illinois 62305 USA• Phone (217) 224-9600 • Fax (217) 224-9607 www.martielectronics.com • [email protected] ELECTRONICS STL-20M Transmitter SR-20M Receiver MARTI ELECTRONICS STL-20M Transmitter & SR-20M Receiver Upgrade Instructions for 10 kHz Maximum Audio Bandwidth 597-8105-002, Revision B 08/11/06 ©2006 Marti Electronics. All rights reserved. Specifications subject to improvement or change without notice. Marti and the Marti logo are registered trademarks of Marti Electronics. All other trademarks are property of their respective owners. MARTI Electronics STL-20M Transmitter & SR-20M Receiver Upgrade Instructions for 10 kHz Maximum Audio Bandwidth ©2006 Marti Electronics Inc. All rights reserved. The information in this publication is subject to improvement and change without notice. Although every effort is made to ensure the accuracy of the information in this manual, Marti Electronics accepts no responsibility for any errors or omissions. Marti Electronics reserves the right to modify and improve the design and specifications of the equipment in this manual without notice. Any modifications shall not adversely affect performance of the equipment so modified. Proprietary Notice This document contains proprietary data of Marti Electronics. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, translated into any other language in any form or by any means, electronic or mechanical, including photocopying or recording, for any purpose, without the express written permission of Marti Electronics. Trademarks Marti Electronics and the Marti logo are registered trademarks of Marti Electronics. All other trademarks are property of their respective owners. Table of Contents 1. Upgrade Overview..................................................................................2 1.1. Tools / Items Needed...............................................................................2 1.2. ESD Awareness........................................................................................2 1.3. Estimated Time for Upgrade....................................................................2 2. Upgrade the STL-20M Transmitter Audio Board....................................3 3. Upgrade the SR-20M Receiver Audio Board...........................................5 4. Restart the Link.......................................................................................7 5. Marked-Up Schematics and PCB Assembly Drawings............................7 5.1. STL-20M Audio Board (800-285A20M)....................................................7 5.2. SR-20M Audio Board (913-2137).............................................................7 . 1. Upgrade Overview This document provides instructions to Upgrade the Marti STL-20M Transmitter and SR-20M Receiver for 10 kHz maximum audio bandwidth. This upgrade consists of adding/replacing capacitors on audio boards in both the STL-20M Transmitter and the SR-20M Receiver. 1.1. Tools / Items Needed No. 1 Phillips Screwdriver 700˚F Soldering Iron with 1/10” Pencil Tip SN 63PB37 Solder or Equivalent General Soldering Tools Capacitors, STL-20M Transmitter (supplied by Marti Electronics) P/N 215-301, Capacitor, Poly, 300pF, 2.5%, 100V (Qty 1 – C21) P/N 255-221C, Capacitor, Ceramic, 220pF, X7R (Qty 1 – C22) P/N 215-332, Capacitor, Poly, 3300pF, 2.5%, 100V (Qty 1 – C24) P/N 255-271C, Capacitor, Ceramic, 270pF, 5%, 200V (Qty 1 – C25) Capacitors, SR-20M Receiver (supplied by Marti Electronics) P/N 007-1512-500, Capacitor, Ceramic, 150pF, 2%, 50V (Qty 1 – C19) P/N 007-5602-500, Capacitor, Ceramic, 56pF, 2%, 50V (Qty 2 – C20, C23) P/N 007-1024, Capacitor, Ceramic, 0.001uF, 10%, 50V (Qty 1 – C22) 1.2. ESD Awareness When handling the Audio Boards, be sure to exercise ESD precautions as the Audio Boards may contain ESD sensitive components. 1.3. Estimated Time for Upgrade Providing that you have the tools listed above, it will take approximately 30 – 45 minutes to complete the Upgrade of the STL-20M Transmitter and the SR-20M Receiver. MARTI Page 2 of 7 ©2006 Marti Electronics ELECTRONICS 2. Upgrade the STL-20M Transmitter Audio Board Step 1 – Turn the unit OFF and disconnect the AC Power cord. Step 2 – Disconnect all cables and remove the unit from the equipment rack. Step 3 – Use a No. 1 Phillips Screwdriver and remove the cover from the unit. Step 4 – Locate the Audio Board (P/N 800-285). Step 5 – Disconnect wire harness connector J2 from P1 on the Board. Step 6 – Disconnect wire harness connector J3 from P2 on the Board. Step 7 – Use a No.1 Phillips Screwdriver and remove Audio Board (P/N 800-285) from the unit. J3/P2 Use a No. 1Phillips Screwdriver to remove mounting hardware (6) places Audio Board P/N 800-285 J2/P1 Figure 1 – Audio Board (P/N 800-285) Location MARTI Page 3 of 7 ©2006 Marti Electronics ELECTRONICS Step 8 – Remove C22, C24, and C25 from the Audio Board. Step 9 – Install and solder C21 (P/N 215-301, 300pF – supplied by Marti Electronics) in parallel as shown with the existing C21 on the board. Step 10 – Install and solder C22 (P/N 255-221C, 220pF – supplied by Marti Electronics). Step 11 – Install and solder C24 (P/N 215-332, 3300pF – supplied by Marti Electronics). Step 12 – Install and solder C25 (P/N 255-271C, 270pF – supplied by Marti Electronics). C22 C21 C25 C24 Figure 2 – Audio Board (P/N 800-285) Modifications Step 13 – Install the Audio Board back into the unit ensuring that P1 and P2 are located as shown in Figure 1. Step 14 – Re-connect wire harness connector J2 to P1 on the Audio Board. Step 15 – Re-connect wire harness connector J3 to P2 on the Audio Board. Step 16 – Install the cover on the unit. Step 17 – Install the unit back into the equipment rack. Step 18 – Re-connect all cabling. MARTI Page 4 of 7 ©2006 Marti Electronics ELECTRONICS 3. Upgrade the SR-20M Receiver Audio Board Step 1 – Turn the unit OFF and disconnect the AC Power cord. Step 2 – Disconnect all cables and remove the unit from the equipment rack. Step 3 – Use a No. 1 Phillips Screwdriver and remove the cover from the unit. Step 4 – Locate the Audio Board (P/N 913-2137). Step 5 – Disconnect wire harness connector P1 from J1 on the Board. Step 6 – Disconnect wire harness connector P2 from J2 on the Board. Step 7 – Use a No.1 Phillips Screwdriver and remove Audio Board (P/N 913-2137) from the unit. P1/J1 Audio Board P2/J2 P/N 913-2137 Use a No. 1Phillips Screwdriver to remove mounting hardware (4) places Figure 3 – Audio Board (P/N 913-2137) Location MARTI Page 5 of 7 ©2006 Marti Electronics ELECTRONICS Step 8 – Install and solder C19 (P/N 007-1512-500, 150pF – supplied by Marti Electronics) in parallel as shown with the existing C19 on the board. Step 9 – Install and solder C20 (P/N 007-5602-500, 56pF – supplied by Marti Electronics) in parallel as shown with the existing C20 on the board. Step 10 – Install and solder C22 (P/N 007-1024, 0.001uF – supplied by Marti Electronics) in parallel as shown with the existing C22 on the board. Step 11 – Install and solder C23 (P/N 007-5602-500, 56pF – supplied by Marti Electronics) in parallel as shown with the existing C23 on the board. C22 C19 C23 C20 Figure 4 – Audio Board (P/N 913-2137) Modifications MARTI Page 6 of 7 ©2006 Marti Electronics ELECTRONICS Step 12 – Install the Audio Board back into the unit ensuring that J1 and J2 are located as shown in Figure 3. Step 13 – Re-connect wire harness connector P1 to J1 on the Audio Board. Step 14 – Re-connect wire harness connector P2 to J2 on the Audio Board. Step 15 – Install the cover on the unit. Step 16 – Install the unit back into the equipment rack. Step 17 – Re-connect all cabling. 4. Restart the Link Step 1 – Turn the STL-20M Transmitter ON. Step 2 – Turn the SR-20M Receiver ON. 5. Marked-Up Schematics and PCB Assembly Drawings 5.1. STL-20M Audio Board (800-285A20M) 5.2. SR-20M Audio Board (913-2137) MARTI Page 7 of 7 ©2006 Marti Electronics ELECTRONICS p a PCB;0pFC he27 RemoveC25fromtInstallandSolderaP/N255-271C ap C PCB;00pF he33 RemoveC24fromtInstallandSolderaP/N215-332 p a PCB;0pFC he22 RemoveC22fromtInstallandSolderaP/N255-221C 300pFCapinP/N215-301 olderaarallel, SP