450 Manual en Español Latino Americano: ASSEMBLY MANUAL / OWNER’S MANUAL http://www.schwinnfitness.com TABLE Of CONTENTS Important Safety Instructions - Assembly 3 Adjustments 31 Safety Warning Labels / Serial Number 4 Initial Setup 33 Specifications 5 Quick Start / Manual Program 33 Before Assembly 5 Guest User / Profile Program 33 Parts 6 User Setup Mode 34 Hardware 7 Profile Programs 38 Tools 7 Fitness Test 39 Assembly 8 Heart Rate Control Workout 39 Moving the Machine 21 Distance Goal Workout 40 Leveling the Machine 22 Results/Cool Down Mode 40 Pausing or Stopping 41 Important Safety Instructions 23 User Statistics 41 Features 24 Console Setup Mode 43 Console Features 25 Maintenance 45 Remote Heart Rate Monitor 27 Troubleshooting 48 Operations 30 To validate warranty support, keep the original proof of purchase and record the following information: Serial Number __________________________ Date of Purchase ____________________ To register your product warranty , go to: www.SchwinnFitness.com/register Or call 1 (800) 605–3369. If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458). Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. +01-360-859-5180, [email protected] | Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN® and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners 2 IMpORTANT SAfETY INSTRUCTIONS -ASSEMBLY This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Obey the following warnings: Read and understand all warnings on this machine. Carefully read and understand the Assembly instructions. • Keep bystanders and children away from the product you are assembling at all times. • Do not connect power supply to the machine until instructed to do so. • Do not assemble this machine outdoors or in a wet or moist location. • Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders. • Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own. • Set up this machine on a solid, level, horizontal surface. • Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty. • If replacement parts are necessary, use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual. • Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference. • Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function. 3 REVISIONS ECO REVISION REV DESCRIPTION APPROVED DATE MATERIAL. Labels must be created from an agency approved tamper proof labeling system NPI 13149 A RELEASED DLOVELY 7-22-10 such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent. Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic), Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test. COLOR. DIE LINE PMS 152 PMS 109 BLACK WHITE SAfETY WARNINg LABELS ANd SERIAL NUMBER • Keep children away. • Prior to use, read and understand the Owners Manual. • Injury or death is possible if Caution is not used while using this machine. • The maximum user weight for this machine is 300 lbs (136 Kg). • Replace any “Caution” “Warning” or “Danger” label that is illegible, damaged, or removed. • This machine is for home use only. • • • • 300lbs. (136kg). • • • 21.78mm • FCC Compliance Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to 5o4p.e8rmatme the equipment. The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This power supply has been tested and found t•o comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid• ential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4 • Consult the dealer or an experienced radio/TV technician for help. UNLESS OTHERWISE SPECIFIED: METRIC TOLERANCES. APPROVALS TITLE.CRUSH WARNING 1. ALL ITEMS MUST BE RoHS COMPLIANT X. 2.5 D.LOVELY 2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING. X.X 1.5 7-22-10 - - 43.. ARELML MOVAEC HALINLE BSU SRURRSF, ABCREEAS KR aS H3.A2R uPM E.DGES 0.5 MM MAX. XX..XXXXX 00..7255 DESIGNED D.LOVELY PART NO. A SCIZE NAUTILUS, INC. 6 5 .. SAAPLLELLC ADIFPIMIPCLEAINCTSIAOIBONLNSES AN APARPUELT YIIN.L UMSI LSLTIAMNEDTEARRSDS AND PTHROIRJDE CATNIOGNLE AINTNERGPRUETL DAIMRENSIONS A N1D° TOLERANCES - - - - DRAWN D.LOVELY 004-0930 REV. 16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683 7. ALL DUAL DIMENSIONS ARE IN INCH PER ASME Y14.5M - 1994 DATE 07 /22 / 2010 LIFECYCLE WARRANTY ITEM: This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights. SCALE: 1:1 SHEET 1 OF 1 DO NOT SCALE DRAWING METRIC_C_REV G SpECIfICATIONS Maximum User Weight: 300 lbs. (136 kg) Maximum Inclined Pedal Height: 19 inches 68.3” (173.6 cm) Power Requirements: Operational Voltage: Operational Voltage 9VDC Operating Current: 1500 mA Regulatory Approvals: AC Power Adapter: UL listed, CSA certified (or 70.4” equivalent), Rated 120V 60Hz 26.1” (178.9 cm) Input, 9VDC, 1500mA Out- (66.3 cm) put. Class 2 or LPS. Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74.1” x 118.4” (188.2 cm x 300.7 cm). Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of the elliptical machine. Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the “Important Safety Instructions” before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly requires 2 people. 5 pARTS 1 4 5 3 2 6 16 7 8 15 9 14 12 10 13 11 A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly. Item Qty Description Item Qty Description 1 1 Console 10 1 Rail Assembly ( * ) 2 1 Arm Pivot Rod 11 1 AC Adapter 3 1 Console Mast 12 1 Left Leg 4 1 Static Handlebar 13 1 Left Pedal 5 1 Upper Right Handlebar Arm 14 1 Lower Left Handlebar Arm 6 1 Right Pedal 15 1 Front Stabilizer 7 1 Lower Right Handlebar Arm 16 1 Upper Left Handlebar Arm 8 1 Frame 17 1 MP3 Cord (not shown) 9 1 Right Leg ( * ) Do not cut Shipping Zip-Tie until instructed. 6 HARdWARE / TOOLS A B C D E F G H I J K L M N O P Q R S T Item Qty Description Item Qty Description A 8 Flat Head Hex Screw, M8x1.25x20 K 24 Lock Washer, M8 B 2 Plate, Pedal L 2 Lock Nut, M8 C 6 Cap, Small M 4 Hex Screw, M8x1.25x25 D 8 Button Head Hex Screw, M8x1.25x20 N 2 Wide Washer, 38mm E 2 Flat Head Hex Screw, M8x1.25x14 O 2 Sleeve F 12 Button Head Hex Screw, M8x1.25x16 P 4 Cap, Large G 4 Button Head Hex Screw, M6x1.0x14 Q 2 Wave Washer H 4 Flat Washer, M6 R 4 Lock Nut, M6 I 2 Button Head Hex Screw, M8x1.25x70 S 2 Wide Washer, M8 J 14 Curved Washer, M8 T 10 Flat Washer, M8 Tools Included Not Included 4 mm 6 mm 10 mm (recommended) 13 mm (x2) 6 mm (long) #2 7 ASSEMBLY 1. Attach Front Stabilizer to Frame 8 6mm 5 8 2. Attach Rail Assembly to Frame Assembly NOTICE: Do not cut Shipping Zip-Tie until instructed. Do not fully tighten this hardware. 6mm 10 9 3. Tilt the Frame Assembly and Secure the Rail Assembly The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. NOTICE: This step requires at least two people. Fully tighten all hardware from previous steps. X2 E 6mm 10