Materials Processing Technology EL+S EVIER Journal of Materials Processing Technology 159 (2005) 445-446 www.elsevier.com/locate/jmatprotec Author Index of Volume 159 Abdul Rajak, S., 409 Gronostajski, Z., 377 Mahrenholtz, O., 9 Alcala, F.C., 164 Makiyama, T., 139 An, G., 265 Hameedullah, M., 145 Maleque, M.A., 145 Andersson, A., 426 Han, H., 401 Mannan, S.L., 48 Andrade, R.M., 125 Han, Z.-W., 383 Mao, J., 314 Araujo-Osorio, J.E., 164 Hassan, M.A., 418 Marceau, L.F., 17 Arentoft, M., 62 He, X.-B., 135 Marquez, J.J., 69 Arrieux, R., 152 Hinds, B.K., 181 Martins, P.A.F., 214 Aydemir, A., 303 Hsu, R.-Q., 1 McCartney, J., 181 Huang, H., 229 Memola Copece Minutolo, F., 279 Baltateanu, D., 311 Huang, Y.-M., 257 Mitra, S., 286 Bastiirk, G., 99 Mognol, P., 33 Battaglia, J.L., 119 Iankov, R., 9 Moisan, A., 119 Beer, P., 224 Isik, Y., 191 Mukhopadhyay, C.K., 48 Bhattacharyya, B., 286 Ismail, N., 145 Murata, M., 139 Bontcheva, N., 9 Murayama, M., 199 Boutinguiza, M., 83 Jansson, T., 426 Myoung, J.-M., 159 Braghini Jr., A., 240 Jayakumar, T., 48 Brekelmans, W.A.M., 303 Jeong, M.-C., 159 Nagasawa, S., 199 Jiang, C.-P., 257 Naizhang, Y., 272 Caiazzo, F., 279 Jiawen, X., 272 Nilsson, L., 426 Cava, S., 125 Chandra, S., 295 Kaitkay, P., 206 Onipede, O., 91 Cemal Cakir, M., 191 Kamisli, F., 40 Chen, M.-D., 1 Kang, C.G., 321, 330 Palma, E.S., 435 Chen, W.K., 229 Kang, H.S., 159 Park, C.E., 113 Cheng, S.X., 295 Kang, S.B., 314 Park, J.0., 314 Chun, B.S., 389 Katayama, I., 199 Pashby, I.R., 356 Corréa, D.C., 435 Kelly, D., 181 Paskocimas, C.A., 125 Coudert, T., 152 Kim, H.H., 113 Paulescu, M., 311 Curcio, F., 279 Kim, [.J., 113 Pérez, J.M., 69 Curodeau, A., 17 Kim, LS., 113 Pérez-Amor, M., 83 Ko, Y.-D., 159 Postek, E.W., 338 Daurelio, G., 279 Kotera, H., 397 Pou, J., 83 de Vree, J.H.P., 303 Kruszynski, B., 249 Prakash, S., 347 Diniz, A.E., 240 Kula, P., 249 Puri, D., 347 Dorantes-Rosales, H.J., 164 Lassen, S., 62 Quintero, F., 83 Ferician, F., 311 Lee, J.H., 389 Fowler, G., 356 Lee, S.Y., 159 Raj, B., 48 Frias-Flores, J., 164 Lei, S., 206 Rajurkar, K.P., 272 Fuh, K.-H., 1 Lessard, J., 17 Rangel-Ortiz, T., 164 Fukuzawa, Y., 199 Lewis, R.W., 338 Ransing, R.S., 338 Furet, B., 33 Li, T., 295 Rech, J., 119 Liang, G.Y., 265 Reddy, N.V., 409 Garza, L.G., 169 Lindegren, M., 62 Ren, L.-Q., 383 Gawronski, Z., 249 Liu, C., 383 Richard, M., 17 Geers, M.G.D., 303 Longo, E., 125 RobertoLeite, E., 125 Gethin, D.T., 338 Lopez Hirata, V.M., 164 Rodrigues, J.M.C., 214 Gillot, F., 33 Lovell, M., 91 Rios, J., 69 Gindl, M., 224 Lu, W.-P., 383 Rossi, C.C., 125 Gokhale, A.A., 369 Lusquinos, F., 83 Gomes, C., 91 Sales, W.F., 435 Gomes, D.M., 240 MacAlpine, J.M.K., 265 Santos, S.C., 435 Elsevier B.V. doi: 10.1016/S0924-0136(04)01300-7 446 Author Index of Volume 159 Sapuan, S.M., 145 Suddin, M.N., 145 Wanheim, T., 62 Saucedo-Munoz, M.L., 164 Suenaga, R., 418 Watkins, K., 83 Sarkar, S., 286 Werkhoven, R.J., 303 Schlett, Z., 311 Tabourot, L., 152 Wong, T.T., 265 Seo, P.K., 321, 330 Takakura, N., 418 Shangwu, X., 214 Tong, J., 383 Xia, Q., 397 Shima, S., 397 Toussaint, F., 152 Shipway, P.H., 356 Tschegg, S., 224 Sidhu, B.S., 347 Turan, C., 40 Yamaguchi, K., 418 Sillekens, W.H., 303 Yamaguchi, T., 199 Silva, S.N., 125 Vacher, P., 152 Yang, H., 135 Singh, V., 369 Van Tyne, C.J., 169 Yangxin, T., 272 Sinn, G., 224 Varela, J.A., 125 Yapici, H., 99 Soledade, L.E.B., 125 Venugopal, S., 48 Yasuhuku, D., 397 Son, J.S., 113 Vitanov, V.I., 27 Yin, L., 229 Soto, R., 83 Vizan, A., 69 Youn, S.W., 321, 330 Steen, W.M., 83 Voutchkovy, I.I., 27 Yun, L., 159 Journal of Materials OO Ee Processing eT Technology ELSEVIER Journal of Materials Processing Technology 159 (2005) 447-452 www.elsevier.com/locate/jmatprotec Subject Index of Volume 159 AA8090 Bimetallic bearings Effect of Zr content and mechanical working on the structure and Machinability of bimetallic bearings using cemented carbide tools: tensile properties of AA8090 alloy plates, 369 evaluation of the wear mechanisms, 435 Acoustic emission technique Blank design A review of the application of acoustic emission techniques for Investigation on the variation of deep drawability of STS304 using monitoring forming and grinding processes, 48 FEM simulations, 389 Adaptive simulation approach Blanking An adaptive simulation approach designed for tube hydroforming A review of the application of acoustic emission techniques for processes, 303 monitoring forming and grinding processes, 48 Additive model Boring Parametric analysis and optimization of wire electrical discharge Machinability of bimetallic bearings using cemented carbide tools: machining of y-titanium aluminide alloy, 286 evaluation of the wear mechanisms, 435 Ageing time Boundary element method Data base construction on mechanical properties of thixoforged Simulation of plane strain rolling through a combined element free aluminum parts and their microstructure evaluation, 330 Galerkin—boundary element approach, 214 Alligatoring Busbars ' Prediction of internal defects in plane strain rolling, 409 The electrical conductivity of laser-remelted and plasma-sprayed Al-Li-Hf alloys Ni and Cr coatings, 265 Microstructure and tensile properties of a continuous-cast Al—Li- Hf alloy, 164 Carburising Aluminium-—lithium Synergistic effects of thermo-chemical treatment and super abrasive Effect of Zr content and mechanical working on the structure and grinding in gears’ manufacturing, 249 tensile properties of AA8090 alloy plates, 369 Cast alloys Anisotropic Microstructure and tensile properties of a continuous-cast Al—Li-— Modelling of anisotropic performance fabrics, 181 Hf alloy, 164 Anisotropy Casting Investigation of springback in high strength anisotropic steels, Effect of Zr content and mechanical working on the structure and 9] tensile properties of AA8090 alloy plates, 369 Determination of mean flow stress and friction coefficient by the CBN grinding modified two-specimen method in cold rolling, 401 Synergistic effects of thermo-chemical treatment and super abrasive Applied pressure grinding in gears’ manufacturing, 249 Data base construction on mechanical properties of thixoforged CBN tools aluminum parts and their microstructure evaluation, 330 Turning of hardened steel with interrupted and semi-interrupted Arbitrary shaped dies cutting, 240 Finite element analysis of thixoforming process with arbitrary Cemented carbide shape die, 321 Machinability of bimetallic bearings using cemented carbide tools: Artificial neural networks evaluation of the wear mechanisms, 435 Neural network based modeling of PL intensity in PLD-grown ZnO Central burst thin films, 159 Prediction of internal defects in plane strain rolling, 409 Automatic mesh generation Channel section Finite element analysis of thixoforming process with arbitrary Spline finite strip analysis of forming parameters in roll forming a shape die, 321 channel section, 383 Automation Characterisations Process modeling for robotic polishing, 69 Mechanical and metallurgical properties of plasma sprayed and Automotive bumper system laser remelted Ni—20Cr and Stellite-6 coatings, 347 A note on the conceptual design of polymeric composite automotive Chip formation bumper system, 145 Experimental study of rock cutting under external hydrostatic AWJ pressure, 206 A technical note on grit embedment following abrasive water-jet Chipless machining milling of a titanium alloy, 356 A technical note on grit embedment following abrasive water-jet milling of a titanium alloy, 356 Bead geometry CNC extrusion machine An investigation into an intelligent system for predicting bead A technical note on the development of prototype CNC variable geometry in GMA welding process, 113 vertical section extrusion machine, 139 Elsevier B.V. doi: 10.1016/S0924-0136(04)01301-9 448 Subject Index of Volume 159 CO, laser Digital image correlation Drilling of slate tiles by CO> laser, 83 Numerical determination of strain localisation during finite element CO, laser cutting process simulation of deep-drawing operations, 152 Laser cutting of different polymeric plastics (PE, PP and PC) by a Dimensional accuracy CO, laser beam, 279 Dimensional accuracy studies of copper shells used for electro- Coatings discharge machining electrodes made with rapid prototyping Thermal influence of cutting tool coatings, 119 and the electroforming process, 33 Mechanical and metallurgical properties of plasma sprayed and Draw bead laser remelted Ni—20Cr and Stellite-6 coatings, 347 Optimization of draw-in for an automotive sheet metal part. An Cold forming evaluation using surrogate models and response surfaces, 426 Reversed straining in axisymmetric compression test, 62 Draw-in Cold rolling Optimization of draw-in for an automotive sheet metal part. An Determination of mean flow stress and friction coefficient by the evaluation using surrogate models and response surfaces, 426 modified two-specimen method in cold rolling, 401 Drawing Compression molding A review of the application of acoustic emission techniques for New EDM polishing and texturing process with conductive poly- monitoring forming and grinding processes, 48 mer electrodes, 17 Droplet generator Conceptual design Producing molten metal droplets with a pneumatic droplet-on- A note on the conceptual design of polymeric composite automotive demand generator, 295 bumper system, 145 Drop-on-demand Conductivity Producing molten metal droplets with a pneumatic droplet-on- The electrical conductivity of laser-remelted and plasma-sprayed demand generator, 295 Ni and Cr coatings, 265 Continuous caster EDM Microstructure and tensile properties of a continuous-cast Al—Li— New EDM polishing and texturing process with conductive poly- Hf alloy, 164 mer electrodes, 17 Contour evolution Electrochemical machining (ECM) The modelling of NC-electrochemical contour evolution machining The modelling of NC-electrochemical contour evolution machining using a rotary tool-cathode, 272 using a rotary tool-cathode, 272 Coupled problems Electrodes Influence of initial stresses on the cast behaviour during squeeze Dimensional accuracy studies of copper shells used for electro- forming processes, 338 discharge machining electrodes made with rapid prototyping Cracking and the electroforming process, 33 Surface hot-shortness of 1045 forging steel with residual copper, Electro-discharge machining 169 Dimensional accuracy studies of copper shells used for electro- Crushing discharge machining electrodes made with rapid prototyping Orthotropic effect and strain dependency of paperboard on load and the electroforming process, 33 characteristic of center bevel cutter indented on paperboard, 199 Electroforming Crystallographic analysis Dimensional accuracy studies of copper shells used for electro- On the possibility of obtaining silicon carbide using the glow- discharge machining electrodes made with rapid prototyping discharge electron gun, 311 and the electroforming process, 33 Cutting Element free Galerkin method Thermal influence of cutting tool coatings, 119 Simulation of plane strain rolling through a combined element free Cutting edge Galerkin—boundary element approach, 214 Orthotropic effect and strain dependency of paperboard on load Energy characteristic of center bevel cutter indented on paperboard, 199 Work of fracture and of chips formation during linear cutting of Cutting force particle-board, 224 Experimental study of rock cutting under external hydrostatic Equal-channel angular pressing pressure, 206 Grain refinement, thermal stability and tensile properties of 2024 aluminum alloy after equal-channel angular pressing, 314 Deep drawing Erosion Numerical determination of strain localisation during finite element A technical note on grit embedment following abrasive water-jet simulation of deep-drawing operations, 152 milling of a titanium alloy, 356 Investigation on the variation of deep drawability of STS304 using Experimental analysis FEM simulations, 389 A technical note on the development of prototype CNC variable A study of the one-path deep drawing spinning of cups, 397 vertical section extrusion machine, 139 A novel process on friction aided deep drawing using tapered blank Extrusion holder divided into four segments, 418 A technical note on the development of prototype CNC variable Designing and optimizing thixoformed products vertical section extrusion machine, 139 Finite element analysis of thixoforming process with arbitrary shape die, 321 Fabric modelling Diamond wheel Modelling of anisotropic performance fabrics, 181 Loose abrasive truing and dressing of resin bond diamond cup FEA wheels for grinding fibre optic connectors, 229 Prediction of internal defects in plane strain rolling, 409 Diffusion FEM Neural network based modeling of PL intensity in PLD-grown ZnO Influence of surface roughness on friction during metal forming thin films, 159 processes, 9 Subject Index of Volume 159 Investigation on the variation of deep drawability of STS304 using Industrial net shape forming application FEM simulations, 389 Finite element analysis of thixoforming process with arbitrary Finishing operation shape die, 321 New EDM polishing and texturing process with conductive poly- Initial stresses mer electrodes, 17 Influence of initial stresses on the cast behaviour during squeeze Finite element analysis forming processes, 338 Investigation of springback in high strength anisotropic steels, Intelligent system 91 An investigation into an intelligent system for predicting bead Numerical determination of strain localisation during finite element geometry in GMA welding process, 113 simulation of deep-drawing operations, 152 Interrupted cutting Finite elements Turning of hardened steel with interrupted and semi-interrupted Influence of initial stresses on the cast behaviour during squeeze cutting, 240 forming processes, 338 Finite strip method Kerf widths Spline finite strip analysis of forming parameters in roll forming a Laser cutting of different polymeric plastics (PE, PP and PC) by a channel section, 383 CO, laser beam, 279 Force Work of fracture and of chips formation during linear cutting of Laser drilling particle-board, 224 Drilling of slate tiles by CO, laser, 83 Forging Laser remelting A review of the application of acoustic emission techniques for The electrical conductivity of laser-remelted and plasma-sprayed monitoring forming and grinding processes, 48 Ni and Cr coatings, 265 Surface hot-shortness of 1045 forging steel with residual copper, Mechanical and metallurgical properties of plasma sprayed and 169 laser remelted Ni—20Cr and Stellite-6 coatings, 347 Forming parameters Localisation Spline finite strip analysis of forming parameters in roll forming a Numerical determination of strain localisation during finite element channel section, 383 simulation of deep-drawing operations, 152 Forward slip Loose abrasive lapping Determination of mean flow stress and friction coefficient by the Loose abrasive truing and dressing of resin bond diamond cup modified two-specimen method in cold rolling, 401 wheels for grinding fibre optic connectors, 229 Friction aided deep drawing A novel process on friction aided deep drawing using tapered blank Machining holder divided into four segments, 418 A review of the applicationo f acoustic emission techniques for Friction coefficient monitoring forming and grinding processes, 48 Determination of mean flow stress and friction coefficient by the Material testing modified two-specimen method in cold rolling, 401 Reversed straining in axisymmetric compression test, 62 Materials engineering Glow-discharge electron gun Process parameters selection for friction surfacing applications On the possibility of obtaining silicon carbide using the glow- using intelligent decision support, 27 discharge electron gun, 311 Mean flow stress GMA welding Determination of mean flow stress and friction coefficient by the An investigation into an intelligent system for predicting bead modified two-specimen method in cold rolling, 401 geometry in GMA welding process, 113 Mechanical properties Grain refinement Preparation of SiC fiber-reinforced SiC composites, 135 Grain refinement, thermal stability and tensile properties of 2024 Mechanical property aluminum alloy after equal-channel angular pressing, 314 Data base construction on mechanical properties of thixoforged Grinding aluminum parts and their microstructure evaluation, 330 A review of the application of acoustic emission techniques for Metal forming monitoring forming and grinding processes, 48 Influence of surface roughness on friction during metal forming processes, 9 Hardened steel turning A review of the application of acoustic emission techniques for Turning of hardened steel with interrupted and semi-interrupted monitoring forming and grinding processes, 48 cutting, 240 Investigation of springback in high strength anisotropic steels, High solid fraction 91 Data base construction on mechanical properties of thixoforged A technical note on the development of prototype CNC variable aluminum parts and their microstructure evaluation, 330 vertical section extrusion machine, 139 Hi-Nicalon/SiC composites Metal spheres Preparation of SiC fiber-reinforced SiC composites, 135 Producing molten metal droplets with a pneumatic droplet-on- Hot shortness demand generator, 295 Surface hot-shortness of 1045 forging steel with residual copper, Metals and alloys 169 Process parameters selection for friction surfacing applications Hydrostatic pressure using intelligent decision support, 27 Experimental study of rock cutting under external hydrostatic Micro-crack generation pressure, 206 Prediction of internal defects in plane strain rolling, 409 Microstructural changes Incremental forming Deformation processing map for control of CuSi3.9 silicon bronze A study of the one-path deep drawing spinning of cups, 397 microstructure, 377 450 Subject Index of Volume 159 Microstructure A note on the conceptual design of polymeric composite automotive Preparation of SiC fiber-reinforced SiC composites, 135 bumper system, 145 Microstructure and tensile properties of a continuous-cast Al—Li- Polyvinyl chloride panels Hf alloy, 164 A study on usability of magnesium oxide with titanium dioxide in Effect of Zr content and mechanical working on the structure and PVC door and window profiles, 40 tensile properties of AA8090 alloy plates, 369 Powders Microtome Producing molten metal droplets with a pneumatic droplet-on- Work of fracture and of chips formation during linear cutting of demand generator, 295 particle-board, 224 Power dissipation Modeling Deformation processing map for control of CuSi3.9 silicon bronze Neural network based modeling of PL intensity in PLD-grown ZnO microstructure, 377 thin films, 159 Preparation processes The modelling of NC-electrochemical contour evolution machining Preparation of SiC fiber-reinforced SiC composites, 135 using a rotary tool-cathode, 272 Processing Moving heat source Effect of Zr content and mechanical working on the structure and Numerical solutions of transient temperature and thermally induced tensile properties of AA8090 alloy plates, 369 stress distributions in a solid disk heated with radially periodic Process optimization expanding and contracting ring heat flux, 99 An adaptive simulation approach designed for tube hydroforming MTSM processes, 303 Determination of mean flow stress and friction coefficient by the Pulling force modified two-specimen method in cold rolling, 401 On-line force monitoring of platform ascending rapid prototyping Multiple regression system, 257 An investigation into an intelligent system for predicting bead Pulsed laser deposition geometry in GMA welding process, 113 Neural network based modeling of PL intensity in PLD-grown ZnO thin films, 159 Neural network Punch stretching An investigation into an intelligent system for predicting bead A review of the application of acoustic emission techniques for geometry in GMA welding process, 113 monitoring forming and grinding processes, 48 Ni—20Cr Mechanical and metallurgical properties of plasma sprayed and Rapid prototyping laser remelted Ni—20Cr and Stellite-6 coatings, 347 On-line force monitoring of platform ascending rapid prototyping Non-local friction system, 257 Influence of surface roughness on friction during metal forming Producing molten metal droplets with a pneumatic droplet-on- processes, 9 demand generator, 295 Numerical control (NC) Rapid tooling The modelling of NC-electrochemical contour evolution machining Dimensional accuracy studies of copper shells used for electro- using a rotary tool-cathode, 272 discharge machining electrodes made with rapid prototyping and the electroforming process, 33 Optimization Reclamation and foundry sand Parametric analysis and optimization of wire electrical discharge Foundry sand recycling in the troughs of blast furnaces: a technical machining of y-titanium aluminide alloy, 286 note, 125 Optimization of draw-in for an automotive sheet metal part. An Recycling evaluation using surrogate models and response surfaces, 426 Foundry sand recycling in the troughs of blast furnaces: a technical Orthotropy note, 125 Orthotropic effect and strain dependency of paperboard on load Regression analysis characteristic of center bevel cutter indented on paperboard, 199 Effects of over-roll thickness on cone surface roughness in shear Over-roll thickness spinning, | Effects of over-roll thickness on cone surface roughness in shear Remeshing spinning, | Finite element analysis of thixoforming process with arbitrary Particle-board shape die, 321 Work of fracture and of chips formation during linear cutting of Residual copper particle-board, 224 Surface hot-shortness of 1045 forging steel with residual copper, 169 Plane strain rolling Resin bond Simulation of plane strain rolling through a combined element free Loose abrasive truing and dressing of resin bond diamond cup Galerkin—boundary element approach, 214 wheels for grinding fibre optic connectors, 229 Prediction of internal defects in plane strain rolling, 409 Response surface method Plasma spray Effects of over-roll thickness on cone surface roughness in shear Mechanical and metallurgical properties of plasma sprayed and spinning, | laser remelted Ni—20Cr and Stellite-6 coatings, 347 Optimization of draw-in for an automotive sheet metal part. Plasma spraying An evaluation using surrogate models and response surfaces, The electrical conductivity of laser-remelted and plasma-sprayed 426 Ni and Cr coatings, 265 Ring heat flux Polishing Numerical solutions of transient temperature and thermally induced Process modeling for robotic polishing, 69 stress distributions in a solid disk heated with radially periodic Polymer composite expanding and contracting ring heat flux, 99 New EDM polishing and texturing process with conductive poly- Robot mer electrodes, 17 Process modeling for robotic polishing, 69 Subject Index of Volume 159 Rock cutting Surface morphology Experimental study of rock cutting under external hydrostatic A technical note on grit embedment following abrasive water-jet pressure, 206 milling of a titanium alloy, 356 Roll forming Surface roughness Spline finite strip analysis of forming parameters in roll forming a Effects of over-roll thickness on cone surface roughness in shear channel section, 383 spinning, | Influence of surface roughness on friction during metal forming Scandium processes, 9 Effect of Zr content and mechanical working on the structure and Surfaces and interfaces tensile properties of AA8090 alloy plates, 369 Process parameters selection for friction surfacing applications Severe plastic deformation using intelligent decision support, 27 Grain refinement, thermal stability and tensile properties of 2024 Synergy aluminum alloy after equal-channel angular pressing, 314 Synergistic effects of thermo-chemical treatment and super abrasive Shear force grinding in gears’ manufacturing, 249 Effects of over-roll thickness on cone surface roughness in shear spinning, | T6 heat treatment Shear spinning Data base construction on mechanical properties of thixoforged Effects of over-roll thickness on cone surface roughness in shear aluminum parts and their microstructure evaluation, 330 spinning, | Tapered-divided blank holder Shearing A novel process on friction aided deep drawing using tapered blank Orthotropic effect and strain dependency cf paperboard on load holder divided into four segments, 418 characteristic of center bevel cutter indented on paperboard, 199 Temperature distribution Sheet metal forming Numerical solutions of transient temperature and thermally induced A novel process on friction aided deep drawing using tapered blank stress distributions in a solid disk heated with radially periodic holder divided into four segments, 418 expanding and contracting ring heat flux, 99 Optimization of draw-in for an automotive sheet metal part. An Tensile properties evaluation using surrogate models and response surfaces, 426 Microstructure and tensile properties of a continuous-cast Al—Li- Silicon carbide Hf alloy, 164 On the possibility of obtaining silicon carbide using the glow- Grain refinement, thermal stability and tensile properties of 2024 discharge electron gun, 311 aluminum alloy after equal-channel angular pressing, 314 Simulation Effect of Zr content and mechanical working on the structure and Optimization of draw-in for an automotive sheet metal part. An tensile properties of AA8090 alloy plates, 369 evaluation using surrogate models and response surfaces, 426 Texturing Slate tiles New EDM polishing and texturing process with conductive poly- Drilling of slate tiles by CO; laser, 83 mer electrodes, 17 Space mapping Thermal modelling Optimization of draw-in for an automotive sheet metal part. An Thermal influence of cutting tool coatings, 119 evaluation using surrogate models and response surfaces, 426 Thermal stability Spinning Grain refinement, thermal stability and tensile properties of 2024 A study of the one-path deep drawing spinning of cups, 397 aluminum alloy after equal-channel angular pressing, 314 Splitting Thermal stress Work of fracture and of chips formation during linear cutting of Numerical solutions of transient temperature and thermally induced particle-board, 224 stress distributions in a solid disk heated with radially periodic Springback expanding and contracting ring heat flux, 99 Investigation of springback in high strength anisotropic steels, 91 Thermoplastic polymers Squeeze casting Laser cutting of different polymeric plastics (PE, PP and PC) by a Influence of initial stresses on the cast behaviour during squeeze CO, laser beam, 279 forming processes, 338 Thixoforging process Steel Data base construction on mechanical properties of thixoforged Surface hot-shortness of 1045 forging steel with residual copper, 169 aluminum parts and their microstructure evaluation, 330 Stellite-6 y-Titanium aluminide Mechanical and metallurgical properties of plasma sprayed and Parametric analysis and optimization of wire electrical discharge laser remelted Ni—20Cr and Stellite-6 coatings, 347 machining of y-titanium aluminide alloy, 286 Stereolithography Titanium dioxide On-line force monitoring of platform ascending rapid prototyping A study on usability of magnesium oxide with titanium dioxide in system, 257 PVC door and window profiles, 40 Strain dependency Tool breakage Orthotropic effect and strain dependency of paperboard on load Detecting tool breakage in turning aisi 1050 steel using coated and characteristic of center bevel cutter indented on paperboard, 199 uncoated cutting tools, 191 Strain path Tool condition monitoring Reversed straining in axisymmetric compression test, 62 Detecting tool breakage in turning aisi 1050 steel using coated and STS304 uncoated cutting tools, 191 Investigation on the variation of deep drawability of STS304 using Tool life FEM simulations, 389 Detecting tool breakage in turning ais: 1050 steel using coated and Surface integrity uncoated cutting tools, 191 Synergistic effects of thermo-chemical treatment and super abrasive Machinability of bimetallic bearings using cemented carbide tools: grinding in gears’ manufacturing, 249 evaluation of the wear mechanisms, 435 452 Subject Index of Volume 159 Tool steel molds UV radiation New EDM polishing and texturing process with conductive poly- A study on usability of magnesium oxide with titanium dioxide in mer electrodes, 17 PVC door and window profiles, 40 Torsion test Deformation processing map for control of CuSi3.9 silicon bronze Variable vertical section A technical note on the development of prototype CNC variable microstructure, 377 vertical section extrusion machine, 139 TRIP Investigation on the variation of deep drawability of STS304 using Wedge indentation FEM simulations, 389 Orthotropic effect and strain dependency of paperboard on load Truing and dressing characteristic of center bevel cutter indented on paperboard, 199 Loose abrasive truing and dressing of resin bond diamond cup WEDM wheels for grinding fibre optic connectors, 229 Parametric analysis and optimization of wire electrical discharge Tube hydroforming machining of y-titanium aluminide alloy, 286 An adaptive simulation approach designed for tube hydroforming Welding parameters processes, 303 An investigation into an intelligent system for predicting bead geometry in GMA welding process, 113 Ultrafine grit Wire offset Loose abrasive truing and dressing of resin bond diamond cup Parametric analysis and optimization of wire electrical discharge wheels for grinding fibre optic connectors, 229 machining of y-titanium aluminide alloy, 286