Journal of Materials Processing Technology Journal of Materials Processing Technology 147 (2004) 405-406 www.elsevier.com/locate/jmatprotec Author Index of Volume 147 Abdollah-Zadeh, A., 385 Hambli, R., 302 Ma, X., 217 Akkurt, A., 389 Hamdi, H., 277 Mahmudi, R., 185 Alsamhan, A., | Hartely, P., 1 Maiti, S.K., 321 Al-Samhan, A.M., 51 Hasan, M., 311 Marti, K., 204 Arif, A.F.M., 255 Hervy, L., 359 Martinez-Frias, J., 204 Asgari, S., 343 Hu, G., 229 Medina, E.A., 292 Hu, K., 236 Min, B.-K., 377 Bachir Bouiadjra, F.S., 23 Hugele, D., 155 Mitra, S., 241 Bachir Bouiadjra, N., 23 Mkadem, A., 302 Ballal, N.B., 131 Imaninejad, M., 247 Mohammadi, R., 185 Basu, R.N., 85 Ishikawa, T., 102 Murty, P., 121 Bauckhage, K., 174 Bayley, C.J., 28 Nageswara Rao, B., 94 Jacobson, M., 181 Bayraktar, E., 145, 155 Jaisingh, A., 321 Naji Meidani, A.R., 311 Benamara, Z., 23 Narasimhan, K., 321 James, R.D., 38 Benito, R., 204 Jamshidi, M.S., 385 Narayana Murty, S.V.S., 94 Bergheau, J.-M., 277 Jansen, J.P., 155 Ning, G., 167 Bernhart, G., 359 Joshi, S.S., 131 Bhattacharyya, B., 241 Joti, A., 23 Ojha, S.N., 174 Bouvard, D., 72 Ozturk, F., 397 Boyadjiev, [.I., 268, 370 Boyd, T., 204 Kang, C.G., 10, 45 Park, S.-J., 377 Kaplan, D., 155 Pillinger, I., | Cai, Q., 90 Kashyap, B.P., 94 Potiron, A., 302 Kaymaz, I., 60 Chen, C.C., 121 Chen, Y., 167 Keavey, M.A., 111 Ranatunga, V., 292 Khalid, F.A., 145 Rao, P.K., 131 Chen, Z.H., 286 Chowdhuri, S., 131 Khan, O., 255 Raoult, F., 23 Kim, H., 79 Raymond, S.D., 28 Dahlman, P., 181 Kim, K.-H., 191 Ren, X.J., 38 Darwish, S.M., 51 Kim, S.-Y., 211 Ribeiro, S., 336 Date, P.P., 321 Kim, T.-B., 191 Rosenband, V., 197 Kim, W.-B., 377 Delgado, A., 204 Desheng, S., 229 Kulekci, M.K., 389 Sadeler, R., 60 Di Marcello, E., 72 Kwak, J.-S., 65 Sarkar, S., 241 Du, Y., 328 Kwon, O.-Y., 191 Schneider, A., 174 Kwon, Y., 102 Seker, U., 389 El-Sayed, J., 79 Seo, P.K., 45 Ercan, F., 389 Lam, Y.C., 268, 370 Seo, Y.-J., 211 Lee, D., 397 Sepehrband, P., 185 Frutiger, R., 79 Lee, D.H., 45 Sharghi-Moshtaghin, Fu, Y., 229 Lee, J., 102 Sheikh, A.K., 255 Lee, S.-J., 377 Shi, Y., 328 Ganeshmurthy, N., 121 Lee, T.C., 286 Singh, U.P., 321 Gany, A., 197 Lee, W.-S., 211 Smith, L.M., 121 Garat, V., 359 Lee, Y., 102 Srivastava, V.C., 174 Gavgali, M., 60 Levaillant, C., 145 Stéver, D., 85 Grandhi, R.V., 217 Li, F., 236 Sturm, R., 351 Grum, J., 351 Li, J., 236, 328 Subhash, G., 247 Guan, Q., 328 Lim, T., 121 Sun, J., 229 Gunnberg, F., 181 Liu, W., 167 Sun, Y., 328 Guo, D., 328 Loukus, A., 247 Lu, F., 90 Taguchi, S.P., 336 Ha, M.-K., 65 Lu, L., 90 Tan, M.J., 139, 163 Hadavi, S.M.M., 385 Lu, S.-P., 191 Tang, C.Y., 286 Elsevier B.V. doi: 10.1016/S0924-0 1 36(04)00283-3 406 Author Index of Volume 147 Tao, J., 111 Wang, L., 38 Youn, S.W., 10 Tenaud, Ph., 72 Wang, Z., 90 Thiruvarudchelvan, S., 139, 163 Wessel, E., 85 Zahouani, H., 277 Thomson, P.F., 268, 370 Wild, P.M., 28 Zhang, J., 229 Tietz, F., 85 Wilson, G., 204 Zhang, Z., 90 Totik, Y., 60 Wu, J., 229 Zhao, G., 217 Toussaint, F., 72 Yang, L., 167 Zhao, X., 217 Uhlenwinkel, V., 174 Yang, Q.X., 38 Zhong, M., 167 Journal of Materials Processing Technology Journal of Materials Processing Technology 147 (2004) 407-412 www.elsevier.com/locate/jmatprotec Subject Index of Volume 147 Y Burst pressure The influence of thermal exposure on the y’ precipitates character- Finite element modeling of the tubular hydroforming process. istics and tensile behavior of superalloy IN-738LC, 343 Part 1. Strain rate-independent material model assumption, AA6082 tubes 121 Experimental and numerical investigation of free-bulge formation during hydroforming of aluminum extrusions, 247 Ceramics ABAQUS The effects of shock activation on sintering Si;N, ceramics, 90 Analysis of forming limits using ductile fracture criteria, 397 Charpy toughness test Abrasive waterjet applications Evaluation of pipeline laser girth weld properties by Charpy (V) Effect of feed rate on surface roughness in abrasive waterjet cutting toughness and impact tensile tests, 155 applications, 389 Chemical composition Acoustic emission signals Analysis and chemical composition of larnite-rich ultrarefractory Neural network approach for diagnosis of grinding operation by materials, 204 acoustic emission and power signals, 65 Chemical vapor deposition (CVD) Aging Prevention of plasma-induced damage during HDP-CVD deposi- The influence of thermal exposure on the y’ precipitates character- tion, 211 istics and tensile behavior of superalloy IN-738LC, 343 Chip formation Air bending Machining aspects of a high carbon Fe;Al alloy, 131 Finite element damage modeling in bending processes, 302 Closed-die forging Al A volume-based mapping method for parameter estimation in Preparation of Ni/Al,O; nanocomposite powder by high-energy multi-stage material processing, 292 ball milling and subsequent heat treatment, 236 Cold deformation AIN ceramics The effect of homogenisation treatment on cold deformations of AA Activation of combustion synthesis of aluminum nitride powder, 2014 and AA 6063 alloys, 60 197 Cold forging AIO; Modeling approach to estimate the elastic characteristics of work- Preparation of Ni/AIl,O; nanocomposite powder by high-energy piece and shrink-fitted die for cold forging, 102 ball milling and subsequent heat treatment, 236 Cold rolling Aluminum alloy Roll deformation and stress distribution under thermo-mechanical The effect of homogenisation treatment on cold deformations of AA loading in cold rolling, 255 2014 and AA 6063 alloys, 60 Cold workability Determination of tearing energy from uniaxial tension tests of Improved ductile fracture criterion for cold forming of spheroidised aluminum alloy sheet, 185 steel, 94 Anisotropic shrinkage Collars Experimental and numerical analysis of the deformation of ferrite Collar drawing using a urethane pad, 139 segments during sintering, 72 Collimation component Laser direct manufacturing of tungsten nickel collimation compo- Ball-on-disk wear nent, 167 Microstructure and wear property of Fe-Mn—Cr—Mo-V alloy clad- Composite powder ding by submerged arc welding, 191 Preparation of Ni/Al,O; nanocomposite powder by high-energy Beams ball milling and subsequent heat treatment, 236 Prediction of the deflection and residual stress in controlled Computation cooling of hot-rolled steel beams including load and arbitrary Prediction of the deflection and residual stress in controlled cooling support. Part II. Experimental validation and application, of hot-rolled steel beams including load and arbitrary support. 268 Part I. Computational model, 370 Prediction of the deflection and residual stress in controlled cooling Convergence analysis of hot-rolled steel beams including load and arbitrary support. Finite element modeling of the tubular hydroforming process. Part Part I. Computational model, 370 1. Strain rate-independent material model assumption, 121 Bubble dynamics CRF A study of hydrogen bubble growth during ultrasonic degassing of The development of real time re-meshing technique for simulating Al-Cu alloy melts, 311 cold-roll-forming using FE methods, | Burr height Cu-Ni-Si Alloy Mathematical modeling for controlled electrochemical deburring Age-hardening characteristics of Cu-2.4Ni-0.6Si alloy produced (ECD), 241 by the spray forming process, 174 Elsevier B.V. doi: 10.1016/S0924-0136(04)00284-5 408 Subject Index of Volume 147 Cup wall Electromagnetic stirring The drawing of conical cups using an annular urethane pad, 163 Mechanical properties of particulate reinforced metal matrix com- Cutting depth posites by electromagnetic and mechanical stirring and reheat- The influence of rake angle, cutting feed and cutting depth on ing process for thixoforming, 10 residual stresses in hard turning, 181 FEM Cutting feed Modeling approach to estimate the elastic characteristics of work- The influence of rake angle, cutting feed and cutting depth on piece and shrink-fitted die for cold forging, 102 residual stresses in hard turning, 181 FEM analysis Cutting temperature Sensitivity analysis of a deep drawing process for miniaturized Cutting temperatures in hard turning chromium hardfacings with products, 321 PCBN tooling, 38 Ferrite Experimental and numerical analysis of the deformation of ferrite Damage modeling segments during sintering, 72 Finite element damage modeling in bending processes, 302 Finite element Deburring The development of real time re-meshing technique for simulating Mathematical modeling for controlled electrochemical deburring cold-roll-forming using FE methods, | (ECD), 241 Peel and shear strength of spot-welded and weld-bonded dissimilar Deep drawing process thickness joints, 51 Sensitivity analysis of a deep drawing process for miniaturized Finite element simulation for superplastic forming using a non- products, 321 Newtonian viscous thick section element, 111 Deflection Finite element modeling of the tubular hydroforming process. Part Prediction of the deflection and residual stress in controlled cooling 1. Strain rate-independent material model assumption, 121 of hot-rolled steel beams including load and arbitrary support. Experimental and numerical investigation of free-bulge formation Part II. Experimental validation and application, 268 during hydroforming of aluminum extrusions, 247 Prediction of the deflection and residual stress in controlled cooling Finite element damage modeling in bending processes, 302 of hot-rolled steel beams including load and arbitrary support. Analysis of forming limits using ductile fracture criteria, 397 Part I. Computational model, 370 Finite element analysis Deformation behaviour On modeling of the weld line in finite element analyses of tailor- Deformation and fracture behaviour of high manganese austenitic welded blank forming operations, 28 steel, 145 Cutting temperatures in hard turning chromium hardfacings with Diagnosis of grinding operation PCBN tooling, 38 Neural network approach for diagnosis of grinding operation by Plane strain formability analysis of automotive body structures acoustic emission and power signals, 65 using DYNA2D, 79 Die design Finite element method Influence of design and process parameters on service life of nut hot Studies on characteristics of temperature field during GTAW with a forging die, 359 trailing heat sink for titanium sheet, 328 Dielectrophoresis Flange Surface finishing technique for small parts using dielectrophoretic Collar drawing using a urethane pad, 139 effects of abrasive particles, 377 Forging process Dilatometry Studies on optimization of metal forming processes using sensi- Experimental and numerical analysis of the deformation of ferrite tivity analysis methods, 217 segments during sintering, 72 Formability evaluation technique Dislocations Plane strain formability analysis of automotive body structures The effects of shock activation on sintering Si,;N, ceramics, 90 using DYNA2D, 79 Dissimilar thickness Forming limit diagram Peel and shear strength of spot-welded and weld-bonded dissimilar Analysis of forming limits using ductile fracture criteria, 397 thickness joints, 51 Forming limits Ductile fracture criteria Experimental and numerical investigation of free-bulge formation Improved ductile fracture criterion for cold forming of spheroidised during hydroforming of aluminum extrusions, 247 steel, 94 Forming process sensitivity Analysis of forming limits using ductile fracture criteria, 397 Sensitivity analysis of a deep drawing process for miniaturized DYNA2D products, 321 Plane strain formability analysis of automotive body structures Fracture using DYNA2D, 79 Deformation and fracture behaviour of high manganese austenitic steel, 145 Effective failure strain Free surface Improved ductile fracture criterion for cold forming of spheroidised Die design by filling analysis of semi-solid injection forging steel, 94 process and their experimental investigation, 45 Elastic deformation Friction-actuated blank-holding technique Modeling approach to estimate the elastic characteristics of work- The drawing of conical cups using an annular urethane pad, 163 piece and shrink-fitted die for cold forging, 102 Fuel cells Electrical conductivity Interface reactions during co-firing of solid oxide fuel cell compo- Age-hardening characteristics of Cu-2.4Ni-0.6Si alloy produced nents, 85 by the spray forming process, 174 Electrochemical deburring Gassy liquid Mathematical modeling for controlled electrochemical deburring A study of hydrogen bubble growth during ultrasonic degassing of (ECD), 241 Al-Cu alloy melts, 311 Subject Index of Volume 147 Gating system Ladding Die design by filling analysis of semi-solid injection forging Microstructure and wear property of Fe-Mn-—Cr—Mo-V alloy clad- process and their experimental investigation, 45 ding by submerged arc welding, 191 Grinding process Larnite Residual stresses computation in a grinding process, 277 Analysis and chemical composition of larnite-rich ultrarefractory GTAW materials, 204 Studies on characteristics of temperature field during GTAW with a Laser direct manufacturing trailing heat sink for titanium sheet, 328 Laser direct manufacturing of tungsten nickel collimation compo- nent, 167 Hard chromium electroplating Laser surface remelting The effect of thermal fatigue on the hardness of hard chromium A new experimental technique for measuring strain and residual electroplatings, 385 stresses during a laser remelting proce Hard turning Laser welding Cutting temperatures in hard turning chromium hardfacings with Evaluation of pipeline laser girth weld properties by Charpy (V) PCBN tooling, 38 toughness and impact tensile tests, 155 The influence of rake angle, cutting feed and cutting depth on Light alloy residual stresses in hard turning, 181 A study of hydrogen bubble growth during ultrasonic degassing of Hardfacing Al-Cu alloy melts, 311 Cutting temperatures in hard turning chromium hardfacings with Low and high contraction chromium PCBN tooling, 38 The effect of thermal fatigue on the hardness of hard chromium Hardness electroplatings, 385 The effect of thermal fatigue on the hardness of hard chromium LPCVD electroplatings, 385 Study of the breakdown voltage in lateral polysilicon N*P junctions, HAZ 23 Evaluation of pipeline laser girth weld properties by Charpy (V) toughness and impact tensile tests, 155 Machining Heat sink Machining aspects of a high carbon Fe;Al alloy, 131 Studies on characteristics of temperature field during GTAW with a Maslennikov’s technique trailing heat sink for titanium sheet, 328 Collar drawing using a urethane pad, 139 Heat treatment Material processing Preparation of Ni/Al,O; nanocomposite powder by high-energy A volume-based mapping method for parameter estimation in ball milling and subsequent heat treatment, 236 multi-stage material processing, 292 High-density plasma (HDP) Material properties Prevention of plasma-induced damage during HDP—CVD deposi- Experimental and numerical investigation of free-bulge formation tion, 211 during hydroforming of aluminum extrusions, 247 High-energy ball milling Mean stress Preparation of Ni/AI,O; nanocomposite powder by high-energy Improved ductile fracture criterion for cold forming of spheroidised ball milling and subsequent heat treatment, 236 steel, 94 Homogenisation treatments Measurement The effect of homogenisation treatment on cold deformations of AA Prediction of the deflection and residual stress in controlled cooling 2014 and AA 6063 alloys, 60 of hot-rolled steel beams including load and arbitrary support. Hot-rolling Part Il. Experimental validation and application, 268 Prediction of the deflection and residual stress in controlled Mechanical milling cooling of hot-rolled steel beams including load and arbitrary Effect of different processing on the microstructure and mechanical support. Part II. Experimental validation and application, properties of Alg7MngTi2,Nb, alloy, 229 268 Mechanical properties Prediction of the deflection and residual stress in controlled cooling The effects of shock activation on sintering Si,;N, ceramics, 90 of hot-rolled steel beams including load and arbitrary support. Metal forming Part I. Computational model, 370 Improved ductile fracture criterion for cold forming of spheroidised Hydro abrasive machining steel, 94 Effect of feed rate on surface roughness in abrasive waterjet cutting Metallurgical phenomena applications, 389 Residual stresses computation in a grinding process, 277 Hydroforming Meteorite Experimental and numerical investigation of free-bulge formation Analysis and chemical composition of larnite-rich ultrarefractory during hydroforming of aluminum extrusions, 247 materials, 204 Hydrogen bubble Microstructural changes A study of hydrogen bubble growth during ultrasonic degassing of The drawing of conical cups using an annular urethane pad, 163 Al-Cu alloy melts, 311 Microstructural features Age-hardening characteristics of Cu-2.4Ni-0.6Si alloy produced Impact tensile testing by the spray forming process, 174 Evaluation of pipeline laser girth weld properties by Charpy (V) Microstructure toughness and impact tensile tests, 155 Deformation and fracture behaviour of high manganese austenitic Inductively coupled plasma (ICP) steel, 145 Prevention of plasma-induced damage during HDP-CVD deposi- Microstructure and wear property of Fe-Mn—Cr—Mo-V alloy clad- tion, 211 ding by submerged arc welding, 191 Iron aluminides Effect of different processing on the microstructure and mechanical Machining aspects of a high carbon Fe3Al alloy, 131 properties of Alg7MngTi2,Nb, alloy, 229 410 Subject Index of Volume 147 A new experimental technique for measuring strain and residual Preform design stresses during a laser remelting process, 351 Studies on optimization of metal forming processes using sensi- Mixed element tivity analysis methods, 217 Simulation of strain localization in metal forming processes using bilinear mixed u/p elements, 286 Rake angle The influence of rake angie, cutting feed and cutting depth on residual stresses in hard turning, 181 Neural network Rectified diffusion Neural network approach for diagnosis of grinding operation by A study of hydrogen bubble growth during ultrasonic degassing of acoustic emission and power signals, 65 Al-Cu alloy melts, 311 Ni Reheating Preparation of Ni/Al,O3; nanocomposite powder by high-energy Mechanical properties of particulate reinforced metal matrix com- ball milling and subsequent heat treatment, 236 posites by electromagnetic and mechanical stirring and reheat- 32NiCrMol145 steel ing process for thixoforming, 10 The effect of thermal fatigue on the hardness of hard chromium Re-meshing electroplatings, 385 The development of real time re-meshing technique for simulating Non-uniform electric field cold-roll-forming using FE methods, | Surface finishing technique for small parts using dielectrophoretic Remote thermocouple effects of abrasive particles, 377 Cutting temperatures in hard turning chromium hardfacings with Numerical simulation PCBN tooling, 38 Experimental and numerical analysis of the deformation of ferrite Residual stress segments during sintering, 72 The influence of rake angle, cutting feed and cutting depth on Residual stresses computation in a grinding process, 277 residual stresses in hard turning, 181 Influence of design and process parameters on service life of nut hot Prediction of the deflection and residual stress in controlled cooling forging die, 359 of hot-rolled steel beams including load and arbitrary support. Nut hot forging Part II. Experimental validation and application, 268 Influence of design and process parameters on service life of nut hot Residual stresses computation in a grinding process, 277 forging die, 359 A new experimental technique for measuring strain and residual stresses during a laser remelting process, 351 Optimization Prediction of the deflection and residual stress in controlled cooling Studies on optimization of metal forming processes using sensi- of hot-rolled steel beams including load and arbitrary support. tivity analysis methods, 217 Part I. Computational model, 370 Out-of-plane Rheology flow model Analysis of forming limits using ductile fracture criteria, 397 Die design by filling analysis of semi-solid injection forging Oxidation process and their experimental investigation, 45 Silicon nitride oxidation behaviour at 1000 and 1200 °C, 336 Roll deformation Roll deformation and stress distribution under thermo-mechanical Particle electromechanics loading in cold rolling, 255 Surface finishing technique for small parts using dielectrophoretic Roll pressure effects of abrasive particles, 377 Roll deformation and stress distribution under thermo-mechanical PCBN loading in cold rolling, 255 Cutting temperatures in hard turning chromium hardfacings with Roll stress PCBN tooling, 38 Roll deformation and stress distribution under thermo-mechanical Pipeline steel loading in cold rolling, 255 Evaluation of pipeline laser girth weld properties by Charpy (V) Roll temperature toughness and impact tensile tests, 155 Roll deformation and stress distribution under thermo-mechanical Plasma-induced damage loading in cold rolling, 255 Prevention of plasma-induced damage during HDP—CVD deposi- tion, 211 Self-propagating high-temperature synthesis Polarization Activation of combustion synthesis of aluminum nitride powder, Surface finishing technique for small parts using dielectrophoretic 197 effects of abrasive particles, 377 Semi-solid injection forging Polysilicon films Die design by filling analysis of semi-solid injection forging Study of the breakdown voltage in lateral polysilicon N*P junctions, process and their experimental investigation, 45 23 Sensitivity analysis Polysilicon N*P junctions Finite element modeling of the tubular hydroforming process. Part Study of the breakdown voltage in lateral polysilicon N*P junctions, 1. Strain rate-independent material model assumption, 121 23 Studies on optimization of metal forming processes using sensi- Porosity tivity analysis methods, 217 Interface reactions during co-firing of solid oxide fuel cell compo- Shell elements nents, 85 Finite element simulation for superplastic forming using a non- Power signals Newtonian viscous thick section element, 111 Neural network approach for diagnosis of grinding operation by Shock activation acoustic emission and power signals, 65 The effects of shock activation on sintering Si;N, ceramics, 90 Precipitation Shrink fitting Age-hardening characteristics of Cu-2.4Ni—0.6Si alloy produced Modeling approach to estimate the elastic characteristics of work- by the spray forming process, 174 piece and shrink-fitted die for cold forging, 102 Subject Index of Volume 147 Influence of design and process parameters on service life of nut hot Surface finishing process forging die, 359 Surface finishing technique for small parts using dielectrophoretic Silicon nitride effects of abrasive particles, 377 The effects of shock activation on sintering Si3;N, ceramics, 90 Suspension Silicon nitride oxidation behaviour at 1000 and 1200 °C, 336 Interface reactions during co-firing of solid oxide fuel cell compo- Simulation nents, 85 Finite element simulation for superplastic forming using a non- Newtonian viscous thick section element, 111 Tailor-welded blank forming test Finite element modeling of the tubular hydroforming process. Part On modeling of the weld line in finite element analyses of tailor- 1. Strain rate-independent material model assumption, 121 welded blank forming operations, 28 Sintering Tearing energy Experimental and numerical analysis of the deformation of ferrite Determination of tearing energy from uniaxial tension tests of segments during sintering, 72 aluminum alloy sheet, 185 Interface reactions during co-firing of solid oxide fuel cell compo- Temperature field nents, 85 Studies on characteristics of temperature field during GTAW with a Silicon nitride oxidation behaviour at 1000 and 1200 °C, 336 trailing heat sink for titanium sheet, 328 Solid fraction Tensile test Mechanical properties of particulate reinforced metal matrix com- Determination of tearing energy from uniaxial tension tests of posites by electromagnetic and mechanical stirring and reheat- aluminum alloy sheet, 185 ing process for thixoforming, 10 Thermal aspects Solidification Residual stresses computation in a grinding process, 277 Die design by filling analysis of semi-solid injection forging Thermal cycles process and their experimental investigation, 45 The effect of thermal fatigue on the hardness of hard chromium Spheroidised steel electroplatings, 385 Improved ductile fracture criterion for cold forming of spheroidised Thermal fatigue steel, 94 The effect of thermal fatigue on the hardness of hard chromium Spot welding electroplatings, 385 Peel and shear strength of spot-welded and weld-bonded dissimilar Thermo-mechanical load thickness joints, 51 Roll deformation and stress distribution under thermo-mechanical Spray forming loading in cold rolling, 255 Age-hardening characteristics of Cu-2.4Ni—0.6Si alloy produced Thickness thinning by the spray forming process, 174 Analysis of forming limits using ductile fracture criteria, 397 Effect of different processing on the microstructure and mechanical Thixoforming properties of Alg7MngTi.,Nb, alloy, 229 Mechanical properties of particulate reinforced metal matrix com- Standards posites by electromagnetic and mechanical stirring and reheat- Analysis and chemical composition of larnite-rich ultrarefractory ing process for thixoforming, 10 materials, 204 Three step reheating Stoody alloy Die design by filling analysis of semi-solid injection forging Microstructure and wear property of Fe-Mn—Cr—Mo-V alloy clad- process and their experimental investigation, 45 ding by submerged arc welding, 191 Titanium alloy Strain Studies on characteristics of temperature field during GTAW with a A new experimental technique for measuring strain and residual trailing heat sink for titanium sheet, 328 stresses during a laser remelting proces Tool Strain gage Modeling approach to estimate the elastic characteristics of work- Modeling approach to estimate the elastic characteristics of work- piece and shrink-fitted die for cold forging, 102 piece and shrink-fitted die for cold forging, 102 Tool-life testing Strain hardening Machining aspects of a high carbon Fe;Al alloy, 131 Deformation and fracture behaviour of high manganese austenitic Trialuminides steel, 145 Effect of different processing on the microstructure and mechanical Strain localization properties of Alg7MngTi2,Nb, alloy, 229 Simulation of strain localization in metal forming processes using Truesdell stress rate bilinear mixed u/p elements, 286 Simulation of strain localization in metal forming processes using Strain rate bilinear mixed u/p elements, 286 Finite element modeling of the tubular hydroforming process. Part Tubular hydroforming 1. Strain rate-independent material model assumption, 121 Finite element modeling of the tubular hydroforming process. Part Strain rate and temperature 1. Strain rate-independent material model assumption, 121 Deformation and fracture behaviour of high manganese austenitic Twins and dislocations steel, 145 Deformation and fracture behaviour of high manganese austenitic Stress concentration steel, 145 Peel and shear strength of spot-welded and weld-bonded dissimilar thickness joints, 51 Ultrasonic degassing Superalloy IN-738LC A study of hydrogen bubble growth during ultrasonic degassing of The influence of thermal exposure on the y’ precipitates character- Al-Cu alloy melts, 3i1 istics and tensile behavior of superalloy IN-738LC, 343 Superplastic forming Viscous flow Finite element simulation for superplastic forming using a non- Finite element simulation for superplastic forming using a non- Newtonian viscous thick section element, 111 Newtonian viscous thick section element, 111 412 Subject Index of Volume 147 Volume mapping WZ A volume-based mapping method for parameter estimation in Evaluation of pipeline laser girth weld properties by Charpy (V) multi-stage material processing, 292 toughness and impact tensile tests, 155 WINi alloy X-ray fluorescence Laser direct manufacturing of tungsten nickel collimation compo- Analysis and chemical composition of larnite-rich ultrarefractory nent, 167 materials, 204 Waterjet technology Effect of feed rate on surface roughness in abrasive waterjet cutting Yield stress applications, 389 The influence of thermal exposure on the y’ precipitates character- Weld property istics and tensile behavior of superalloy IN-738LC, 343 On modeling of the weld line in finite element analyses of tailor- YSZ (yttria stabilized zirconia) welded blank forming operations, 28 Interface reactions during co-firing of solid oxide fuel cell compo- Weld-bonding nents, 85 Peel and shear strength of spot-welded and weld-bonded dissimilar Yttrium disilicate thickness joints, 51 Silicon nitride oxidation behaviour at 1000 and 1200 °C, 336 v9