Journalo f Materials Processing Technology Journal of Materials Processing Technology 133 (2003) 398 www.elsevier.com/locate/jmatprotec Author Index of Volume 133 Adamcezyk, Z., 7 Haga, T., 103 Ridgway, J.S., 181 Adamiak, M., 50 Hamrol, A., 21 Robert, M.H., 149 Al-Jarrah, M., 266 Herzog, R., 218 Al-Wedyan, H., 266 Hu, W., 108 Sali, S., 134 Arrieux, R., 79 Hull, J.B., 122, 181 Sathiyakumar, M., 282 Savas, M.A., 297 Balendran, V., 26 Jaworska, L., 118 Sekhon, G.S., 243 Balic, J., 13 Jeffries, M., 122 Seong, S.H., 322 Balic, J., 71, 128 Jonezyk, D., 7 Shi, J., 297 Bao, L., 287 Si, H.-M., 311 Barbacki, A., 21 Kampus, Z., 128 Sieniawski, J., 84 Bardell, R., 26 Kawalec, M., 21 Siminkova, S., 189 Bartsch, M., 218 Knosala, R., 90 Sivayoganathan, K., 26 Baszun, M., 34 Kog, M., 276 Smith, R.W., 297 Bednarczyk, J., 340 Kociotek, K., 7 Smuk, B., 195 Blahova, O., 189 Kopac, J., 134 Sricharoenchai, P., 236 Kridli, G.T., 287 Sripinproach, D., 236 Chappuis, C., 79 Krolicka, B., 118 Stanciu, V., 44 Cho, C., 311 Kubiak, K., 84 Starr, A.G., 108 Chow, C.L., 304 Kuzman, K., 166 Stefanescu, D., 44 Courvoisier, L., 359 Kvackaj, T., 236 Stépanek, I., 189 CuS, F., 158 Kwahk, S.-Y., 311 Suban, M., 207 Cus, F., 214 Suzuki, S., 103 Cwajna, J., 39 La, &., 122 Swider, P., 174 Czyrska-Filemonowicz, A., 218 Lee, FG., 322 Szala, J., 39 Lenkey, Gy.B., 143 Szutkowska, M., 195 da Costa, C.E., 203 Leung, A.Y.T., 108 David, E., 44 Lévay, I., 143 Tabourot, L., 79 Dobrzanski, L.A., 1, 3, 5, 50 Li, E.B., 348 Tian, Y., 287 DolinSek, S., 63 Tieu, A.K., 348 Domzalicki, P., 230 Mackerle, J., 378 Tomov, B., 199 DrstvenSek, I., 71 Major, Z., 143 Torralba, J.M., 203 Dumoulin, S., 79 Malec, M., 225 Toth, L., 143 Dweiri, F., 266 Mallick, P.K., 287 TuSek, J., 207 Margarido, M., 149 Ferron, G., 359 Martiny, M., 359 Vacher, P., 79 Filip, R., 84 Meola, C., 353 Velasco, F., 203 Messerschmidt, U., 218 Vrecer, G., 214 Gafur, M.A., 257 Minev, R., 199 Gagov, V., 199 Mursec, B., 158 Walter, J., 195 Gentle, C.R., 181 Wang, J., 371 Gibas, T., 118 Narayan Prabhu, K., 257 Wasilkowska, A., 218 Giorleo, L., 353 Nasrul Haque, M., 257 Wiedermann, J., 225 Gnanam, F.D., 282 Nastran, M., 166 Wyczesany, A., 118 Grabowik, C., 90 Nele, L., 353 Gronostajski, J., 99 Nishiyama, T., 103 Gronostajski, Z., 99 Nowacki, J., 174 Yang, X.J., 304 Grzeda, D., 34 Yuen, W.Y.D., 348 Guo, D.M., 371 Pahole, I., 13 Gupta, N.K., 243 Zalecki, W., 225 Gupta, P.K., 243 Radev, R., 199 Ziaja, W., 84 Rajchel, B., 118 Zielinski, A., 230 Ha, M.Y., 322 Richter, J., 39 Zrnik, J., 236 Elsevier Science B.V. PII: S0924-0136(03)00007-4 Journal of Materials Processing Technology R Journal of Materials Processing Technology 133 (2003) 399-404 www.elsevier.com/locate/jmatprotec Subject Index of Volume 133 Abrasive waterjet cutting CAD/CAM The cutting performance in multipass abrasive waterjet machining A new approach to a CAD/CAM system as a part of distributed of industrial ceramics, 371 environment: Intranet database, 7 Accuracy CAGD Some comments on cold forming process stability analysis, 166 Accuracy analysis of 3D data collection and free-form modelling Acoustic properties methods, 26 Wood: an important material in manufacturing technology, 134 CAPP Adhesion The method of knowledge representation for a CAPP system, 90 Structure and properties of the TiN and Ti(C,N) coatings deposited Carbide particles in the PVD process on high-speed steels, 50 Economical non-ledeburitic tool alloys—alloying philosophy, Adhesive behavior structure and properties, 39 Mechanical properties of thin film—substrate systems, 189 Carbon molecular sieves AL2008-T4 Composites obtained from carbon molecular sieves and copper Prediction of forming limit diagram with mixed anisotropic kine- oxide, 44 matic—isotropic hardening plastic constitutive model based on Casting process stress criteria, 304 A hybrid method for casting process simulation by combining FDM Alumic-79 and FEM with an efficient data conversion algorithm, 311 Fuzzy surface roughness modeling of CNC down milling of Casting/chill interface Alumic-79, 266 Effect of chill thickness and superheat on casting/chill interfacial Alumina heat transfer during solidification of commercially pure alumi- A PRIME approach for the moulding of conduit ceramic parts, 181 nium, 257 Influence of additives on density, microstructure and mechanical Cathodic protection properties of alumina, 282 Hydrogen degradation of high-strength low-alloyed steels, 230 Aluminium alloys Centrifugal compressor impeller Influence of thermomechanical treatments on the production of Producibility of brazed high-dimension centrifugal compressor rheocast slurries by partial melting, 149 impellers, 174 Aluminum Ceramic processing P/M aluminum matrix composites: an overview, 203 A PRIME approach for the moulding of conduit ceramic parts, 181 Analytical model Ceramic tool material Analytical modelling of drawbeads in sheet metal forming, 359 Alumina ceramics with partially stabilized zirconia for cutting ANFIS tools, 195 Fuzzy surface roughness modeling of CNC down milling of Chill thickness Alumic-79, 266 Effect of chill thickness and superheat on casting/chill interfacial Anisotropic kinematic hardening heat transfer during solidification of commercially pure alumi- Prediction of forming limit diagram with mixed anisotropic kine- nium, 257 matic—isotropic hardening plastic constitutive model based on CIM stress criteria, 304 Responding ability in dynamic production circumstances, 71 Austenite conditioning Planning of tool supply to a group of machines, 214 Influence of plastic deformation conditions on structure evolution CMM in Nb—Ti microalloyed steel, 236 Accuracy analysis of 3D data collection and free-form modelling Austenitic stainless steels methods, 26 Work-hardening in the drilling of austenitic stainless steels, 63 CNC Axisymmetric deformation Fuzzy surface roughness modeling of CNC down milling of Alu- An analysis of external inversion of round tubes, 243 mic-79, 266 Cold and hot isostatic pressing Bibliography Finite element analysis and simulation of powder materials, metal- Finite element analysis and simulation of powder materials, metal- lurgical processes and products. A bibliography (1985-2000), lurgical processes and products. A bibliography (1985-2000), 378 378 Binder Cold flat forging A PRIME approach for the moulding of conduit ceramic parts, 181 Some comments on cold forming process stability analysis, 166 Cold rolling CAD Forward slip measurements in cold rolling by laser Doppler Accuracy analysis of 3D data collection and free-form modelling velocimetry: uncertainty analysis and accuracy improvement, methods, 26 348 Elsevier Science B.V. PII: S0924-0136(03)00008-6 400 Subject Index of Volume 133 Colloidal processing Diamond compacts Influence of additives on density, microstructure and mechanical Study on interactions in diamond—ceramic material systems, 118 properties of alumina, 282 Down milling Compaction Fuzzy surface roughness modeling of CNC down milling of Finite element analysis and simulation of powder materials, metal- Alumic-79, 266 lurgical processes and products. A bibliography (1985-2000), Drawbeads 378 Analytical modelling of drawbeads in sheet metal forming, 359 Component architecture Drilling A new approach to a CAD/CAM system as a part of distributed Work-hardening in the drilling of austenitic stainless steels, 63 environment: Intranet database, 7 Composites Economical Composites obtained from carbon molecular sieves and copper Economical non-ledeburitic tool alloys—alloying philosophy, oxide, 44 structure and properties, 39 Compression Electromagnetic brake Creep mechanisms of ferritic oxide dispersion strengthened alloys, Numerical simulation of three-dimensional flow, heat transfer, and 218 solidification of steel in continuous casting mold with electro- Constitutive modeling magnetic brake, 322 Prediction of forming limit diagram with mixed anisotropic kine- Electromagnetic field matic—isotropic hardening plastic constitutive model based on Numerical simulation of three-dimensional flow, heat transfer, and stress criteria, 304 solidification of steel in continuous casting mold with electro- Continuity magnetic brake, 322 Accuracy analysis of 3D data collection and free-form modelling Engine components methods, 26 Influence of additives on density, microstructure and mechanical Continuous casting properties of alumina, 282 Strip casting of A5182 alloy using a melt drag twin-roll caster, 103 Erosion wear Numerical simulation of three-dimensional flow, heat transfer, and Structure and properties of the TiN and Ti(C,N) coatings deposited solidification of steel in continuous casting mold with electro- in the PVD process on high-speed steels, 50 magnetic brake, 322 Experiments Controlled rolling Deep drawing of tailored blanks without a blankholder, 128 Influence of plastic deformation conditions on structure evolution Expert systems in Nb-Ti microalloyed steel, 236 The method of knowledge representation for a CAPP system, 90 Copper Extensometer Composites obtained from carbon molecular sieves and copper Determination of the equivalent stress—equivalent strain relation- oxide, 44 ship of a copper sample under tensile loading, 79 Corner filling External inversion Investigation of thickness variation and corner filling in tube An analysis of external inversion of round tubes, 243 hydroforming, 287 Creep Fault diagnosis Creep mechanisms of ferritic oxide dispersion strengthened alloys, Operational fault diagnosis of manufacturing systems, 108 218 Fault tree analysis Criterion Operational fault diagnosis of manufacturing systems, 108 Sintering criterion in metal working processes, 99 FEA Cross-linking Investigation of the effect of loading path and variation in material Technological characterisation of thermoshrinking cross-linked properties on robustness of the tube hydroforming process, 276 polyethylene by destructive and non-destructive techniques, 353 FEM Cutting conditions Deep drawing of tailored blanks without a blankholder, 128 Integral model of selection of optimal cutting conditions from Ferrite grain size different databases of tool makers, 158 Influence of plastic deformation conditions on structure evolution Cutting performance in Nb-Ti microalloyed steel, 236 The cutting performance in multipass abrasive waterjet machining Ferritic steels of industrial ceramics, 371 The influence of nitrogen on the structure and properties of Fe— Cutting tool flows 10Cr—N and Fe—10Cr—1Mo-N steels after tempering in the Planning of tool supply to a group of machines, 214 temperature range of 650-750 °C, 225 Cyanoacrylate Finite difference method A PRIME approach for the moulding of conduit ceramic parts, 181 A hybrid method for casting process simulation by combining FDM and FEM with an efficient data conversion algorithm, Data flow matrix 311 Optimisation of intelligent FMS using the data flow matrix method, Finite element method 13 A hybrid method for casting process simulation by combining Database FDM and FEM with an efficient data conversion algorithm, Integral model of selection of optimal cutting conditions from 311 different databases of tool makers, 158 Finite element analysis and simulation of powder materials, metal- Deep drawing lurgical processes and products. A bibliography (1985-2000), Deep drawing of tailored blanks without a blankholder, 128 378 Deposition rate Finite element modeling High-productivity multiple-wire submerged-are welding and clad- Investigation of thickness variation and corner filling in tube ding with metal-powder addition, 207 hydroforming, 287 Subject Index of Volume 133 Finite element simulation Hydrogen About input data selection for the FEM analysis of bulk forming, Hydrogen degradation of high-strength low-alloyed steels, 230 199 Finite elements Image analysis Determination of the equivalent stress—equivalent strain relation- Determination of the equivalent stress—equivalent strain relation- ship of a copper sample under tensile loading, 79 ship of a copper sample under tensile loading, 79 FLD In situ straining Prediction of forming limit diagram with mixed anisotropic kine- Creep mechanisms of ferritic oxide dispersion strengthened alloys, matic—isotropic hardening plastic constitutive model based on 218 stress criteria, 304 Incoloy MA956 Flexible manufacturing systems Creep mechanisms of ferritic oxide dispersion strengthened alloys, Optimisation of intelligent FMS using the data flow matrix method, 218 13 Inductors Flexible production Distributions of forces in the inductors used in metal processing in Planning of tool supply to a group of machines, 214 the pulse magnetic field, 340 Flow stress Input data selection About input data selection for the FEM analysis of bulk forming, About input data selection for the FEM analysis of bulk forming, 199 199 FMS Instrumented impact test Planning of tool supply to a group of machines, 214 The effect of the testing conditions on the fracture mechanics FORGE2 characteristics of short glass fibre reinforced polyamide, 143 An analysis of external inversion of round tubes, 243 Interfaces Forward slip Study on interactions in diamond—ceramic material systems, 118 Forward slip measurements in cold rolling by laser Doppler velo- Internal stresses cimetry: uncertainty analysis and accuracy improvement, 348 Turning and grinding as a source of microstructural changes in the Fracture toughness surface layer of hardened steel, 21 The effect of microstructure on the mechanical properties of two- Inverse analysis phase titanium alloys, 84 Effect of chill thickness and superheat on casting/chill interfacial The effect of the testing conditions on the fracture mechanics heat transfer during solidification of commercially pure alumi- characteristics of short glass fibre reinforced polyamide, 143 nium, 257 Free-form surface Accuracy analysis of 3D data collection and free-form modelling Kalman Filter methods, 26 A new approach to process control for a bottling plant, 122 Friction factor About input data selection for the FEM analysis of bulk forming, Large deformation 199 An analysis of external inversion of round tubes, 243 Fuzzy Laser Doppler velocimetry Fuzzy surface roughness modeling of CNC down milling of Alu- Forward slip measurements in cold rolling by laser Doppler velo- mic-79, 266 cimetry: uncertainty analysis and accuracy improvement, 348 Fuzzy Logic Liquid level control A new approach to process control for a bottling plant, 122 A new approach to process control for a bottling plant, 122 Liquid-phase sintering Genetic algorithm Influence of additives on density, microstructure and mechanical Responding ability in dynamic production circumstances, 71 properties of alumina, 282 Grinding Loading path Turning and grinding as a source of microstructural changes in the Investigation of the effect of loading path and variation in material surface layer of hardened steel, 21 properties on robustness of the tube hydroforming process, 276 Lock-in thermography Hard turning Technological characterisation of thermoshrinking cross-linked Turning and grinding as a source of microstructural changes in the polyethylene by destructive and non-destructive techniques, 353 surface layer of hardened steel, 21 Low-alloyed steels Heterogeneity Hydrogen degradation of high-strength low-alloyed steels, 230 Determination of the equivalent stress—equivalent strain relation- ship of a copper sample under tensile loading, 79 Manufacturing system High pressure sintering Operational fault diagnosis of manufacturing systems, 108 Study on interactions in diamond—ceramic material systems, 118 Material properties High-speed casting Some comments on cold forming process stability analysis, 166 Strip casting of A5182 alloy using a melt drag twin-roll caster, 103 Investigation of the effect of loading path and variation in material High-speed steel properties on robustness of the tube hydroforming process, 276 Structure and properties of the TiN and Ti(C,N) coatings deposited Mechanical properties in the PVD process on high-speed steels, 50 The influence of nitrogen on the structure and properties of Fe— HVTEM 10Cr—N and Fe—10Cr—1Mo-N steels after tempering in the Creep mechanisms of ferritic oxide dispersion strengthened alloys, temperature range of 650-750 °C, 225 218 Influence of plastic deformation conditions on structure evolution Hybrid method in Nb—Ti microalloyed steel, 236 A hybrid method for casting process simulation by combining FDM Melt drag twin-roll caster and FEM with an efficient data conversion algorithm, 311 Strip casting of A5182 alloy using a melt drag twin-roll caster, 103 402 Subject Index of Volume 133 Melting efficiency Optimization High-productivity multiple-wire submerged-are welding and clad- Integral model of selection of optimal cutting conditions from ding with metal-powder addition, 207 different databases of tool makers, 158 Mesohardness Turning and grinding as a source of microstructural changes in the Planing surface layer of hardened steel, 21 Wood: an important material in manufacturing technology, 134 Metal matrix composites (MMCs) Plastic deformation modeling P/M aluminum matrix composites: an overview, 203 Plastic deformation of a model material containing soft spheroidal Metal powder inclusions: spheroidal graphite cast iron, 297 High-productivity multiple-wire submerged-arc welding and clad- PLC ding with metal-powder addition, 207 Operational fault diagnosis of manufacturing systems, 108 Metal sheet PM2000 Analytical modelling of drawbeads in sheet metal forming, 359 Creep mechanisms of ferritic oxide dispersion strengthened alloys, Microalloyed steel 218 Influence of plastic deformation conditions on structure evolution Polyethylene in Nb—Ti microalloyed steel, 236 Technological characterisation of thermoshrinking cross-linked Microhardness polyethylene by destructive and non-destructive techniques, 353 Mechanical properties of thin film—substrate systems, 189 Powder forging Microstructure Finite element analysis and simulation of powder materials, metal- Turning and grinding as a source of microstructural changes in the lurgical processes and products. A bibliography (1985-2000), surface layer of hardened steel, 21 378 The effect of microstructure on the mechanical properties of two- Powder injection molding phase titanium alloys, 84 Finite element analysis and simulation of powder materials, metal- Influence of additives on density, microstructure and mechanical lurgical processes and products. A bibliography (1985-2000), properties of alumina, 282 378 Milling Powder metallurgy Wood: an important material in manufacturing technology, 134 P/M aluminum matrix composites: an overview, 203 Multipass waterjet cutting Finite element analysis and simulation of powder materials, metal- The cutting performance in multipass abrasive waterjet machining lurgical processes and products. A bibliography (1985-2000), of industrial ceramics, 371 378 Multiple wire Powder moulding High-productivity multiple-wire submerged-arc welding and clad- A PRIME approach for the moulding of conduit ceramic parts, 181 ding with metal-powder addition, 207 Precipitation The influence of nitrogen on the structure and properties of Fe— Nanoindentor 10Cr—N and Fe—10Cr—1Mo-N steels after tempering in the Mechanical properties of thin film—substrate systems, 189 temperature range of 650-750 °C, 225 Nitrogen Processing in the pulse magnetic field The influence of nitrogen on the structure and properties of Fe— Distributions of forces in the inductors used in metal processing in 10Cr—N and Fe—10Cr—1Mo-N steels after tempering in the the pulse magnetic field, 340 temperature range of 650-750 °C, 225 Properties Non-diamond—diamond systems Structure and properties of the TiN and Ti(C,N) coatings deposited Study on interactions in diamond—ceramic material systems, 118 in the PVD process on high-speed steels, 50 Non-ledeburitic tool alloys PVD Economical non-ledeburitic tool alloys—alloying philosophy, Structure and properties of the TiN and Ti(C,N) coatings deposited structure and properties, 39 in the PVD process on high-speed steels, 50 Nonproportional loading Prediction of forming limit diagram with mixed anisotropic kine- Quality assessment matic—isotropic hardening plastic constitutive model based on Accuracy analysis of 3D data collection and free-form modelling stress criteria, 304 methods, 26 Numerical simulation Quick-stop A hybrid method for casting process simulation by combining Work-hardening in the drilling of austenitic stainless steels, 63 FDM and FEM with an efficient data conversion algorithm, 311 RE Numerical simulation of three-dimensional flow, heat transfer, and Accuracy analysis of 3D data collection and free-form modelling solidification of steel in continuous casting mold with electro- methods, 26 magnetic brake, 322 Recrystallization Influence of plastic deformation conditions on structure evolution Object knowledge representation in Nb-Ti microalloyed steel, 236 The method of knowledge representation for a CAPP system, Relaxation 90 Creep mechanisms of ferritic oxide dispersion strengthened alloys, ODS alloys 218 Creep mechanisms of ferritic oxide dispersion strengthened alloys, Rheocasting 218 Influence of thermomechanical treatments on the production of Optimisation rheocast slurries by partial melting, 149 Optimisation of intelligent FMS using the data flow matrix method, 13 Sanding Responding ability in dynamic production circumstances, 71 Wood: an important material in manufacturing technology, 134 Subject Index of Volume 133 Scratch test Surface acoustic wave Mechanical properties of thin film—substrate systems, 189 Applications of shear horizontal surface acoustic waves to thin film Semi-solid alloys evaluation, 34 Influence of thermomechanical treatments on the production of Surface layer rheocast slurries by partial melting, 149 Turning and grinding as a source of microstructural changes in the SFLD surface layer of hardened steel, 21 Prediction of forming limit diagram with mixed anisotropic kine- Surface roughness matic—isotropic hardening plastic constitutive model based on Fuzzy surface roughness modeling of CNC down milling of Alu- stress criteria, 304 mic-79, 266 Shielding flux High-productivity multiple-wire submerged-are welding and clad- Tailored blanks ding with metal-powder addition, 207 Deep drawing of tailored blanks without a blankholder, 128 Sintering Technological database Sintering criterion in metal working processes, 99 Responding ability in dynamic production circumstances, 71 Finite element analysis and simulation of powder materials, metal- TEM lurgical processes and products. A bibliography (1985-2000), 378 Creep mechanisms of ferritic oxide dispersion strengthened alloys, SMEs 218 A new approach to a CAD/CAM system as a part of distributed Tempering environment: Intranet database, 7 The influence of nitrogen on the structure and properties of Fe- Soft inclusions 10Cr—N and Fe—10Cr—1Mo-N steels after tempering in the Plastic deformation of a model material containing soft spheroidal temperature range of 650—750 °C, 225 inclusions: spheroidal graphite cast iron, 297 Tensile loading Solidification Determination of the equivalent stress—equivalent strain relation- Effect of chill thickness and superheat on casting/chill interfacial ship of a copper sample under tensile loading, 79 heat transfer during solidification of commercially pure alumi- Tensile properties nium, 257 The effect of microstructure on the mechanical properties of two- Solidification pattern phase titanium alloys, 84 Numerical simulation of three-dimensional flow, heat transfer, and Thermodynamic analyses solidification of steel in continuous casting mold with electro- Study on interactions in diamond—ceramic material systems, 118 magnetic brake, 322 Thermomechanical treatments Solutioning Influence of thermomechanical treatments on the production of Influence of plastic deformation conditions on structure evolution rheocast slurries by partial melting, 149 in Nb-Ti microalloyed steel, 236 Thermoshrinking cable insulation Speed slip Technological characterisation of thermoshrinking cross-linked Forward slip measurements in cold rolling by laser Doppler velo- polyethylene by destructive and non-destructive techniques, 353 cimetry: uncertainty analysis and accuracy improvement, 348 Thickness distribution Spheroidal graphite cast iron Investigation of thickness variation and corner filling in tube Plastic deformation of a model material containing soft spheroidal hydroforming, 287 inclusions: spheroidal graphite cast iron, 297 Thin film SSBW Mechanical properties of thin film—substrate systems, 189 Applications of shear horizontal surface acoustic waves to thin film Three-dimensional turbulent flow evaluation, 34 Numerical simulation of three-dimensional flow, heat transfer, and Strain paths solidification of steel in continuous casting mold with electro- Prediction of forming limit diagram with mixed anisotropic kine- magnetic brake, 322 matic—isotropic hardening plastic constitutive model based on Ti(C,N) stress criteria, 304 Structure and properties of the TiN and Ti(C,N) coatings deposited Strains in the PVD process on high-speed steels, 50 Determination of the equivalent stress—equivalent strain relation- TiN ship of a copper sample under tensile loading, 79 Structure and properties of the TiN and Ti(C,N) coatings deposited Strength in the PVD process on high-speed steels, 50 Influence of additives on density, microstructure and mechanical Tolerance field properties of alumina, 282 Some comments on cold forming process stability analysis, 166 Strip casting Tool management Strip casting of A5182 alloy using a melt drag twin-roll caster, 103 Planning of tool supply to a group of machines, 214 Structure Transformation strengthening Structure and properties of the TiN and Ti(C,N) coatings deposited Alumina ceramics with partially stabilized zirconia for cutting in the PVD process on high-speed steels, 50 tools, 195 Structure and properties of the brazed joints Tube hydroforming Producibility of brazed high-dimension centrifugal compressor Investigation of the effect of loading path and variation in material impellers, 174 properties on robustness of the tube hydroforming process, 276 Submerged-arc welding Investigation of thickness variation and corner filling in tube High-productivity multiple-wire submerged-arc welding and clad- hydroforming, 287 ding with metal-powder addition, 207 Turning Superheat Integral model of selection of optimal cutting conditions from Effect of chill thickness and superheat on casting/chill interfacial different databases of tool makers, 158 heat transfer during solidification of commercially pure alumi- Twin-roll caster nium, 257 Strip casting of A5182 alloy using a melt drag twin-roll caster, 103 404 Subject Index of Volume 133 Two-phase titanium alloys Wood cutting The effect of microstructure on the mechanical properties of two- Wood: an important material in manufacturing technology, 134 phase titanium alloys, 84 Work-hardening Work-hardening in the drilling of austenitic stainless steels, 63 Ultrasound Working processes A new approach to process control for a bottling plant, 122 Sintering criterion in metal working processes, 99 www applications Vacuum brazing A new approach to a CAD/CAM system as a part of distributed Producibility of brazed high-dimension centrifugal compressor environment: Intranet database, 7 impellers, 174 Viscosity sensors Zirconia partially stabilized with yttria Applications of shear horizontal surface acoustic waves to thin film Alumina ceramics with partially stabilized zirconia for cutting evaluation, 34 tools, 195 ZrOS”” monoclinic form Wire straightening Alumina ceramics with partially stabilized zirconia for cutting Some comments on cold forming process stability analysis, tools, 195 166 ZrO’ tetragonal form Wood Alumina ceramics with partially stabilized zirconia for cutting Wood: an important material in manufacturing technology, 134 tools, 195