Journal of Materials Processing Technology Journal of Materials Processing Technology 105 (2000) 421 www.elsevier.com/locate/jmatprotec Author Index of Volume 105 Alexandrov, S., 278 Kang, C.G., 269 Pinwill, 1., 119, 128 Arentoft, M., 246 Kao, J.Y., 55 Karamis, M.B., 73 Qian, J., 80 Bhadauria, P., 371 Karunakaran, K.P., 371 Keum, Y.T., 7 Ruan, X.Y., 253 Celik, H., 237 Kim, B.M., 49 Chang, C.-S., 302 Kim, E.S., 42 Samuel, M., 382 Chen, F.-K., 134 Kim, H., 294 Selcuk, B., 73 Chen, S.-H., 333 Kim, H.Y., 294 Seo, D., 294 Chen, Y.C., 327 Kim, N., 294 Shanmuganathan, P.V., 371 Cho, S.S., 196 Komori, K., 24 Shet, C., 95 Cho, W.G., 269 Koumura, K., 24 Sun, J., 204 Choi, J.C., 49 Kuzucu, V., 73 Sun, J.S., 110 Chou, J.-H., 333 Chun, B.S., 196 Lee, B.Y., 1, 61 Tarng, Y.S., 1, 55, 61 Colas, R., 258 Lee, E.C., 55 Thiruvarudchelvan, S., 161 Lee, H.P., 110 Thomson, P.F., 215 Dang, C., 152 Lee, J.H., 196 Tong, K.K., 128 Darwish, S.M.H., 221, 230 Lee, K.H., 42, 110 Torres, M., 258 Dashu, P., 32 Lee, Y.-C., 134 Tzou, G.-Y., 344 Deng, X., 95 Li, H., 119 Dong, L., 32 Li, J.-J., 333 Wang, B., 67 Li, W., 80, 284 Wang, H., 161 Eriksen, M., 246 Li, X., 152 Wang, J., 215 Ertekin, Y.M., 394, 407 Lii, H.R., 1 Wang, Z.R., 38 Lin, H.C., 327 Wanheim, T., 246 Flitman, A., 215 Lin, J., 17 Won, C.W., 196 Lin, K.M., 327 Wu, X., 215 Gal, J.A., 204 Lo, C.Y., 87 Gang, L., 264 Lo, S.-P., 143 Xu, W.L., 38 Ghanya, A., 221 Luoxing, L., 32 Ghoo, B.Y., 7 Yang, M., 67 Guanlong, C., 264 Maeng, D.Y., 196 Yang, Y.Y., 38 Mai, Y.-W., 204 Ye, Z., 152 He, Y., 191 Moon, Y.H., 42 Yilbas, B.S., 352 Heo, Y., 294 Yingjun, J., 191 Hogg, M., 204 Niu, X.P., 119, 128 Yong, J., 32 Hong, K.K., 87 Nizam, S.M., 352 Youxia, B., 264 Hu, B.H., 119, 128 Yiicel, A., 73 Huang, M.-N., 344 Ohmori, H., 80, 284 Yuli, L., 191 Okafor, A.C., 394, 407 ipek, R., 73 Izciler, M., 237 Pandey, A., 371 Zhang, C., 284 Park, J.H., 49 Zhang, L.C., 204 Jadhav, S.J., 371 Payor, S., 204 Zhang, X.Q., 253 Jin, Z.H., 38 Pedersen, T.@., 359 Zhichao, S., 191 Jung, H.K., 176 Peng, Y.H., 253 Zhonggin, L., 264 Elsevier Science S.A. PII: S0924-0136(00)00799-8 Journal of Materials Processing Technology Journal of Materials Processing Technology 105 (2000) 423-427 www.elsevier.com/locate/jmatprotec Subject Index of Volume 105 Abrasive wear performance Chatter Two- and three-body abrasive wear behaviour of different heat- Chatter suppression in turning operations with a tuned vibration treated boron alloyed high chromium cast iron grinding balls, absorber, 55 237 Chinese script Adaptive slicing The effects of processing parameters on the microstructure and Rapid prototyping of metallic parts and moulds, 371 mechanical properties of modified B390 alloy in direct squeeze Advanced ceramics casting, 196 Small-hole machining of ceramic material with electrolytic inter- Circular drawbead val-dressing (ELID-II) grinding, 284 Forming and drawing characteristics of tailor welded sheets in a Al die-casting circular drawbead, 294 Vacuum assisted high pressure die casting of aluminium alloys, 119 Clad sheet bonding Amplitude Analysis of clad sheet bonding by cold rolling, 32 Damping of honeycomb sandwich beams, 67 CNC machine tool accuracy Assembly technique Vertical machining center accuracy characterization using laser Effect of tool bit insert-holder assembly on the quality of machined interferometer. Part 1. Linear positional errors, 394 workpieces, 230 Vertical machining center accuracy characterization using laser Asymmetrical PV cold rolling interferometer. Part 2. Angular errors, 407 Study on the minimum thickness for the asymmetrical PV cold Coaxial laser cladding rolling of sheet, 344 Numerical simulation of the focused powder streams in coaxial Axisymmetric compression laser cladding, 17 An analysis of the axisymmetric compression of viscous materials, Cold rolling 278 Analysis of clad sheet bonding by cold rolling, 32 Cold-extrusion punch B390 Failure analysis of a cold-extrusion punch to enhance its quality and The effects of processing parameters on the microstructure and prolong its life, 134 mechanical properties of modified B390 alloy in direct squeeze Cold-forging tools casting, 196 Numerical studies of low cycle fatigue in forward extrusion dies, Bean-bag 359 Damping of honeycomb sandwich beams, 67 Columnar powder streams Blank-holder surface Numerical simulation of the focused powder streams in coaxial Effect of types of blank-holder surface on box part drawing, 38 laser cladding, 17 Blank-holding force Combined extrusion Investigations into the hydraulic-pressure augmented deep drawing Finite element analysis of the combined extrusion of semi-solid process, 161 material and its experimental verification, 49 Bond strength Composite materials Analysis of clad sheet bonding by cold rolling, 32 Damping of honeycomb sandwich beams, 67 Borided Cover panel An evaluation of the possibilities of using borided GG25 cast iron Study on the drawbead setting of the large deformation area in a instead of chilled GG25 cast iron (surface properties), 73 trunk lid, 264 Boron alloys Cyclic plasticity Two- and three-body abrasive wear behaviour of different heat- Numerical studies of low cycle fatigue in forward extrusion dies, treated boron alloyed high chromium cast iron grinding balls, 359 237 Cylindrical grinding Breakage Precision internal grinding with a metal-bonded diamond grinding Effect of types of blank-holder surface on box part drawing, 38 wheel, 80 Carbon steel A model for heat conduction through the oxide layer of steel during Damping hot rolling, 258 Damping of honeycomb sandwich beams, 67 Cast iron Damping capacity An evaluation of the possibilities of using borided GG25 cast iron Effect of tool bit insert-holder assembly on the quality of machined instead of chilled GG25 cast iron (surface properties), 73 workpieces, 230 Chamfered main cutting edge Deformation Prediction of cutting forces for the milling of plain carbon steel Simulation of deformation and temperature in multi-pass H-shape using chamfered main cutting edge tools, 302 rolling, 24 Elsevier Science S.A. PII: S0924-0136(00)00800-1 424 Subject Index of Volume 105 Die casting Filling behavior Design and optimisation of runner and gating systems for the die Mechanical properties and their microstructure evaluation in the casting of thin-walled magnesium telecommunication parts thixoforming process of semi-solid aluminum alloys, 269 through numerical simulation, 128 Final holding time Die cavity The induction heating process of semi-solid aluminium alloys for Effect of types of blank-holder surface on box part drawing, 38 thixoforming and their microstructure evaluation, 176 Die design Finite element Design and optimisation of runner and gating systems for the die Computational modelling of a precision optical lens polishing casting of thin-walled magnesium telecommunication parts process on small radius spherical surfaces, 204 through numerical simulation, 128 Finite element analysis Dimensional accuracy Finite element analysis of the combined extrusion of semi-solid Effect of tool bit insert-holder assembly on the quality of machined material and its experimental verification, 49 workpieces, 230 Finite element method Draw restraining force Simulation of deformation and temperature in multi-pass H-shape Study on the drawbead setting of the large deformation area in a rolling, 24 trunk lid, 264 Optimization of the main parts of hydroelectric sets using hybrid Drawbead restraining force genetic algorithm, 152 Expert drawbead models for sectional FEM analysis of sheet metal Forming and drawing characteristics of tailor welded sheets in a forming processes, 7 circular drawbead, 294 Drawbead setting Finite element simulation Study on the drawbead setting of the large deformation area in a Finite element analysis of the orthogonal metal cutting process, 95 trunk lid, 264 Finite-difference method Dressing Simulation of deformation and temperature in multi-pass H-shape Precision internal grinding with a metal-bonded diamond grinding rolling, 24 wheel, 80 Flow-in Drilling Critical assessment of weld-bonded technologies, 221 A study on the machining characteristics of TiNi shape memory Fracture prediction alloys, 327 Simulation and fracture prediction for sintered materials in upset- Drills ting by FEM, 253 Wear behavior of TiN coated AISI H11 and AISI M7 twist drills Free deformation prior to plasma nitriding, 352 Experimental study of the tube axial compression forming process Dynamic problems with free dieless deformation, 191 Comparison of implicit and explicit finite element methods for Frictional coefficient dynamic problems, 110 Study on the minimum thickness for the asymmetrical PV cold rolling of sheet, 344 Electrolytic in-process dressing Front tension Precision internal grinding with a metal-bonded diamond grinding Study on the minimum thickness for the asymmetrical PV cold wheel, 80 rolling of sheet, 344 Electrolytic interval-dressing (ELID-II) grinding Small-hole machining of ceramic material with electrolytic inter- Genetic algorithm val-dressing (ELID-II) grinding, 284 Optimization of the main parts of hydroelectric sets using hybrid Error modeling genetic algorithm, 152 Vertical machining center accuracy characterization using laser Geometrical factor interferometer. Part 1. Linear positional errors, 394 A neural networks approach to investigating the geometrical influ- Vertical machining center accuracy characterization using laser ence on wrinkling in sheet metal forming, 215 interferometer. Part 2. Angular errors, 407 Geometrical tolerance Error prediction Effect of tool bit insert-holder assembly on the quality of machined Vertical machining center accuracy characterization using laser workpieces, 230 interferometer. Part 1. Linear positional errors, 394 Globular microstructure Vertical machining center accuracy characterization using laser The induction heating process of semi-solid aluminium alloys for interferometer. Part 2. Angular errors, 407 thixoforming and their microstructure evaluation, 176 Expert drawbead model Grey-fuzzy controller Expert drawbead models for sectional FEM analysis of sheet metal Application of the Taguchi-genetic method to design an optimal forming processes, 7 grey-fuzzy controller of a constant turning force system, 333 Explicit finite element method Grinding Comparison of implicit and explicit finite element methods for An inverse analysis for the heat conduction during a grinding dynamic problems, 110 process, 87 Grinding fluid type Face milling Small-hole machining of ceramic material with electrolytic inter- Prediction of cutting forces for the milling of plain carbon steel val-dressing (ELID-II) grinding, 284 using chamfered main cutting edge tools, 302 Failure analysis Heat conduction Failure analysis of a cold-extrusion punch to enhance its quality and An inverse analysis for the heat conduction during a grinding prolong its life, 134 process, 87 FEM Heat transfer Simulation and fracture prediction for sintered materials in upset- A model for heat conduction through the oxide layer of steel during ting by FEM, 253 hot rolling, 258 Subject Index of Volume 105 Honeycomb structures Metallic fillers Damping of honeycomb sandwich beams, 67 Critical assessment of weld-bonded technologies, 221 Hot rolling Microhardness A model for heat conduction through the oxide layer of steel during Critical assessment of weld-bonded technologies, 221 hot rolling, 258 Microstructure Hydraulic-pressure augmented Finite element analysis of the combined extrusion of semi-solid Investigations into the hydraulic-pressure augmented deep drawing material and its experimental verification, 49 process, 161 Mechanical properties and their microstructure evaluation in the Hypereutectic Al-—Si alloy thixoforming process of semi-solid aluminum alloys, 269 A feasibility study of the partial squeeze and vacuum die casting Minimum production cost process, 42 Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations, Implicit finite element method 61 Comparison of implicit and explicit finite element methods for Minimum thickness dynamic problems, 110 Study on the minimum thickness for the asymmetrical PV cold Induction heating rolling of sheet, 344 The induction heating process of semi-solid aluminium alloys for Modelling thixoforming and their microstructure evaluation, 176 An investigation of modeling of the machining database in turning Injection pressure operations, | A feasibility study of the partial squeeze and vacuum die casting Computational modelling of a precision optical lens polishing process, 42 process on small radius spherical surfaces, 204 Injection speed A model for heat conduction through the oxide layer of steel during A feasibility study of the partial squeeze and vacuum die casting hot rolling, 258 process, 42 Modification Inverse analysis The effects of processing parameters on the microstructure and An inverse analysis for the heat conduction during a grinding mechanical properties of modified B390 alloy in direct squeeze process, 87 casting, 196 Iron grinding balls Two- and three-body abrasive wear behaviour of different heat- Near-net slice treated boron alloyed high chromium cast iron grinding balls, Rapid prototyping of metallic parts and moulds, 371 237 Neural network A neural networks approach to investigating the geometrical influ- Laser interferometer ence on wrinkling in sheet metal forming, 215 Vertical machining center accuracy characterization using laser Numerical analysis interferometer. Part 1. Linear positional errors, 394 Simulation of deformation and temperature in multi-pass H-shape Vertical machining center accuracy characterization using laser rolling, 24 interferometer. Part 2. Angular errors, 407 Numerical simulation Limit roll speed ratio Numerical simulation of the focused powder streams in coaxial Study on the minimum thickness for the asymmetrical PV cold laser cladding, 17 rolling of sheet, 344 Design and optimisation of runner and gating systems for the die Linear multiple regression method casting of thin-walled magnesium telecommunication parts Expert drawbead models for sectional FEM analysis of sheet metal through numerical simulation, 128 forming processes, 7 Low cycle fatigue Oblique cutting Numerical studies of low cycle fatigue in forward extrusion dies, Prediction of cutting forces for the milling of plain carbon steel 359 using chamfered main cutting edge tools, 302 Optical lens Machining database Computational modelling of a precision optical lens polishing An investigation of modeling of the machining database in turning process on small radius spherical surfaces, 204 operations, | Optimal inductive coil design Magnesium The induction heating process of semi-solid aluminium alloys for Design and optimisation of runner and gating systems for the die thixoforming and their microstructure evaluation, 176 casting of thin-walled magnesium telecommunication parts Optimal reheating conditions through numerical simulation, 128 The induction heating process of semi-solid aluminium alloys for Maximum friction thixoforming and their microstructure evaluation, 176 An analysis of the axisymmetric compression of viscous materials, Optimization 278 Cutting-parameter selection for maximizing production rate or Maximum production rate minimizing production cost in multistage turning operations, Cutting-parameter selection for maximizing production rate or 61 minimizing production cost in multistage turning operations, Optimization design 61 Optimization of the main parts of hydroelectric sets using hybrid Mechanical cutting genetic algorithm, 152 A study on the machining characteristics of TiNi shape memory Orthogonal design alloys, 327 Experimental study of the tube axial compression forming process Metal-bonded grinding wheel with free dieless deformation, 191 Precision internal grinding with a metal-bonded diamond grinding Orthogonal metal cutting wheel, 80 Finite element analysis of the orthogonal metal cutting process, 95 426 Subject Index of Volume 105 Oxidation Semi-solid aluminum alloy A model for heat conduction through the oxide layer of steel during Mechanical properties and their microstructure evaluation in the hot rolling, 258 thixoforming process of semi-solid aluminum alloys, 269 Semi-solid forming Partial squeeze and vacuum die casting Finite element analysis of the combined extrusion of semi-solid A feasibility study of the partial squeeze and vacuum die casting material and its experimental verification, 49 process, 42 Semi-solid material Photomicrograph Finite element analysis of the combined extrusion of semi-solid Critical assessment of weld-bonded technologies, 221 material and its experimental verification, 49 Plasma nitriding Separation criterion Wear behavior of TiN coated AISI H11 and AISI M7 twist drills An analysis of cutting under different rake angles using the finite prior to plasma nitriding, 352 element method, 143 Plunger stroke Sheet metal A feasibility study of the partial squeeze and vacuum die casting Experimental and numerical prediction of springback and side wall process, 42 curl in U-bendings of anisotropic sheet metals, 382 Polynomial networks Sheet metal forming An investigation of modeling of the machining database in turning A neural networks approach to investigating the geometrical influ- operations, 1 ence on wrinkling in sheet metal forming, 215 Porosity Silver Mechanical properties and their microstructure evaluation in the Prediction of cutting forces for the milling of plain carbon steel thixoforming process of semi-solid aluminum alloys, 269 using chamfered main cutting edge tools, 302 Porosity and blisters Sintered materials Vacuum assisted high pressure die casting of aluminium alloys, Simulation and fracture prediction for sintered materials in upset- 119 ting by FEM, 253 Precision grinding Slab method Precision internal grinding with a metal-bonded diamond grinding Study on the minimum thickness for the asymmetrical PV cold wheel, 80 rolling of sheet, 344 Precision polishing Small-hole machining Computational modelling of a precision optical lens polishing Small-hole machining of ceramic material with electrolytic inter- process on small radius spherical surfaces, 204 val-dressing (ELID-II) grinding, 284 Pre-strain Solid fraction Expert drawbead models for sectional FEM analysis of sheet metal Finite element analysis of the combined extrusion of semi-solid forming processes, 7 material and its experimental verification, 49 Pre-stressing Spherical surface Numerical studies of low cycle fatigue in forward extrusion dies, Computational modelling of a precision optical lens polishing 359 process on small radius spherical surfaces, 204 Process characteristics Spot weld Small-hole machining of ceramic material with electrolytic inter- Critical assessment of weld-bonded technologies, 221 val-dressing (ELID-II) grinding, 284 Springback Punch life Experimental and numerical prediction of springback and side wall Failure analysis of a cold-extrusion punch to enhance its quality and curl in U-bendings of anisotropic sheet metals, 382 prolong its life, 134 Squeeze casting Punch-stroke The effects of processing parameters on the microstructure and Investigations into the hydraulic-pressure augmented deep drawing mechanical properties of modified B390 alloy in direct squeeze process, 161 casting, 196 Squeeze pressure Rake angle A feasibility study of the partial squeeze and vacuum die casting An analysis of cutting under different rake angles using the finite process, 42 element method, 143 Staircase effect Rapid prototyping and tooling Rapid prototyping of metallic parts and moulds, 371 Rapid prototyping of metallic parts and moulds, 371 Stochastic direction method Relative density Optimization of the main parts of hydroelectric sets using hybrid Simulation and fracture prediction for sintered materials in upset- genetic algorithm, 152 ting by FEM, 253 Stream function method Residual stress Analysis of clad sheet bonding by cold rolling, 32 An analysis of cutting under different rake angles using the finite Strip-wound containers element method, 143 Numerical studies of low cycle fatigue in forward extrusion dies, 359 Restraining force Forming and drawing characteristics of tailor welded sheets in a Taguchi-genetic method circular drawbead, 294 Application of the Taguchi-genetic method to design an optimal Rolling grey-fuzzy controller of a constant turning force system, 333 Simulation of deformation and temperature in multi-pass H-shape Tailor welded sheet rolling, 24 Forming and drawing characteristics of tailor welded sheets in a circular drawbead, 294 Sectional forming analysis Temperature Expert drawbead models for sectional FEM analysis of sheet metal Simulation of deformation and temperature in multi-pass H-shape forming processes, 7 rolling, 24 Subject Index of Volume 105 Temperature gradient Turning force The induction heating process of semi-solid aluminium alloys for Application of the Taguchi-genetic method to design an optimal thixoforming and their microstructure evaluation, 176 grey-fuzzy controller of a constant turning force system, 333 The upper bound theorem Analysis of clad sheet bonding by cold rolling, 32 U-bendings Thermal and geometrical errors Experimental and numerical prediction of springback and side wall Vertical machining center accuracy characterization using laser curl in U-bendings of anisotropic sheet metals, 382 interferometer. Part 1. Linear positional errors, 394 Upper-bound method Vertical machining center accuracy characterization using laser An analysis of the axisymmetric compression of viscous materials, interferometer. Part 2. Angular errors, 407 278 Thermomechanical fields Finite element analysis of the orthogonal metal cutting process, Vacuum 95 Vacuum assisted high pressure die casting of aluminium alloys, 119 Thin-walled casting Vibration Design and optimisation of runner and gating systems for the die Damping of honeycomb sandwich beams, 67 casting of thin-walled magnesium telecommunication parts Vibration absorber through numerical simulation, 128 Chatter suppression in turning operations with a tuned vibration Thixoforging absorber, 55 Mechanical properties and their microstructure evaluation in the Viscous material thixoforming process of semi-solid aluminum alloys, 269 An analysis of the axisymmetric compression of viscous materials, TiN 278 Wear behavior of TiN coated AISI H1i1 and AISI M7 twist drills prior to plasma nitriding, 352 Wear TiNi shape memory alloys An evaluation of the possibilities of using borided GG25 cast iron A study on the machining characteristics of TiNi shape memory instead of chilled GG25 cast iron (surface properties), 73 alloys, 327 Wear behavior of TiN coated AISI H11 and AISI M7 twist drills Tube axial compressing prior to plasma nitriding, 352 Experimental study of the tube axial compression forming process Weld-bond with free dieless deformation, 191 Critical assessment of weld-bonded technologies, 221 Tube forming Weld-through Experimental study of the tube axial compression forming process Critical assessment of weld-bonded technologies, 221 with free dieless deformation, 191 Wheel shape and profile Turning Small-hole machining of ceramic material with electrolytic inter- An investigation of modeling of the machining database in turning val-dressing (ELID-II) grinding, 284 operations, | White chip Chatter suppression in turning operations with a tuned vibration Prediction of cutting forces for the milling of plain carbon steel absorber, 55 using chamfered main cutting edge tools, 302 Cutting-parameter selection for maximizing production rate or Wrinkling minimizing production cost in multistage turning operations, A neural networks approach to investigating the geometrical influ- 61 ence on wrinkling in sheet metal forming, 215