CURRICULUM VITAE Ir. Ts. Dr. Abd. Rahim Bin Abu Talib, P.Eng PC, P.Tech Associate Professor Department of Aerospace Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor T: 019-2483075 F: 03-8656 7125 E: [email protected] or [email protected] ORCID: orcid.org/0000-0003-4021-4460 SCOPUS ID: 21741790100, h-index: 9 (Scopus), 12 (Google Scholar) D.O.B: 16th June 1975 (43 years old) Marital Status: Married Education 1. D.Phil. in Engineering Science, 2003, University of Oxford, U.K 2. B.Eng (hons.) in Aeronautical Engineering, 1998, University of Salford, U.K 3. A-Levels and IELTS, 1994, PPP/ITM, Shah Alam, Selangor D.E. 4. Sijil Pelajaran Malaysia (SPM), 1992, Kolej Islam Sultan Alam Shah, Klang, Selangor D.E. 5. Sijil Rendah Pelajaran (SRP), 1990, Sek. Men. Keb. Agama Maahad, Muar, Johor D.T. Areas of Interest Experimental Heat Transfer and Fluid Flow, Aviation Biofuel, Fire Precautions Technology and Medical Devices. Professional Qualification/ Membership/ Affiliation 1. Professional Technologist, Malaysia Board of Technologist (MBoT) PT17100016 2017 - to date 2. Professional Engineer with Practicing Certificate, Board of Engineers (BEM) C1-16516 2016 – to date 3. Fellow, Malaysian Society of Engineering and Technology (FMSET) - 00095 2016 – to date 4. Professional Engineer, Board of Engineers Malaysia (BEM) - 16516 2014 – to 2016 5. Member, Aerospace Society of Malaysia (AEROS) - 00019 2017 - to date 6. Ordinary Member, Malaysian Society of Engineering and Technology (MySET) - 00095 2008 – 2016 7. Graduate Member, Board of Engineers Malaysia (BEM) 43450-A 2003 – 2014 8. Member, American Society of Mechanical Engineers (ASME) 2000 – to date 9. Student Member, Royal Aeronautical Society (RAeS) 1996 – 1998 1 (Updated Feb 2018) Appointments Position Duration 1. Head, Department of Aerospace Engineering, UPM 1.10.2017 - to date 2016 - 2017 2. Deputy Director, Corporate Strategy and Communications, Office of the Vice Chancellor, UPM 3. Head of Aerospace, Industry Intelligence Division, Malaysia Industry-Government for 2014 – 2015 High Technology (MIGHT) (320059-P) Roles: Responsible for the aerospace and rail industry sector development. Major Achievements: Successfully published the 2nd Aerospace Industry Blueprint 2030 and launched of the blueprint during LIMA 2015 in Langkawi by the Prime Minister. Also involved in the aerospace industry inter agency committee for the new EPP8 for Aerospace Manufacturing SME development and the ongoing EPP 5 and 7 under Business Services NKEA. Actively involved as subject matter expert and managed the technology transfer programme for human capital training modules for Rail rolling stock with China Southern Rail company and KTMB. Also responsible as subject matter expert for the Rail signaling and communications training modules technology transfer with THALES company in France, Portugal and Spain under the offset programme organised by Technology Depository Agency. 4. Senior General Manager, MIGHT-METEOR Advanced Manufacturing Sdn. Bhd. 2012 – 2014 (570935-P) Roles: In charge of the operation of the company that includes governance, finance and procedures. Major Achievements: Successfully delivered the Human Capital Development training programme called National Talent Enhancement Programme (NTEP) for Rail Sector funded by PEMANDU. Also involved in the technology transfer under ICPD programme to FELDA and LEADER Aerospace Programme funded by the Ministry of Higher Education (MoHE). 5. Chief Operating Officer, Aerospace Malaysia Innovation Centre (944751-A) 2011 - 2012 Roles: Responsible to look after the technical aspect of project management and programme development. Major Achievements: Successfully established the governance for the newly formed company linked by guaranteed in terms of staff manuals, finance, and research & technology guidelines. Managed to conduct a series of board of directors meeting that consist of representatives from Rolls Royce, Airbus, CTRM, MIGHT and UPM. AMIC also successfully being launched during LIMA 2011 by the Prime Minister. 6. Associate Professor, Department of Aerospace Engineering, UPM 1.2.2010 - to date 7. Deputy Dean, (Academic, Student Affairs, Alumni, and Industry-Society Network) Faculty 2009 - 2011 of Engineering, UPM 8. Senior Lecturer, Department of Aerospace Engineering, UPM 2008 – 2010 9. Head, Department of Aerospace Engineering, UPM 2007 – 2009 10. Lecturer, Department of Aerospace Engineering, UPM 2003 – 2007 11. Laboratory Demonstrator, University of Oxford, UK 2001 – 2002 2 (Updated Feb 2018) 12. Tutor, Department of Aerospace Engineering, UPM 1998 – 2003 Teachings Undergraduate Programme 1. EAS4501 Air Breathing Engine 3(3+0) 2. EAS3103 Management of Aerospace Industry and Agriculture 2(2+0) 3. EAS3921 Aerospace Laboratory I – Thermofluid 1(0+1) 4. EAS3211 Thermofluids 3(3+0) 5. EAS3511 Aerothermodynamics 3(3+0) 6. EAS3503 Propulsion 3(3+0) 7. KAA3512 Heat Transfer 2(2+0) 8. KAA3511 Thermodynamics 3(3+0) 9. KAA3513 Propulsion 3(3+0) 10. KAA3403 Propulsion II 3(3+0) 11. KAA3202 Aerodynamics II 3(3+0) 12. KAA3802 Power Generation System 3(3+0) Postgraduate Programme 1. EAS5103 Group Business and Design Project 3(3+0) 2. EAB5900 Research Methodology 3(3+0) 3. EAS5101 Innovation Studies 1 3(3+0) 4. KAA4203 Innovation Studies 1 3(3+0) Publications Journals 1. I Mohammed, A.R Abu Talib, M T H Sultan and S Saadon (2018), Mechanical Properties of Fibre-Metal Laminates Made of Natural/Synthetic Fibre Composites, BioResources, 13(1): 2022-2034 (JCR Q1). 2. I Mohammed, A.R Abu Talib, M T H Sultan and S Saadon (2017), Ballistic Impact Velocity Response of Carbon Fibre Reinforced Aluminium Alloy Laminates for Aero-engine, IOP: Materials Science and Engineering, 270(1) 012026, doi: 10.1088/1757-899X/270/1/012026 (Scopus Index). 3. M.F Abdul Hamid, A.R Abu Talib, A.S Mohd Harithuddin, E Gires, F.I Romli, M.Y Harmin (2017) Coandă configured aircraft: A preliminary analytical assessment, IOP: Materials Science and Engineering, 270(1) 012004, doi:10.1088/1757-899X/270/1/012004 (Scopus Index). 4. A.R Abu Talib, and N. Bheekun (2017), Feasibility Study of a Novel Aerogel-Based Thermally Sprayed Coating, Journal of Engineering Science and Technology, Accepted (Scopus Index). 5. R.I Ahmed, H. Djojodihardjo, A.R Abu Talib, A.S Mohd Rafie (2017), Review on Progress and Application of Active Flow Control Devices Coandă Effect on Unmanned Aerial Vehicles, Pertanika Journal of Scholarly Research Reviews, 3(1): 113-137. 6. M.N Ishak, A.R Abu Talib, M. Y Harmin and R. Zahari (2017), Design Improvement of Multi-Purpose Disposable Safety Syringe, FEIIC International Journal of Engineering and Technology, 14(1): 25-34. 7. A.R Abu Talib, M.J Sulaiman @ Ahmad, R. Ibrahim, M.Y Harmin (2017) Hardness and Density Properties Measurements of Sintered Inconel 718 using Palm Oil Based Binder, International Journal for Sustainable Aviation, IJSA-153827, 3(1): 18-28. 8. Ain U. Md Shah, Mohamed T. H. Sultan, Francisco Cardona, Mohammad Jawaid, A.R Abu Talib, and N. Yidris (2017), Thermal Analysis of Bamboo Fibre and Its Composites, BioResources, 12(2): 2394-2406 (JCR Q1). 9. K.A Mohammed, A.R Abu Talib, N. Abdul Aziz, K.A Ahmed (2017) Review of forced convection nanofluids through corrugated facing step, Renewable & Sustainable Energy Reviews, Vol.75: 234-241 (JCR Q1). http://dx.doi.org/10.1016/j.rser.2016.10.067. 10. R.I Ahmed, H. Djojodihardjo, A.R Abu Talib, A.S Mohd Rafie (2017), First Principle Analysis of Coandă Micro Air Vehicle Aerodynamic Forces for Preliminary Sizing, Aircraft Engineering and Aerospace Technology, 89(2) (JCR Q2), DOI: 10.1108/AEAT-03-2015-0080. 11. R.I Ahmed, A.R Abu Talib, A.S Mohd Rafie, H. Djojodihardjo (2017), Aerodynamics and Flight Mechanics of MAV Based on Coandă Effect, Aerospace Science and Technology, 62: 136-147, doi: 10.1016/j.ast.2016.11.023 3 (Updated Feb 2018) (JCR Q1). 12. N. Bheekhun, A.R Abu Talib, S. Mustapha, R. Ibrahim and M.R Hassan (2016), Towards an Aerogel-based Coating for Aerospace Applications: Reconstituting Aerogel Particles via Spray Drying, IOP: Materials Science and Engineering, 152(1) 012066, doi: 10.1088/1757-899X/152/1/012066 (Scopus Index). 13. C.L Liew, A.R Abu Talib and R.L Jacobs (2016), Malaysian Aviation Technologist Promotion to Managerial Role: an Empirical Overview, IOP: Materials Science and Engineering, 152(1) 012039, doi: 10.1088/1757- 899X/152/1/012039 (Scopus Index). 14. K.A Mohammed, A.R Abu Talib, N. Abdul Aziz, and K.A Ahmed (2016), Three Dimensional Numerical Investigations on the Heat Transfer Enhancement in a Triangular Facing Step Channels using Nanofluid, IOP: Materials Science and Engineering, 152(1) 012057, doi: 10.1088/1757-899X/152/1/012057 (Scopus Index). 15. I. Mohammed, A.R Abu Talib, M.T.H Sultan and S. Saadon (2016), Temperature and Heat Flux Measurement Techniques for Aero-engine Fire Test: A Review, IOP: Materials Science and Engineering, 152(1) 012036, doi: 10.1088/1757-899X/152/1/012036 (Scopus Index). 16. M.S Ramli, A.R Abu Talib, M.Y Harmin and H.R Mohd. Saiah (2016) Effect of Multiple Jet Impingement Plate Configurations on Reynolds Number in a Pipe, IOP: Materials Science and Engineering, 152(1) 012012, doi: 10.1088/1757-899X/152/1/012012 (Scopus Index). 17. S. Saadon and A.R Abu Talib (2016), An Analytical Study on the Performance of the Organic Rankine Cycle for Turbofan Engine Exhaust Heat Recovery, IOP: Materials Science and Engineering, 152(1) 012011, doi: 10.1088/1757-899X/152/1/012011 (Scopus Index). 18. Ain U. Md Shah, Mohamed T.H. Sultan, Mohamad Jawaid, Francisco Cardona, and A.R Abu Talib (2016), A Review on the Tensile Properties of Bamboo Fiber Reinforced Polymer Composites, BioResources, 11(4): 0654- 10676 (JCR Q1). 19. H. Alrazen, A.R Abu Talib, K.A Ahmad (2016), A Two-component CFD Studies of the Effects of H , CNG, and 2 Diesel Blend on Combustion Characteristics and Emissions of a Diesel Engine, International Journal of Hydrogen Energy, 41(24): 10483 - 10495 (JCR Q1). 20. F. Cardona, M.T Sultan, A.R Abu Talib, F. Ezzah, A. Derahman (2016), Interpenetrating Polymer Network (IPN) with Epoxidized and Acrylated Bioresins and their Composites with Glass and Jute Fibres, BioResources, 11(1): 2820-2838 (JCR Q1). 21. H. Alrazen, A.R Abu Talib, R. Adnan, and K.A Ahmad (2016), A Review of the Effect of Hydrogen Addition on the Performance and Emissions of the Compression – Ignition Engine, Renewable and Sustainable Energy Reviews, 54, 785 – 796. (JCR Q1). 22. M.J Suleiman @ Ahmad, N. Johari, M.A Ahmad, R. Ibrahim, A.R Abu Talib and M.Y Harmin (2016), Solvent Debinding of Inconel 718 Fabricated via Metal Injection Molding, Advanced Materials Research, 1133, 275 - 279. 23. N. Bheekhun, A.R Abu Talib, M.R Hassan (2014), Thermal spray coatings for polymer matrix composites in gas turbine engines: A literary preview, International Review of Aerospace Engineering, 7(3): 84-87 (Scopus Indexed). 24. A.R Abu Talib, E. Gires, M.T Ahmad (2014), Performance Evaluation of a Small-Scale Turbojet Engine Running on Palm Oil BioDiesel Blends, Journal of Fuels, Article ID 946485, doi: 10.1155/2014/946485. 25. R.I Ahmed, H Djojodihardjo, A.R Abu Talib, M.F Abdul Hamid (2014), Application of Coandă Jet for Generating Lift of Micro Air Vehicles-Preliminary Design Considerations, Applied Mechanics and Materials 629: 139-144 (Scopus Indexed) 26. N. Bheekhun, A.R Abu Talib, H. Hasini, M.R Hassan (2014), Flame Temperature Distribution from ISO2685 Standard Propane-Air Burner using CFD, Applied Mechanics and Materials, 564: 240-244 (Scopus Indexed) 27. N. Johari, R. Ibrahim, M.A Ahmad, M.J Suleiman@Ahmad, A.R Abu Talib (2014), The Effect of Sintering Temperature on Physical Properties of Sintered Inconel 718 for Potential Aerospace Industry Application, Advanced Materials Research, 879: 139-143. (Scopus Indexed) 28. R. Ibrahim, M. Azmiruddin, M. Jabir, N. Johari, M. Muhamad, A.R Abu Talib (2014), Effect of Solid Loading on the Physical Properties of the Sintered Inconel 718 using Metal Injection Moulding (MIM), Advanced Materials Research, 879: 164-168. (Scopus Indexed) 29. M. Azmiruddin, N. Johari, M. Jabir, R. Ibrahim, A.R Abu Talib (2014), Analysis of the Rheological Behaviour and Stability of Inconel 718 Powder Injection Molding (PIM) Feedstock, Advanced Materials Research, 879: 63- 72. (Scopus Indexed) 30. N. Bheekhun, A.R Abu Talib, M.R Hassan (2013), Aerogel in Aerospace: An Overview, Advances in Material Science and Engineering, Volume 2013, Article ID 406065, doi: 10.1155/2013/406065 (JCR Q3) 31. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari (2013), High Velocity Impact Response of Kevlar- 4 (Updated Feb 2018) 29/Epoxy and 6061-T6 Aluminum Laminated Panels, Materials and Design, 43(1): 307-321 (JCR Q1) 32. A.R. Abu Talib, A.A Ramadhan, A.S Mohd Rafie, R. Zahari (2013), Influence of Cut-Out Hole on Multi-Layer Kevlar-29/Epoxy Composite Laminated Plates, Materials and Design, 43(1): 89-98 (JCR Q1) 33. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2012), The Influence of impact on Composite Armour System Kevlar-29/polyester-Al O . IOP Conference Series: Materials Science and Engineering, 36:1 2 3 012028. (Scopus Indexed) 34. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2012), The Behaviour of Fibre Metal Laminates under High Velocity Impact with Different Stacking Sequences Al Alloy, Applied Mechanics and Materials, 225: 213-218 (Scopus Indexed). 35. A.R. Abu Talib, L.H. Abbud, A. Ali, F. Mustapha (2012), Ballistic Impact Performance of Kevlar-29 and Al O 2 3 Powder/Epoxy Targets under High Velocity Impact, Materials and Design, 35(1): 12-19, (JCR Q1) 36. Ali. A., Abbud, L.H., Abu Talib, A.R., Mustapha, F., (2012), Impact resistance of armor composite made of Kevlar-29 and Al O powder, Materials Testing, 54(3): 169-174 (JCR Q3) 2 3 37. A.R Abu Talib, E. Gires, M.T Ahmed, A. Idris (2012), Experimental Performance and Simulation of a Turbojet Engine using Palm Oil Biodiesel and its Blend, 28th Congress of the International Council of the Aeronautical Sciences (ICAS), Brisbane, Australia. (Scopus Indexed) 38. R. Ibrahim, M. Azmirruddin, M. Jabir, N. Johari, M. Muhamad, and A.R. Abu Talib (2012), Injection Molding of Inconel718 Parts for Aerospace Application using Novel Binder System Based on Palm Oil Derivatives, World Academy of Science, Engineering and Technology, 70: 526-530. 39. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari, High Velocity Impact Damage in Kevlar29/Epoxy- AL O , (2012) Journal of Advanced Science and Engineering Research, 2(2): 138-154 (EBSCO Index). 2 3 40. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari, Experimental and Numerical Simulation of Energy Absorption on Composite Kevlar29/Polyester Under High Velocity Impact, (2012), Journal of Advanced Science and Engineering Research, 2: 56-67 (EBSCO Index). 41. L.H. Abbud, A.R. Abu Talib, A. Ali, F. Mustapha (2011), Mechanical properties of interlaminer Kevlar-29 and Al O powder/epoxy composite plates using an analytical approach, Scientific Research and Essays, 6(21): 4455- 2 3 4463, (JCR Q3) 42. A.R Hussein, N.A Abdul Jalil, A.R Abu Talib, (2011) Improvement of Mechanical Welding Properties by using Induced Harmonic Vibration, Journal of Applied Sciences, 11(2): 348-353 (Scopus Index). 43. L.H. Abbud, A.R. Abu Talib, F. Mustapha, A. Ali (2011), Ballistic Limit Behavior of Polymers Transparent Materials Under High Velocity Impact, International Journal of Engineering and Technology, 8(1): 1-6. 44. L.H. Abbud, A.R. Abu Talib, F. Mustapha, H. Tawfique and F.A. Najim (2010) Behaviour of Transparent Material under High Velocity Impact, International Journal of Mechanical and Materials Engineering, 5(1): 123- 128 (JCR Q2). 45. N. Abdullah, A.R Abu Talib, A.A Jaafar and M.A Mohd Salleh (2010) The Basics and Issues of Thermochromic Liquid Crystal Calibrations, Experimental Thermal and Fluid Science, 34(8): 1089-1121, (JCR Q1). 46. A.R Abu Talib, A. Ali, G. Goudah, N.A Che Lah and A.F. Golestaneh (2010) Developing a composite based elliptic springs for automotive applications, Materials and Design, 31(1): 475-484 (JCR Q1). 47. A.R Abu Talib, A. Ali, M.A. Badie. N.A Che Lah and A.F. Golestaneh (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Materials and Design, 31(1): 514-521 (JCR Q1). 48. A.A Hussein, A.R Abu Talib and N.M Adam, (2010), Numerical Simulation of Plain-Fin and Circular Tube Heat Exchanger under Frost Condition, AIP Conference Proceedings, The 10th Asian International Conference on Fluid Machinery (AICFM), Kuala Lumpur, 1225: 327-332. (Scopus Indexed) 49. N. Abdullah, A.R Abu Talib, H.R Mohd. Saiah, A.A Jaafar and M.A Mohd Salleh (2009), Film thickness effects on calibrations of a narrowband thermochromic liquid crystal, Experimental Thermal and Fluid Science, 33(4): 561-578 (JCR Q1). 50. N. Abdullah and A.R Abu Talib (2009) Comparison of Adhesives for Thermocouple Temperature Measurements, Journal of the Institution of Engineers Malaysia, 70(1): 21-35. 51. A.R Abu Talib, A.A Jaafar, A.S Mokhtar and A.H Razali (2007) Significance of Solar Radiation on Aircraft Engine under Cowl Temperature, Proceedings, ASME Turbo Expo, Montreal, Canada, GT2007-28048. (Scopus Index) 52. A.R Abu Talib, A.A Jafaar, A.S Mokhtar and N.A Abdul Jalil (2007) “Flow Measurements Downstream of an Axial Flow Fan Inside an Outdoor Air Conditioning Unit”, International Journal of Engineering and Technology, 4(1): 44-56. 53. A.S Mokhtar, H.S Sultan, M.K Abdullah, E. Mahdi, A.R Abu Talib and A.M.S Hamouda (2007) Numerical Investigations into the Crushing Behaviour of Conical Shell System, International Journal of Engineering and 5 (Updated Feb 2018) Technology, 4(1): 77-85. 54. M.K Abdullah, N.R Mohd Suradi, N. Jamaluddin, A. S Mokhtar, A.R Abu Talib and M.F Zainuddin (2006) K- CHART: A Tool for Research Planning And Monitoring, Journal of Quality Measurement and Analysis, 2(1): 123- 139. 55. M. A. Badie, A. Mahdi, A. R. Abu Talib, E. J. Abdullah and R. Yunus (2006) Automotive Composite Driveshafts: Investigation of the Design Variables Effects, International Journal of Engineering and Technology, 3(2): 227-237. 56. G. Goudah, E. Mahdi, A.R. Abu Talib, A.S. Mokhtar and R. Yunus (2006) Automobile Compression Composite Elliptic Spring, International Journal of Engineering and Technology, 3(2): 139-147. 57. A.R Abu Talib, A.A Jaafar, A.S Mokhtar, Mohd Saiah H.R, I. Abd. Rahim and M.S Abdul Karim (2006) Effects of Blowing Ratio on the Heat Transfer Coefficient Distribution Downstream of a Single Film Cooling Hole, International Journal of Engineering and Technology, 3(1): 37-46. 58. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2005) Detailed Investigation of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner Compared to Levels Derived From a Low-Temperature Analogue Burner, Journal of Engineering for Power and Gas Turbine, 127(2): 249-256. (JCR Q1) 59. A.R Abu Talib, P.T Ireland, A.J. Neely, A.J Mullender and A.S Mokhtar (2005) Low-Temperature Analogue Burner Face Plate Time Response, International Journal of Engineering and Technology, 2(2): 43-50. 60. A.R Abu Talib, P.T Ireland, A.J. Neely, A.J Mullender and A.A Jaafar (2005) Computational Study on Conduction Heat Transfer Through a Thin Film Gauge, International Journal of Engineering and Technology, 2(1): 1-7. 61. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2004) A Novel Liquid Crystal Image Processing Technique Using Multiple Gas Temperature Steps to Determine Heat Transfer Coefficient Distribution and Adiabatic Wall Temperature, Journal of Turbomachinery, 126(4): 587-596. (JCR Q1) 62. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) A Novel Liquid Crystal Image Processing Technique Using Multiple Gas Temperature Steps to Determine Heat Transfer Coefficient Distribution and Adiabatic Wall Temperature, ASME International Gas Turbine Institute, Turbo Expo, 5A: 123-131. (Scopus Index) 63. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) Detailed Investigation of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner Compared to Levels Derived from a Low-Temperature Analogue Burner, ASME International Gas Turbine Institute, Turbo Expo, 169-177. (Scopus Index) 64. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2001) Compact Low-Temperature Analogue of Aero Engine Fire-Certification Burner, Proceedings, ASME Turbo Expo, New Orleans, USA, 2001-GT-0364. (Scopus Index) Conference Proceedings 1. A.R Abu Talib and N Bheekhun (2017) Towards Sustainable Engineering Education: A Preview, FEIIC International Convention on Engineering Education & Research (FICEER), Madinah, Saudi Arabia. 2. M.F Abdul Hamid, A.R Abu Talib, A.S Mohd Harithuddin, E Gires, F.I Romli, M.Y Harmin (2017) Coandă configured aircraft: A preliminary analytical assessment, AEROS Conference, Shangri-La, Putrajaya. 3. I Mohammed, A.R Abu Talib, M T H Sultan and S Saadon (2017), Ballistic Impact Velocity Response of Carbon Fibre Reinforced Aluminium Alloy Laminates for Aero-engine, AEROS Conference, Shangri-La, Putrajaya. 4. N Bheekhun, A.R Abu Talib, S Mustapha, R Ibrahim and M R Hassan (2016), Towards an Aerogel-based Coating for Aerospace Applications: Reconstituting Aerogel Particles via Spray Drying, AEROTECH-VI: Innovation in Aerospace Engineering & Technology, Nov 8-9, Kuala Lumpur Malaysia. (Best Aerospace Application Paper Award) 5. C L Liew, A.R Abu Talib and R L Jacobs (2016), Malaysian Aviation Technologist Promotion to Managerial Role: an Empirical Overview, AEROTECH-VI: Innovation in Aerospace Engineering & Technology, Nov 8-9, Kuala Lumpur Malaysia. 6. K A Mohammed, A.R Abu Talib, N Abdul Aziz, and K A Ahmed (2016), Three Dimensional Numerical Investigations on the Heat Transfer Enhancement in a Triangular Facing Step Channels using Nanofluid, AEROTECH-VI: Innovation in Aerospace Engineering & Technology, Nov 8-9, Kuala Lumpur Malaysia. (Best Aeronautics Paper Award) 7. I Mohammed, A.R Abu Talib, M T H Sultan and S Saadon (2016), Temperature and Heat Flux Measurement Techniques for Aero-engine Fire Test: A Review, AEROTECH-VI: Innovation in Aerospace Engineering & 6 (Updated Feb 2018) Technology, Nov 8-9, Kuala Lumpur Malaysia. 8. M S Ramli, A.R Abu Talib, M Y Harmin and H R Mohd Saiah (2016) Effect of Multiple Jet Impingement Plate Configurations on Reynolds Number in a Pipe, AEROTECH-VI: Innovation in Aerospace Engineering & Technology, Nov 8-9, Kuala Lumpur Malaysia. 9. S Saadon and A.R Abu Talib (2016), An Analytical Study on the Performance of the Organic Rankine Cycle for Turbofan Engine Exhaust Heat Recovery, AEROTECH-VI: Innovation in Aerospace Engineering & Technology, Nov 8-9, Kuala Lumpur Malaysia. 10. A.R Abu Talib, and N. Bheekun (2016), Feasibility Study of a Novel Aerogel-Based Thermally Sprayed Coating, World Research and Innovation Convention on Engineering and Technology (WRICET), pp.63-67, Oct 24-25, Langkawi, Malaysia. 11. M.N Ishak, A.R Abu Talib, M. Y Harmin and R. Zahari (2016), Design Improvement of Multi-Purpose Disposable Safety Syringe, World Research and Innovation Convention on Engineering and Technology (WRICET), pp. 86-95, Oct 24-25, Langkawi, Malaysia. 12. A.R Abu Talib, M.J Suleiman @ Ahmad, R. Ibrahim and M.Y Harmin (2016), The Influence of Palm Stearin on the Powder Injection Molding of Inconel 718 for Aerospace Application, International Symposium on Sustainable Aviation, May 31- June 3, Istanbul, Turkey. 13. Harijono Djojodihardjo, Riyadh I. Ahmed, A.R. Abu Talib, A.S. Mohd-Rafie (2015), Analytical and CFD Visualization Studies of Coandă MAV, 13th Asian Symposium on Visualization, Novosibirsk, Russia. 14. N. Johari, A.R Abu Talib, D.L Abang Abdul Majid, R. Ibrahim, M.A Ahmad, and M.J Suleiman (2014), The Influence of Binder System on Physical and Mechanical properties of Inconel 718 Sintered Parts using Metal Injection Molding (MIM) Technique, Advanced Materials Conference, December 25-26, Bayview Hotel, Langkawi, Malaysia. 15. M.J Suleiman @ Ahmad, N. Johari, M.A Ahmad, R. Ibrahim, A.R Abu Talib and M.Y Harmin (2014), Solvent Debinding of Inconel 718 Fabricated via Metal Injection Molding, Advanced Materials Conference, December 25- 26, Bayview Hotel, Langkawi, Malaysia. 16. A.R Abu Talib, S.K Abu Samah, K. Zainal (2014), Human Capital Development in Malaysian Aerospace Manufacturing Sub-Sector: A New Sustainable and Holistic Approach, 1st MARA International Aerospace Symposium, March 18-19, Royal Chulan Hotel, Kuala Lumpur. 17. R.I Ahmed, H Djojodihardjo, A.R Abu Talib, M.F Abdul Hamid (2014), Application of Coandă Jet for Generating Lift of Micro Air Vehicles-Preliminary Design Considerations, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Kuala Lumpur, Malaysia. 18. N. Abdullah, A.R Abu Talib, R. Varatharajoo, M.I Saripan (2014), Design and Development of a Test Surface for Thermochromic Liquid Crystal Calibrations, 1st KAA Post Graduate Seminar, Faculty of Engineering, UPM, Malaysia. 19. N. Bheekhun, A.R Abu Talib, H. Hasini, M.R Hassan (2013), Flame Temperature Distribution from ISO2685 Standard Propane-Air Burner using CFD, International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E), November 26-28, Hotel Istana, Kuala Lumpur. 20. A.R Abu Talib, Jasmin Baba, E.S Mohd Tahir, M.K Abdullah (2013), Integrated Module Based Education Model for Engineering and Technology, International Engineering Education Conference (IEEC), Madinah, Saudi Arabia. 21. N. Johari, R. Ibrahim, M. A. Ahmad, M.J. Ahmad, A.R. Abu Talib (2012), The Effect of Sintering Temperature on Sintered Inconel 718 on Physical and Mechanical Properties for Potential Aerospace Industry Application, Advanced Materials Conference, December 12-13, Bayview Hotel Langkawi. 22. R. Ibrahim, M. Azmirruddin, M. Jabir, N. Johari, M. Muhamad and A.R. Abu Talib (2012), Effect of Solid Loading on the Physical Properties of The Sintered Inconel718 using Metal Injection Molding (MIM), Advanced Materials Conference, December 12-13, Bayview Hotel Langkawi. 23. R. Ibrahim, M. Azmirruddin, M. Jabir, N. Johari, M. Muhamad, A.R Abu Talib (2012), Injection Molding of Inconel718 Parts for Aerospace Application using Novel Binder System Based on Palm Oil Derivatives, International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Zurich, Switzerland, July 5-6, 2012. 24. A.R Abu Talib, E. Gires, M.T Ahmed, A. Idris (2012), Experimental Performance and Simulation of a Turbojet Engine using Palm Oil Biodiesel and its Blend, 28th Congress of the International Council of the Aeronautical Sciences (ICAS), Brisbane, Australia. 25. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2012) The Behaviour of Fibre-metal Laminates under High Velocity Impact Loading with Different Stacking Sequence of Al Alloy, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Kuala Lumpur, Malaysia. 7 (Updated Feb 2018) 26. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2012) The Response of Composite Armor Kevlar 29 /Epoxy-Al2O3 under High Velocity Impact. The 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMiEJS), Kuala Lumpur, Malaysia. 27. A.R Abu Talib, M.S Jaafar, M.J Megat Mohd Noor, R. Wagiran, N.K Noordin, A. Abdul Aziz, M.R Osman, M.F. A. Rasid, M.I Saripan (2011), Outcome Based Education Management System, International Engineering Education Conference (IEEC), Madinah, Saudi Arabia. 28. F. Jamaludin, A.R Abu Talib, E. Gires (2011), Design and Development of Test Rig for Micro Gas Turbine Engine Performance, Regional Symposium on Engineering and Technology (RSET), Kuching, Sarawak. 29. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2011) The Influence of impact on Composite Armour System Kevlar-29/polyester-Al2O3. 1st International Conference on Mechanical Engineering Research, Kuantan, Malaysia. 30. H. Jabar Hayawi, A.R Abu Talib, A.A Jaafar (2010), Investigation of Heat Transfer Downstream of an Abrupt Expansion Pipe, Regional Conference on Mechanical and Aerospace Technology, Shah Alam, UITM. 31. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari (2010), Analytical Study of Energy Absorption on Composite Kevlar-129/polyester under High Velocity Impact, Proceedings Conference on Aerospace and Mechanical Engineering, 4th World Engineering Congress, Kuching, Sarawak. 32. A.R Hussein, N.A Abdul Jalil and A.R Abu Talib (2010), Effect of an Induced Heat and Vibration Frequency on the Deflection of a Simply Supported Rectangular, Proceedings 3rd Regional Conference on Noise, Vibration and Comfort, Putrajaya. 33. L.H. Abbud, A.R. Abu Talib, F. Mustapha, and A. Ali (2010), Ballistic Limit Behavior of Polymers Transparent Materials Under High Velocity Impact, Proceedings Conference on Aerospace and Mechanical Engineering, 4th World Engineering Congress, Kuching, Sarawak. 34. E. Gires, A.R. Abu Talib, M.T Ahmad, A. Idris, (2009), Review of Biodiesel as an Alternative Fuel for Aviation Purposes, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Kuala Lumpur. 35. M.T. Ahmad, M.R. Ajir, R. Varatharajoo, F. Mustapha, R. Zahari, A. R. Abu Talib, M.F Abdul Hamid, (2009), A Review on Bird Strike Capability on Service-Age Aircraft Canopy, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Kuala Lumpur. 36. L.H Abbud Al-Shably, A.R. Abu Talib, F. Mustapha, H. Tawfique and F.A. Najim, (2009), Experimental Investigation for the Behavior of Multi–Layered Target under Projectile Impact, Proceedings, National Physics Conference (PERFIK), Malacca. 37. A.A Hussein, A.R Abu Talib and N.M Adam, (2009), Numerical Simulation of Plain-Fin and Circular Tube Heat Exchanger under Frost Condition, Proceedings, The 10th Asian International Conference on Fluid Machinery (AICFM), Kuala Lumpur. 38. A.A Hussein, A.R Abu Talib and N.M Adam, (2009), Numerical Study of the Pressure Drop in a Plain-Fin and Circular Tube Heat Exchanger under Frost Condition, Proceedings, International Advanced Technology Congress (ATCi), PWTC, Kuala Lumpur. 39. S.W Zhang, A.R Abu Talib, A.S Mokhtar and S.M Mustapa Kamal (2009) Design Improvement in Vacuum Cooling System, Proceedings, FEIIC International Engineering Convention (InTEC), Damascus, Syria. 40. H.R Mohd Saiah, A.R Abu Talib, N. Abdullah, N.A Abdul Jalil and A.S Mokhtar (2008), Experimental Investigation of Fast Response Heater for Transient Heat Transfer Application, Proceedings, International Conference on Mechanical & Manufacturing Engineering (ICME), Johor Bahru, Malaysia. 41. N. Abdullah, A.R Abu Talib, H.R Mohd Saiah, A.A Jaafar, M.A Mohd Salleh, (2008) Estimation of Film Thickness of Thermochromic Liquid Crystals in Temperature Measurement Applications, Proceedings, International Conference on Mechanical & Manufacturing Engineering (ICME), Johor Bahru, Malaysia. 42. A.Z Bakar, A.Z. Mokhtar, A.R Abu Talib and M.T Ahmad (2008) Scaled of Skyhawk A-4 and Control Analysis in an Open Loop systems, Proceedings, National Seminar on Engineering and Technopreneurship (NSET), Kuala Lumpur, Malaysia. 43. A.R Abu Talib, K.S Ajeet Singh, H.R Mohd Saiah and N. Abdullah (2008) Numerical Modelling on the Effects of Blowing Ratio on Turbine Film Cooling Performance, Proceedings, Symposium of Engineering and Technology (SET), Kuching, Malaysia. 44. M.F Abdul Hamid, A.R Abu Talib and A.S. Mohd Rafie, (2008) Preliminary Velocity Measurement from a Gun Tunnel using a High Speed Camera, Proceedings, Symposium of Engineering and Technology (SET), Kuching, Malaysia. 45. N. Abdullah, A.R. Abu Talib, A.A. Jaafar, H.R. Mohd Saiah and M.A. Mohd Salleh (2007) Development of a Graphical User Interface (GUI) For Processing Images in Thermochromic Liquid Crystal Calibration, Proceedings, 8 (Updated Feb 2018) National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 121-127 (Best Paper Award) 46. A.A. Jaafar, A.R. Abu Talib, Mokhtar A.S. and Sapuan S.M. (2007) Numerical Predictions of Flow Fields in a Model of Air Conditioning Aircraft Cabin, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 158-164. 47. A.S Mokhtar, H.S Sultan, A.R Abu Talib, N.M.A Nik Long and N. Jamaluddin (2007) Study on Optimization of Composite Conical Structures for Crashworthiness Application, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 65-70. 48. A.R Abu Talib, A.A Jaafar, N.A Abdul Jalil and A.S Mokhtar (2007) Flow Measurements Downstream of an Axial Flow Fan Inside an Outdoor Air Conditioning Unit, Proceedings, FEIIC International Engineering Convention, Jeddah, Saudi Arabia, Intec07-076, pp. 638-650. 49. B. Mohd Nasir, A.R Abu Talib, A.S Mokhtar and M.F Zainuddin (2007) The Role of Engineers in Dakwah: A Malaysian Experience, Proceedings, FEIIC International Engineering Convention, Jeddah, Saudi Arabia, Intec07- 089, pp. 689-694. 50. A.S. Mokhtar, Hakim S. Sultan, M.K. Abdullah, E. Mahdi, A.R Abu Talib and A. M. S. Hamouda (2007) Numerical Investigations Into The Crushing Behaviour of Conical Shell System, FEIIC International Engineering Convention, Jeddah, Saudi Arabia, Intec07-088, pp. 695-704. 51. A.R Abu Talib, A.A Jaafar, A.S Mokhtar and A.H Razali (2007) Significance of Solar Radiation on Aircraft Engine under Cowl Temperature, Proceedings, ASME Turbo Expo, Montreal, Canada, GT2007-28048. (Scopus Index) 52. A.R Abu Talib, M.R Osman, A.G.L Abdullah, S. Abdul Rashid, N.K Noordin, N. Megat Johari, M.J Megat Mohd Noor and A.A Abang Ali (2007) A Review of France Professional Development for Engineers, Engineering Technologists and Technicians, Proceedings, World Engineering Congress - Mechanical and Aerospace Engineering Conference, Penang, Malaysia, pp. 274-279. 53. A.R Abu Talib, M.R Osman, A.G.L Abdullah, S. Abdul Rashid, N.K Noordin, N. Megat Johari, M.J Megat Mohd Noor and A.A Abang Ali (2007) The Professional Development of Engineering Team in Germany, Proceedings, World Engineering Congress - Mechanical and Aerospace Engineering Conference, Penang, Malaysia, pp. 280- 288. 54. M.A Azlan, M.F Mohideen Batcha and A.R Abu Talib (2007) Design of a CVT Lubricant Test Device Apparatus, Proceedings, Conference on Applications and Design in Mechanical Engineering, Kangar, Perlis, Malaysia. 55. G. Goudah, E. Mahdi, A.R. Abu Talib, A.S. Mokhtar and R. Yunus (2006) Automobile Compression Composite Elliptic Spring, Proceedings, FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 242-248. 56. M.A. Badie, E. Mahdi, A.R. Abu Talib, E.J. Abdullah and R. Yunus (2006) Design and Analysis of a Hybrid Composite Drive Shaft for Automotive Applications, Proceedings, FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 511-517. 57. A.A. Jaafar, A.R. Abu Talib, I. Abdul Rahim, M.N. Fillipski and S.M. Sapuan (2006) Development of a Testing Facility for Modelling Cooling Technique, Proceedings, FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 108-116. 58. A.R Abu Talib, A.A Jaafar, A.S Mokhtar, I. Abd. Rahim and M.S Abdul Karim (2006) Effects of Blowing Ratio on the Heat Transfer Coefficient Distribution Downstream of a Single Film Cooling Hole, Proceedings, FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 425-434. 59. M.K Abdullah, A.R Abu Talib, N.R Mohd Suradi, A.S Mokhtar, N. Jamaluddin and M.F Zainuddin (2006) K-Chart: Research Planning and Monitoring Tool for Engineering and Technology Applications, Proceedings, FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 180-185. 60. A.R Abu Talib, P.T Ireland, A.J Neely and A.J Mullender (2005) Numerical Simulation of a Standard Fire-Test on a Flat Plate, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 79-88. 61. A.S Mokhtar, E. Mahdi, M.R Ajir and A.R Abu Talib (2005) Crushing and Energy Abrosption Behaviour of Axially Loaded Natural Composite Tubes, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 61-66. 62. A.A Jaafar, A.R Abu Talib, X. Gan, M. Wilson and J.M Owen (2005) Flow in a Rotating Cavity with Peripheral Flows, Proceedings, National Symposium: Aerospace Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 115-119. 63. A.A Jaafar, A.R Abu Talib, A.S Mokhtar, I Abd.Rahim, P.R Arora and M.M.H Megat Ahmad (2005) Combined Experimental and Numerical Investigation on a Film Cooling Flow over a Flat Surface, Proceedings, National 9 (Updated Feb 2018) Conference on Advances in Mechanical Engineering, Kuala Lumpur, Malaysia. 64. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) Detailed Investigation of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner Compared to Levels Derived From a Low-Temperature Analogue Burner, Proceedings, ASME Turbo Expo, Atlanta, USA, GT2003-30196. (Scopus Index) 65. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) A Novel Liquid Crystal Image Processing Technique Using Multiple Gas Temperature Steps To Determine Heat Transfer Coefficient Distribution And Adiabatic Wall Temperature, Proceedings, ASME Turbo Expo, Atlanta, USA, GT2003-38198. (Scopus Index) 66. A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2001) Compact Low-Temperature Analogue of Aero Engine Fire-Certification Burner, Proceedings, ASME Turbo Expo, New Orleans, USA, 2001-GT-0364. 67. A.J Neely, A.R Abu Talib, P.T Ireland and A.J Mullender (2000) Development of Low-Temperature Fire-Event Modeling Technique, Proceedings, International Congress of Aeronautical Science, Harrogate, UK. Books 1. N.K Noordin, R. Wagiran, M.F A. Rasid, A.R Abu Talib, F. Hashim, and M.I Saripan, Malaysian Quality Evaluation System for Private Colleges: MyQUEST 2016/2017, Kementerian Pengajian Tinggi, ISBN: 978-983-2408-58-1 2. M.A Abdul Rahman, M.S Jaafar, A.R Abu Talib, F Sufar, F. Hashim, K.N Mustapha, M.I Saripan, M.J Megat Mohd Noor, M.F A. Rasid, N.A Shairi, N.K Noordin, R. Wagiran, R. Razali, S. Mohamad, S. Abdul Talib, and Y. V. Muniandy, MyQUEST USER MANUAL (Version 01:2017), Kementerian Pengajian Tinggi, ISBN: 978-983-2408-50-5 3. M.R Baharudin, A. Arshad, M.K Tahir, N.K Noordin and A.R Abu Talib, Garis Panduan Pengurusan Risiko UPM, ISBN 978-967-3446-92-6. Penerbit UPM, 2017. 4. M.A Abdul Rahman, M.S Jaafar, A.R Abu Talib, F. Hashim, K.N Mustapha, M.I Saripan, M.J Megat Mohd Noor, M.F A. Rasid, N. Yaakob, N.H Mat Salleh, N.A Shairi, N.K Noordin, R. Wagiran, R. Razali, S. Mohamad, S. Abdul Talib, and Y. V. Muniandy, Malaysian Quality Evaluation System for Private Colleges MyQUEST 2014/2015, Kementerian Pengajian Tinggi, ISBN: 987-983-2408-34-5, 2015. 5. K. Zainal, A.R Abu Talib, and I. Hack, Malaysian Aerospace Industry Blueprint 2030, Malaysian Industry- Government Group for High Technology (MIGHT), ISBN: 978-967-11818-6-7, 2015. (POLICY PAPER) 6. A.R Abu Talib and N. Nordin, New Paradigm for Sustainable Human Capital Development, MIGHT-METEOR Advanced Manufacturing, ISBN: 978-967-12475-0-1, 2014. 7. A.R Abu Talib and N. Abdullah, Innovation Methodology, Penerbit UPM, ISBN: 978-967-3443-50-5, 2013. 8. S.H Tapsir, M.A Abdul Rahman, M.S Jaafar, S. Mohamad, K.N Mustapha, S. Abdul Talib, N.K Noordin, M.J Megat Mohd Noor, A.R Abu Talib, R. Wagiran, M.I Saripan, Malaysian Quality Evaluation System for Private Colleges MyQUEST 2010/2011, Kementerian Pengajian Tinggi, ISBN: 978-967-0334-05-9. 9. A.R Abu Talib et. al, Hala Tuju Program Aeroangkasa, Institusi Pengajian Tinggi Awam 2010-2020, Jabatan Pengajian Tinggi, Kementerian Pengajian Tinggi Malaysia, Putrajaya, ISBN 978-983-3663-43-9. Penerbit UPM, 2010. (POLICY PAPER) Proceedings 1. R. Wagiran, A.G.L Abdullah, N.K Noordin, S Abdul Rashid, M.I Saripan, A.R Abu Talib, T.A Mohammed and M.J Megat Mohd Noor, Proceedings, International Engineering Convention, Damascus, Syria, ISBN 978-983-43571-5- 3. FEIIC, 2009. 2. R. Wagiran, A.G.L Abdullah, S. Abdul Rashid, A.R Abu Talib, N.K Noordin and M.J Megat Mohd Noor, Proceedings, FEIIC Seminar on Engineering and Technology, Kuching, Malaysia. ISBN 983-41705-3-X. FEIIC, 2008. 3. S. Abdul Rashid, A.G.L Abdullah, A.R Abu Talib, R. Wagiran, A. Abdul Aziz, N.K Nordin, M.R Osman and M.J Megat Mohd Noor, Proceedings, International Engineering Convention, Jeddah, Saudi Arabia, ISBN 978-983- 41705-4-7, FEIIC, 2007. 4. A.S Mokhtar, E.J Abdullah, N.M Adam, A.R Abu Talib, N.A Abdul Jalil, R. Zahari, W.M.I Hassan and Z.A Zulkefli, Proceedings, World Engineering Congress, Mechanical and Aerospace Engineering Conference, Penang, Malaysia, ISBN 978-983-43571-1-5, FEIIC, 2007. 5. A.R Abu Talib, A.G.L Abdullah, R. Wagiran, S. Abdul Rashid, M.R Osman and M.J Megat Mohd Noor, Proceedings, FEIIC Seminar on Engineering and Technology, Putrajaya, Malaysia. ISBN 983-41705-3-X. FEIIC, 2006. 10 (Updated Feb 2018)