iPhone 13 Pro Repair Manual © 2022 Apple Inc. All rights reserved. iPhone 13 Pro Contents Contents 3 Introduction Basics 6 Internal View 7 Orderable Parts 9 Screws 10 Tools Safety 15 Battery Safety 18 Broken Glass Procedures 20 First Steps 21 SIM Tray 22 Display 50 Bottom Speaker 55 Camera 62 Taptic Engine 66 Battery © 2022 Apple Inc. All rights reserved. 073-00324-A | 2 iPhone 13 Pro Introduction Introduction This manual includes technical instructions for replacing genuine Apple parts in iPhone and is intended for individual technicians with the knowledge, experience, and tools required to repair electronic devices. Important • Read the entire manual first. If you’re not comfortable performing the repairs as instructed in this manual, don’t proceed. • Always use the latest version of this document available at support.apple.com/manuals/ repair+manual. Warning • Failure to follow the repair instructions or to use genuine Apple parts or proper tools may cause fire or other safety issues and lead to personal injury or death. • iPhone 7 and later are classified as Class 1 Laser products per IEC 60825-1 Ed. 3. These devices comply with 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. These devices contain one or more lasers. Use other than as described in the user guide, repair, or disassembly may cause damage, which could result in hazardous exposure to infrared laser emissions that are not visible. Caution Failure to follow the repair instructions or to use genuine Apple parts or proper tools may damage the iPhone, parts, or other property, or compromise the device’s functionality or water resistance. Warranty information Damage caused by repairs performed outside of Apple or the Apple Authorized Service network is not covered by Apple’s warranty or AppleCare plans. Such damage may cause future repairs to be subject to out-of-warranty costs or render the device ineligible for future repairs by Apple or Apple Authorized Service Providers. © 2022 Apple Inc. All rights reserved. 073-00324-A | 3 iPhone 13 Pro Introduction Tools and parts Hardware tools Apple tools are designed to apply the appropriate heat, force, and torque during repairs, and to withstand high-volume professional use. • The heated display removal fixture softens adhesive to allow separation of the display from the enclosure. The fixture is used with a heated display pocket designed for the device’s specific dimensions. • The display press applies the appropriate amount of pressure to secure new adhesive during display installation. The display press is used with a repair tray and display adhesive press plate designed for the device’s specific dimensions. • The battery press applies the appropriate amount of pressure to secure new adhesive during battery installation. The battery press is used with a repair tray designed for the device’s specific dimensions. Ordering tools and parts You can learn how to order genuine Apple parts and tools at support.apple.com/self-service-repair. During the purchase process, enter the manual ID RENLTC to indicate that you’ve read this manual in its entirety and agree that you have the knowledge and experience to perform your intended repair. Software tools A System Configuration step may be required at the end of your repair. System Configuration is a postrepair software tool that completes the repair for genuine Apple parts. Running System Configuration has a number of purposes that vary based on the part replaced. What System Configuration does Why it’s important Transfers factory Certain parts like displays, cameras, and ambient light sensors have calibration calibration values values that are customized to each individual part during manufacturing. Transferring these values ensures maximum performance and quality after a repair. Links Secure After repair of a logic board or a biometric authentication part (Touch ID or Element and Face ID), linking the biometric sensors to the Secure Enclave on the logic board biometric is required to ensure device security. authentication parts Ensures repair After a hardware repair, software checks are performed to ensure repair integrity. integrity Repair integrity means that a genuine Apple part has been correctly installed. Assigns wireless To comply with regional communications regulations, a wireless region must be region assigned to your logic board. Updates firmware Keeping firmware up to date ensures that the device has all the latest security and performance features. © 2022 Apple Inc. All rights reserved. 073-00324-A | 4 iPhone 13 Pro Introduction System Configuration requires a strong Wi-Fi network capable of 1.0 Mbps download and upload speeds, with less than 400 ms latency and less than 2% packet loss. Estimated data usage to run System Configuration is 6–22 MB. The device must be running the latest version of iOS and not a beta version. Learn how to initiate the System Configuration process at support.apple.com/self-service-repair. Alerts Failure to follow alerts could result in fire, injury, data loss, or damage to the device, parts, or other property. Warning Instructions for reducing risk of personal injury Caution Instructions for reducing risk of data loss or device hardware damage Supplemental information for successfully completing procedures; Important neither a Warning nor a Caution © 2022 Apple Inc. All rights reserved. 073-00324-A | 5 iPhone 13 Pro Internal View Internal View 1. Top speaker 11. Taptic Engine 2. TrueDepth camera assembly 12. SIM reader 3. Cameras 13. Battery connector 4. Camera flex cable 14. Display/Multi-Touch connector 5. Top battery adhesive tab 15. Dock flex cable 6. Battery 16. Logic board cowling 7. Bottom battery adhesive tabs 17. Logic board 8. Bottom speaker 18. Ambient light/proximity sensor connector 9. Lightning connector 19. Grounding strap 10. Bottom microphones © 2022 Apple Inc. All rights reserved. 073-00324-A | 6 iPhone 13 Pro Orderable Parts Orderable Parts Name Numbers Screws Battery 661-21996 — Bottom speaker 923-06256 923-06273 (1) lower right 923-06275 (1) upper left 923-06276 (2) lower left, upper right Camera 661-22293 — Camera cowling 923-06290 923-06266 (1) middle 923-06267 (1) upper right 923-06268 (3) left, lower left, lower right Display 661-21993 — LL661-21993 (U.S.) Display adhesive 923-06628 — Lower cowling 923-06289 923-06265 (3) Rubber gasket 923-06278 — Security screws 923-06633 (2) graphite 923-06872 (2) silver 923-06873 (2) gold 923-06874 (2) sierra blue 923-07197 (2) alpine green SIM tray 923-06646 dual, graphite — 923-06908 single, graphite 923-06909 single, silver 923-06910 single, gold 923-06911 single, sierra blue 923-06913 dual, silver 923-06914 dual, gold 923-06915 dual, sierra blue 923-07195 dual, alpine green 923-07196 single, alpine green © 2022 Apple Inc. All rights reserved. 073-00324-A | 7 iPhone 13 Pro Orderable Parts Name Numbers Screws Taptic Engine 923-06258 923-06263 (1) left 923-06280 (1) lower middle 923-06281 (1) right (super screw) Upper cowling 923-06288 923-06273 (1) upper left 923-06283 (1) upper right 923-06285 (2) lower left, lower right © 2022 Apple Inc. All rights reserved. 073-00324-A | 8 iPhone 13 Pro Screws Screws Warning • Never reinstall a screw after it has been removed. Install only new screws. iPhone screw grooves are covered in adhesive that can’t be reused. • Use only the torque driver indicated to install new screws during reassembly. Both overtightened screws and loose screws can damage parts. Note: You can use any torque driver to remove screws. 923-06267 923-06273 923-06266 923-06283 923-06268 923-06285 923-06265 923-06265 923-06275 923-06281 923-06263 923-06276 923-06273 923-06280 923-06633 923-06872 923-06873 923-06874 923-07197 Torque driver (black, 0.35 kgf cm) Crosshead screw Single screw Torque driver (blue, 0.65 kgf cm) Super screw Screw with super screw underneath Torque driver (gray, 0.55 kgf cm) Trilobe screw Torque driver (green, 0.45 kgf cm) Security screw *A super screw has a threaded hole that holds another screw. © 2022 Apple Inc. All rights reserved. 073-00324-A | 9 iPhone 13 Pro Tools Tools Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers. 923-06848 923-04878 661-19620 6.1-inch back protective cover 6.1-inch display protective 6.1-inch heated display cover pocket 923-06596 923-01092 923-02657 6.1-inch repair tray Adhesive cutter Battery press 923-06600 661-08916 Cut-resistant gloves Display adhesive press plate Display press © 2022 Apple Inc. All rights reserved. 073-00324-A | 10