IntroductIon to Petroleum engIneerIng IntroductIon to Petroleum engIneerIng John r. FanchI and rIchard l. chrIstIansen Copyright © 2017 by John Wiley & Sons, Inc. All rights reserved Published by John Wiley & Sons, Inc., Hoboken, New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per‐copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750‐8400, fax (978) 750‐4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748‐6011, fax (201) 748‐6008, or online at http://www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information on our other products and services or for technical support, please contact our Customer Care Department within the United States at (800) 762‐2974, outside the United States at (317) 572‐3993 or fax (317) 572‐4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic formats. For more information about Wiley products, visit our web site at www.wiley.com. Library of Congress Cataloging‐in‐Publication Data: Names: Fanchi, John R., author. | Christiansen, Richard L. (Richard Lee), author. Title: Introduction to petroleum engineering / by John R. Fanchi and Richard L. Christiansen. Description: Hoboken, New Jersey : John Wiley & Sons, Inc., [2017] | Includes bibliographical references and index. Identifiers: LCCN 2016019048| ISBN 9781119193449 (cloth) | ISBN 9781119193647 (epdf) | ISBN 9781119193616 (epub) Subjects: LCSH: Petroleum engineering. Classification: LCC TN870 .F327 2017 | DDC 622/.3382–dc23 LC record available at https://lccn.loc.gov/2016019048 Printed in the United States of America 10 9 8 7 6 5 4 3 2 1 Contents About the Authors xiii Preface xv About the Companion Website xvi 1 Introduction 1 1.1 What is Petroleum Engineering? 1 1.1.1 Alternative Energy Opportunities 3 1.1.2 Oil and Gas Units 3 1.1.3 Production Performance Ratios 4 1.1.4 Classification of Oil and Gas 4 1.2 Life Cycle of a Reservoir 6 1.3 Reservoir Management 9 1.3.1 Recovery Efficiency 9 1.4 Petroleum Economics 11 1.4.1 The Price of Oil 14 1.4.2 How Does Oil Price Affect Oil Recovery? 14 1.4.3 How High Can Oil Prices Go? 15 1.5 Petroleum and the Environment 16 1.5.1 Anthropogenic Climate Change 16 1.5.2 Environmental Issues 19 1.6 Activities 20 1.6.1 Further Reading 20 1.6.2 True/False 21 1.6.3 Exercises 21 vi COnTEnTs 2 the Future of energy 23 2.1 Global Oil and Gas Production and Consumption 23 2.2 Resources and Reserves 24 2.2.1 Reserves 27 2.3 Oil and Gas Resources 29 2.3.1 Coal Gas 29 2.3.2 Gas Hydrates 31 2.3.3 Tight Gas sands, shale Gas, and shale Oil 31 2.3.4 Tar sands 33 2.4 Global Distribution of Oil and Gas Reserves 34 2.5 Peak Oil 36 2.5.1 World Oil Production Rate Peak 37 2.5.2 World Per Capita Oil Production Rate Peak 37 2.6 Future Energy Options 39 2.6.1 Goldilocks Policy for Energy Transition 39 2.7 Activities 42 2.7.1 Further Reading 42 2.7.2 True/False 42 2.7.3 Exercises 42 3 Properties of Reservoir Fluids 45 3.1 Origin 45 3.2 Classification 47 3.3 Definitions 51 3.4 Gas Properties 54 3.5 Oil Properties 55 3.6 Water Properties 60 3.7 sources of Fluid Data 61 3.7.1 Constant Composition Expansion 61 3.7.2 Differential Liberation 62 3.7.3 separator Test 62 3.8 Applications of Fluid Properties 63 3.9 Activities 64 3.9.1 Further Reading 64 3.9.2 True/False 64 3.9.3 Exercises 64 4 Properties of Reservoir Rock 67 4.1 Porosity 67 4.1.1 Compressibility of Pore Volume 69 4.1.2 saturation 70 4.1.3 Volumetric Analysis 71 COnTEnTs vii 4.2 Permeability 71 4.2.1 Pressure Dependence of Permeability 73 4.2.2 superficial Velocity and Interstitial Velocity 74 4.2.3 Radial Flow of Liquids 74 4.2.4 Radial Flow of Gases 75 4.3 Reservoir Heterogeneity and Permeability 76 4.3.1 Parallel Configuration 76 4.3.2 series Configuration 76 4.3.3 Dykstra–Parsons Coefficient 77 4.4 Directional Permeability 79 4.5 Activities 80 4.5.1 Further Reading 80 4.5.2 True/False 80 4.5.3 Exercises 80 5 Multiphase Flow 83 5.1 Interfacial Tension, Wettability, and Capillary Pressure 83 5.2 Fluid Distribution and Capillary Pressure 86 5.3 Relative Permeability 88 5.4 Mobility and Fractional Flow 90 5.5 One‐dimensional Water-oil Displacement 91 5.6 Well Productivity 95 5.7 Activities 97 5.7.1 Further Reading 97 5.7.2 True/False 97 5.7.3 Exercises 98 6 Petroleum Geology 101 6.1 Geologic History of the Earth 101 6.1.1 Formation of the Rocky Mountains 106 6.2 Rocks and Formations 107 6.2.1 Formations 108 6.3 sedimentary Basins and Traps 111 6.3.1 Traps 111 6.4 What Do You need to form a Hydrocarbon Reservoir? 112 6.5 Volumetric Analysis, Recovery Factor, and EUR 113 6.5.1 Volumetric Oil in Place 114 6.5.2 Volumetric Gas in Place 114 6.5.3 Recovery Factor and Estimated Ultimate Recovery 115 6.6 Activities 115 6.6.1 Further Reading 115 6.6.2 True/False 116 6.6.3 Exercises 116 viii COnTEnTs 7 Reservoir Geophysics 119 7.1 seismic Waves 119 7.1.1 Earthquake Magnitude 122 7.2 Acoustic Impedance and Reflection Coefficients 124 7.3 seismic Resolution 126 7.3.1 Vertical Resolution 126 7.3.2 Lateral Resolution 127 7.3.3 Exploration Geophysics and Reservoir Geophysics 128 7.4 seismic Data Acquisition, Processing, and Interpretation 129 7.4.1 Data Acquisition 129 7.4.2 Data Processing 130 7.4.3 Data Interpretation 130 7.5 Petroelastic Model 131 7.5.1 IFM Velocities 131 7.5.2 IFM Moduli 132 7.6 Geomechanical Model 133 7.7 Activities 135 7.7.1 Further Reading 135 7.7.2 True/False 135 7.7.3 Exercises 135 8 Drilling 137 8.1 Drilling Rights 137 8.2 Rotary Drilling Rigs 138 8.2.1 Power systems 139 8.2.2 Hoisting system 141 8.2.3 Rotation system 141 8.2.4 Drill string and Bits 143 8.2.5 Circulation system 146 8.2.6 Well Control system 148 8.3 The Drilling Process 149 8.3.1 Planning 149 8.3.2 site Preparation 150 8.3.3 Drilling 151 8.3.4 Open‐Hole Logging 152 8.3.5 setting Production Casing 153 8.4 Types of Wells 155 8.4.1 Well spacing and Infill Drilling 155 8.4.2 Directional Wells 156 8.4.3 Extended Reach Drilling 158 8.5 Activities 158 8.5.1 Further Reading 158 8.5.2 True/False 158 8.5.3 Exercises 159 COnTEnTs ix 9 Well Logging 161 9.1 Logging Environment 161 9.1.1 Wellbore and Formation 162 9.1.2 Open or Cased? 163 9.1.3 Depth of Investigation 164 9.2 Lithology Logs 164 9.2.1 Gamma‐Ray Logs 164 9.2.2 spontaneous Potential Logs 165 9.2.3 Photoelectric Log 167 9.3 Porosity Logs 167 9.3.1 Density Logs 167 9.3.2 Acoustic Logs 168 9.3.3 neutron Logs 169 9.4 Resistivity Logs 170 9.5 Other Types of Logs 174 9.5.1 Borehole Imaging 174 9.5.2 spectral Gamma‐Ray Logs 174 9.5.3 Dipmeter Logs 174 9.6 Log Calibration with Formation samples 175 9.6.1 Mud Logs 175 9.6.2 Whole Core 175 9.6.3 sidewall Core 176 9.7 Measurement While Drilling and Logging While Drilling 176 9.8 Reservoir Characterization Issues 177 9.8.1 Well Log Legacy 177 9.8.2 Cutoffs 177 9.8.3 Cross‐Plots 178 9.8.4 Continuity of Formations between Wells 178 9.8.5 Log suites 179 9.8.6 scales of Reservoir Information 180 9.9 Activities 182 9.9.1 Further Reading 182 9.9.2 True/False 182 9.9.3 Exercises 182 10 Well Completions 185 10.1 skin 186 10.2 Production Casing and Liners 188 10.3 Perforating 189 10.4 Acidizing 192 10.5 Hydraulic Fracturing 193 10.5.1 Horizontal Wells 201 10.6 Wellbore and surface Hardware 202 x COnTEnTs 10.7 Activities 203 10.7.1 Further Reading 203 10.7.2 True/False 203 10.7.3 Exercises 204 11 Upstream Facilities 205 11.1 Onshore Facilities 205 11.2 Flash Calculation for separators 208 11.3 Pressure Rating for separators 211 11.4 single‐Phase Flow in Pipe 213 11.5 Multiphase Flow in Pipe 216 11.5.1 Modeling Multiphase Flow in Pipes 217 11.6 Well Patterns 218 11.6.1 Intelligent Wells and Intelligent Fields 219 11.7 Offshore Facilities 221 11.8 Urban Operations: The Barnett shale 224 11.9 Activities 225 11.9.1 Further Reading 225 11.9.2 True/False 225 11.9.3 Exercises 225 12 transient Well testing 227 12.1 Pressure Transient Testing 227 12.1.1 Flow Regimes 228 12.1.2 Types of Pressure Transient Tests 228 12.2 Oil Well Pressure Transient Testing 229 12.2.1 Pressure Buildup Test 232 12.2.2 Interpreting Pressure Transient Tests 235 12.2.3 Radius of Investigation of a Liquid Well 237 12.3 Gas Well Pressure Transient Testing 237 12.3.1 Diffusivity Equation 238 12.3.2 Pressure Buildup Test in a Gas Well 238 12.3.3 Radius of Investigation 239 12.3.4 Pressure Drawdown Test and the Reservoir Limit Test 240 12.3.5 Rate Transient Analysis 241 12.3.6 Two‐Rate Test 242 12.4 Gas Well Deliverability 242 12.4.1 The sBA Method 244 12.4.2 The LIT Method 245 12.5 summary of Transient Well Testing 246 12.6 Activities 246 12.6.1 Further Reading 246 12.6.2 True/False 246 12.6.3 Exercises 247