EN 301 152-1 Draft V1.1.1 (1998-01) European Standard (Telecommunications series) Intelligent Network (IN); IN Capability Set 1 (CS1) extension; Intelligent Network Application Protocol (INAP); Customised Applications for Mobile network Enhanced Logic (CAMEL); Part 1: Protocol specification European Telecommunications Standards Institute 2 Draft EN 301 152-1 V1.1.1 (1998-01) Reference DEN/SPS-03052-1 (ao090ico.PDF) Keywords IN, INAP, ISDN, mobile, protocol ETSI Secretariat Postal address F-06921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 X.400 c= fr; a=atlas; p=etsi; s=secretariat Internet [email protected] http://www.etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 1998. All rights reserved. 3 Draft EN 301 152-1 V1.1.1 (1998-01) Contents Intellectual Property Rights................................................................................................................................5 Foreword............................................................................................................................................................5 1 Scope........................................................................................................................................................6 2 References................................................................................................................................................6 2.1 Normative references.........................................................................................................................................6 2.2 Informative references.......................................................................................................................................7 3 Abbreviations...........................................................................................................................................7 4 General.....................................................................................................................................................7 4.1 Definition methodology.....................................................................................................................................7 4.4 INAP addressing................................................................................................................................................8 4.4.2 Quality of service parameters.......................................................................................................................8 6 Additional abstract syntax........................................................................................................................8 6.1 Operation types..................................................................................................................................................8 6.3 Data types..........................................................................................................................................................8 6.5 Application contexts........................................................................................................................................10 6.6 Classes.............................................................................................................................................................10 8 Error procedures.....................................................................................................................................11 8.1 Operation related error procedures..................................................................................................................11 8.1.6 MissingCustomerRecord............................................................................................................................11 8.1.6.2 Operations SSF->SCF..........................................................................................................................11 8.1.7 MissingParameter.......................................................................................................................................11 8.1.7.3 Operations SSF -> SCF........................................................................................................................11 8.2 Entity related error procedures.........................................................................................................................11 8.2.1 Expiration of TSSF....................................................................................................................................11 8.2.1.2 Procedures SSF->SCF..........................................................................................................................11 9 Detailed operation procedures...............................................................................................................11 9.11 Connect procedure...........................................................................................................................................11 9.11.1 General description....................................................................................................................................11 9.11.1.1 Parameters............................................................................................................................................11 9.11.3 Responding entity (SSF)............................................................................................................................12 9.11.3.1 Normal procedure.................................................................................................................................12 9.17 EventReportBCSM procedure.........................................................................................................................12 9.17.2 Invoking entity (SSF).................................................................................................................................12 9.17.2.1 Normal procedure.................................................................................................................................12 9.17.2.2 Error handling.......................................................................................................................................12 9.19 InitialDP procedure..........................................................................................................................................12 9.19.1 General description....................................................................................................................................12 9.19.1.1 Parameters............................................................................................................................................12 9.19.2 Invoking entity (SSF).................................................................................................................................13 9.19.2.2 Error handling.......................................................................................................................................13 9.23 ReleaseCall procedure.....................................................................................................................................13 9.23.1 General description....................................................................................................................................13 9.25 RequestReportBCSMEvent procedure............................................................................................................13 9.25.1 General description....................................................................................................................................13 9.25.1.1 Parameters............................................................................................................................................14 10 Services assumed from TCAP...............................................................................................................14 10.9 Mapping on to TC services..............................................................................................................................14 10.9.1 Dialogue control.........................................................................................................................................14 10.9.1.8 Quality of service..................................................................................................................................14 4 Draft EN 301 152-1 V1.1.1 (1998-01) Annex A (normative): Mapping between INAP and ISUP..............................................................15 A.1 InitialDP operation.................................................................................................................................15 A.2 Connect operation..................................................................................................................................15 A.2.1 Connect operation............................................................................................................................................16 A.3 ReleaseCall operation............................................................................................................................16 History..............................................................................................................................................................17 5 Draft EN 301 152-1 V1.1.1 (1998-01) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://www.etsi.fr/ipr). Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on http://www.etsi.fr/ipr) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS), and is now submitted for the Public Enquiry phase of the ETSI standards Two-step Approval Procedure (TAP). The present document is part 1 of a multi-part standard covering the IN Capability Set 1 (CS1) extension; Intelligent Network Application Protocol (INAP); Customised Applications for Mobile network Enhanced Logic (CAMEL) as described below: Part 1: "Protocol specification"; Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification". NOTE: Further parts of the present document may be identified later. Proposed national transposition dates Date of latest announcement of this EN (doa): 3 months after ETSI publication Date of latest publication of new National Standard or endorsement of this EN (dop/e): 6 months after doa Date of withdrawal of any conflicting National Standard (dow): 6 months after doa 6 Draft EN 301 152-1 V1.1.1 (1998-01) 1 Scope This fist part of EN 301 152 specifies the additions for Intelligent Network Application Protocol (INAP) to support the Camel Phase 1 Capability. The present document is based on ETS 300 374-1 [19]: "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) Core Intelligent Network Application Protocol (INAP)". ETS 300 374-1 [19] is also taken as an editorial basis for the present document. Only additions and modifications in respect to that ETS are specified in the present document. For Customized Applications for Mobile network Enhanced Logic (CAMEL) only a restricted subset of the protocol aspects of ETS 300 374-1 [19] is necessary. This restriction is not defined in the present document. A profiling of CAMEL, i.e. which protocol aspects are used, is given by EN 301 152-2 [31]. Clauses and subclauses of ETS 300 374-1 [19] for which neither additions nor modifications are made do not appear in the present document. However, to ensure the same clause numbering of the present document as of ETS 300 374-1 [19], deleted clauses and subclauses are numbered implicitly. As the present document specifies the additions in respect to the SSF it is assumed that the SCF is according to ETS 300 374-1 [19] taking into account the requirements defined in the present document for the SSF. The protocol specification of the CAMEL Capability to the present document is considered as equivalent to GSM 09.78 [28]. 2 References References may be made to: a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in which case, subsequent revisions to the referenced document do not apply; or b) all versions up to and including the identified version (identified by "up to and including" before the version identity); or c) all versions subsequent to and including the identified version (identified by "onwards" following the version identity); or d) publications without mention of a specific version, in which case the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 2.1 Normative references The date of the following reference has been modified: [11] ITU-T Recommendation Q.1218 (1995): "Interface Recommendation for intelligent network CS1". The following references are in addition to those of ETS 300 374-1 [19]. [19] ETS 300 374-1 (1994): "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core Intelligent Network Application Protocol (INAP); Part 1: Protocol specification". [20] ETS 300 974: "Digital cellular telecommunications system (Phase 2+); Mobile Application Part (MAP) specification (GSM 09.02)". [21] ITU-T Recommendation Q.713 : "Signalling Connection Control Part formats and codes". [22] ITU-T Recommendation X.680 (1994) | ISO/IEC 8824-1 (1995): "Information technology – Abstract Syntax Notation One (ASN.1): Specification of basic notation [23] ITU-T Recommendation X.681 (1994) | ISO/IEC 8824-2 (1995): "Information technology – Abstract Syntax Notation One (ASN.1): Information object specification". 7 Draft EN 301 152-1 V1.1.1 (1998-01) [24] ITU-T Recommendation X.682 (1994) | ISO/IEC 8824-3 (1995): "Information technology – Abstract Syntax Notation One (ASN.1): Constraint specification". [25] ITU-T Recommendation X.683 (1994) | ISO/IEC 8824-4 (1995): "Information technology – Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications". [26] ITU-T Recommendation X.690 (1994) | ISO/IEC 8825-1 (1995): "Information technology – ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)". [27] ITU-T Recommendation X.880 (1994) | ISO/IEC 13712-1 (1995): "Information technology - Remote Operations: Concepts, model and notation". [28] TS 101 046 (V5.1): "Digital cellular telecommunications system (Phase 2+); Customized Applications for Mobile network Enhanced Logic (CAMEL); CAMEL Application Part (CAP) specification (GSM 09.78 version 5.1.0)". [29] ETS 300 646-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; Digital cellular telecommunications system (Phase 2); Application of ISDN User Part (ISUP) version 2 for the ISDN-Public Land Mobile Network (PLMN) signalling interface; Part 1: Protocol specification (GSM 09.12)". [30] ETS 300 940: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification (GSM 04.08)". 2.2 Informative references [31] EN 301 152-2 (V1.1): "Intelligent Network (IN); IN Capability Set 1 (CS1) extension; Intelligent Network Application Protocol (INAP); Customised Applications for Mobile network Enhanced Logic (CAMEL); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification". [32] TS 101 044 (V5.1) (1997, v5.1.0): "Digital cellular telecommunications system (Phase 2+); Customized Applications for Mobile network Enhanced Logic (CAMEL) - Stage 2 (GSM 03.78)". 3 Abbreviations For the purposes of the present document, the following abbreviations apply in addition to those of ETS 300 374-1 [19]: ACM Address Complete Message CAMEL Customized Applications for Mobile network Enhanced Logic CSI CAMEL Subscription Information IAM Initial Address Message MO Mobile Originating OCSI Originating CSI REL Release TCSI Terminating CSI Within the present document the terms gsmSSF and SSF and the terms gsmSCF and SCF respectively are used synonymously. 4 General 4.1 Definition methodology For the purpose of the present document, ITU-T Recommendations X.880 [27] and the ITU-T Recommendations for ASN.1 X.680 [22], X.681 [23], X.682 [24], X.683 [25] and X.690 [26] for the basic encoding rules apply. 8 Draft EN 301 152-1 V1.1.1 (1998-01) 4.4 INAP addressing 4.4.2 Quality of service parameters The class (class 0 or class 1) of SCCP is set as required by the application. NOTE: RESULT_NL should not be used. However, if segmentation is needed class 1 is set. NOTE: According to ETS 300 285 [5], TC imposes no limitation on the number of segments. However if the peer TC users are certain that the Network Service used supports segmentation and reassembly of user data, the TC_RESULT_NL (RR_NL) facility is not necessary and should be avoided. The return option may be used if requested by the application (Network Operator to determine). 6 Additional abstract syntax This clause specifies the additional abstract syntax, using ASN.1 as defined in CCITT Recommendation X.208 [14] and ITU-T Recommendations X.680 [22], X.681 [23], X.682 [24] and X.683 [25]. The encoding rules which are applicable to the defined abstract syntax are the Basic Encoding Rules for ASN.1, defined in CCITT Recommendation X.209 [15] and ITU-T Recommendation X.690 [26] with the restrictions as described in ITU-T Recommendation Q.773 [10], subclause 4.1.1, modified by ETS 300 287 [5]. Additional encodings are cited for parameters used in existing ISUP (ETS 300 356-1 [7]) and DSS1 (ETS 300 403-1 [8]) standards. Existing data types from the CS1 ETSI Core INAP (ETS 300 374-1 [19]) and MAP (ETS 300 974 [20]) standards have been used. NOTE: If this specification uses only a subtype, this will be indicated in EN 301 152-2 [31]. As for CS-2 in the following subclauses the ASN.1 extension marker "..." is not commented out. 6.1 Operation types Operation timers The following value ranges apply for operation specific timers: short: 1 to 20 seconds. 6.3 Data types -- The EXTENSION MACRO is replaced by the EXTENSION CLASS defined in subclause 6.6 Classes. -- However, the Criticality type remains. CriticalityType ::= ENUMERATED { ignore(0), abort(1) } -- This section contains additional type definitions. -- The following datatypes are imported. IMPORTS IMSI, Ext-BasicServiceCode FROM MAP-CommonDataTypes { ccitt(0) identified-organization(4) etsi(0) mobileDomain(0) gsm-Network(1) modules(3) map-CommonDataTypes(18) version3(3)} LocationInformation, SubscriberState 9 Draft EN 301 152-1 V1.1.1 (1998-01) FROM MAP-MS-DataTypes { ccitt(0) identified-organization(4) etsi(0) mobileDomain(0) gsm-Network(1) modules(3) map-MS-DataTypes(11) version3(3)} CallReferenceNumber, SuppressionOfAnnouncement FROM MAP-CH-DataTypes { ccitt(0) identified-organization(4) etsi(0) mobileDomain(0) gsm-Network(1) modules(3) map-CH-DataTypes(13) version3(3)}; ISDN-AddressString, FROM MAP-CommonDataTypes { ccitt identified-organization(4) etsi(0) mobileDomain(0) gsm-Network (1) modules (3) map-CommonDataTypes (18) version3 (3)}; -- Argument Data Types ConnectArg ::= SEQUENCE { genericNumbers [14] GenericNumbers OPTIONAL, -- The following components are included before the extension marker. suppressionOfAnnouncement [55] SuppressionOfAnnouncement OPTIONAL, oCSIApplicable [56] OCSIApplicable OPTIONAL, ... } InitialDPArg ::= SEQUENCE { -- The following components are included in addition before the extension marker. iMSI [50] IMSI OPTIONAL, subscriberState [51] SubscriberState OPTIONAL, locationInformation [52] LocationInformation OPTIONAL, ext-basicServiceCode [53] Ext-BasicServiceCode OPTIONAL, callReferenceNumber [54] CallReferenceNumber OPTIONAL, mscAddress [55] ISDN-AddressString OPTIONAL, calledPartyBCDNumber [56] CalledPartyBCDNumber OPTIONAL, ... } -- Common Data Types CalledPartyBCDNumber ::= OCTETT STRING (SIZE (minCalledPartyBCDNumberLength .. maxCalledPartyBCDNumberLength)) -- Indicates the Called Party Number, including service selection information. Refer to GSM 04.08 -- [30] for encoding. This data type carries only the "type of number", "numbering plan -- identification" and "number digit" fields defined in [30]; it does not carry the "called party -- BCD number IEI" or "length of called party BCD number contents". -- The Extensionfield type is defined as follows: ExtensionField ::= SEQUENCE { type EXTENSION.&id ({SupportedExtensions}), -- shall identify the value of an EXTENSION type criticality CriticalityType DEFAULT ignore, value [1]EXTENSION.&ExtensionType ({SupportedExtensions}{@type}) } -- This parameter indicates an extension of an argument data type. Its content is network operator -- specific GenericNumber ::= OCTET STRING (SIZE(minGenericNumberLength.. maxGenericNumberLength)) -- Indicates a generic number. Refer to ETS 300 356-1 [7] Generic number for encoding. GenericNumbers ::= SET SIZE(1..numOfGenericNumbers) OF GenericNumber OCSIApplicable ::= NULL -- Indicates that the OCSI, if present, shall be applied -- on the outgoing call leg created with a Connect operation. -- Definition of range constants -- The range constants which are network specific in ETS 300 374-1 [19] are profiled in -- EN 301 152-2 [31]. -- Additional constants are defined as follows: 10 Draft EN 301 152-1 V1.1.1 (1998-01) minCalledPartyBCDNumberLength INTEGER ::= 1 maxCalledPartyBCDNumberLength INTEGER ::= 41 minGenericNumberLength INTEGER ::= 3 maxGenericNumberLength INTEGER ::= 11 numOfGenericNumbers INTEGER ::= 5 -- APPLICATION SERVICE ELEMENTS gsmSCF-Activation-ASE ::= APPLICATION-SERVICE-ELEMENT -- consumer is gsmSSF CONSUMER INVOKES { initialDP } gsmSSF-call-processing-ASE ::= APPLICATION-SERVICE-ELEMENT -- supplier is gsmSCF SUPPLIER INVOKES { continue } 6.5 Application contexts CAP-v1-gsmSSF-to-gsmSCF-AC APPLICATION-CONTEXT -- dialogue initiated by SSF with InitialDP INITIATOR CONSUMER OF { gsmSCF-activation-ASE, Connect-ASE Call-handling-ASE, BCSM-event-handling-ASE, gsmSSF-call-processing-ASE, Activity-test-ASE } ::= {ccitt(0) identified-organization(4) etsi(0) mobileDomain(0) gsm-Network(1) ac(0) cap-gsmssf-to-gsmscf(50) version1(0)}; 6.6 Classes This subclause defines the following classes. -- The following items are imported. IMPORTS ROS-OBJECT-CLASS, CONTRACT, OPERATION-PACKAGE, Code, OPERATION, CONNECTION-PACKAGE FROM Remote-Operations-Information-Objects {joint-iso-ccitt remote-operations(4) informationObjects(5) version1(0)} EXTENSION ::= CLASS { &ExtensionType, &criticality CriticalityType DEFAULT ignore, &id Code } WITH SYNTAX { EXTENSION-SYNTAX &ExtensionType CRITICALITY &criticality IDENTIFIED BY &id } -- Example of addition of an extension named 'Some Network Specific Indicator' of type -- BOOLEAN, with criticality 'ignore' and to be identified with object ID 'ccitt(0) -- identified-organization(4) organisation(x) gsm(x) capextension': -- Example of definition using the above information object class: -- -- SomeNetworkSpecificIndicator EXTENSION ::= { -- EXTENSION-SYNTAX BOOLEAN -- CRITICALITY ignore -- IDENTIFIED BY global : xxxxxx -- } firstExtension EXTENSION ::= { EXTENSION-SYNTAX NULL CRITICALITY ignore IDENTIFIED BY global:{xxxxxx} } SupportedExtensions EXTENSION ::= {firstExtension -- full set of network operator extensions}