ebook img

Imprinting a topological interface using Zeeman shifts in an atomic spinor Bose-Einstein condensate PDF

0.6 MB·
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Imprinting a topological interface using Zeeman shifts in an atomic spinor Bose-Einstein condensate

4 Imprinting a topological interface using Zeeman 1 0 shifts in an atomic spinor Bose-Einstein condensate 2 y a M M O Borgh, J Lovegrove and J Ruostekoski Mathematical Sciences, University of Southampton, Southampton, SO17 1BJ, UK 3 2 Abstract. We propose to use spatial control of the Zeeman energy shifts in an ] s ultracold atomic gas to engineer an interface between topologically distinct regions. a g This provides an experimentally accessible means for studying the interface physics - of topological defects and textures. Using the spin-1 Bose-Einstein condensate as an t n example,wefindspinorwavefunctionsthatrepresentdefectsandtexturescontinuously a connecting across the interface between polar and ferromagnetic regions induced by u q spatially varying Zeeman shifts. By numerical energy-minimization we characterize . the defect core structures and determine the energetic stability. The techniques t a proposed could potentially be used in the laboratory to emulate complex interface m physics arising, e.g., in cosmological and condensed-matter contexts in both uniform - d and lattice systems. n o c [ 2 v 9 4 9 6 . 1 0 4 1 : v i X r a Imprinting a topological interface using Zeeman shifts 2 1. Introduction The physics of topological defects, such as vortices, becomes especially intriguing at the interface between coexisting, topologically distinct phases of a macroscopically coherent system. Due to different broken symmetries on either side, a defect cannot perforate the interface unchanged. Instead it must either terminate, or continuously connect across the boundary to an object representing a different topology. This situation arises, for example, at the interface between the A and B phases of superfluid liquid 3He [1–3], at interfaces between regions of different vacua in theories of the early universe [4,5], in the physics of branes in superstring theory [6,7], and in exotic superconductivity [8]. The parallels [2] between cosmological objects and defects in superfluids prompted the suggestion that analogues of cosmological phenomena can be studied in the laboratory [2,9], for example the formation of defects in phase transitions [10–13] or properties of cosmic vortons (superconducting cosmic strings [14]) [15–19]. Current experimental techniques in atomic physics allow accurate measurements and precise control and manipulation of ultracold atomic gases by finely tuning electromagnetic fields. In spinor Bose-Einstein condensates (BECs), where the atoms retain their spin degree of freedom, experiments have demonstrated controlled preparation of coreless vortices andanalogousnon-singular textures formedby thenematic axis [20–23]. Vortex nucleation in phase transitions [13] and dynamical formation of spin textures [24–27] have also been experimentally observed. Simultaneously there has been a rapidly increasing theoretical interest in the wide variety of vortices, point defects and particle- like textures in two-component (pseudospin-1/2) [15–19,28–31], as well as spin-1 [32–51] and spin-2,3 [52–56] BECs. This development brings multi-component systems of ultracold atoms to the forefront as candidate laboratories where properties of a variety of field-theoretical solitons (see for exampel [14,57–60]) may be studied. We have previously suggested [61,62] that spatially non-uniform manipulation of scattering lengths by optical or microwave-induced Feshbach resonances can be used to study the physics of topological interfaces in ultracold atomic gases with spin degree of freedom. An example is the spinor BECs, which exhibit distinct phases of the ground-state manifold. In the simplest case of a spin-1 BEC there are two phases, polar and FM, and the sign of the spin-dependent interaction determines which phase is energetically favourable. We proposed that a combination of (microwave or optical) Feshbach resonances and spatially-dependent AC-Stark shifts can be used to enforce different signs of this interaction in different spatial regions of the same spin-1 BEC, establishing a coherent interface between the phases. Within this system, we formulated spinor wave functions corresponding to defect combinations that can bephase imprinted using existing techniques. By numerical simulation we found examples of energetically stable interface-crossing defects and complex core deformations, such as the formation of an arch-shaped half-quantum vortex on the interface. In addition, defects at an energetically established boundary in a two-component BEC, where in one region the two components are miscible and in the other immiscible, have recently been studied in Imprinting a topological interface using Zeeman shifts 3 BECs in [63–67]. Here we propose to employ precise spatial engineering of the Zeeman shifts to create topologically dissimilar regions within a spinor BEC, providing anexperimentally simple routeforstudying defects andtextures at theemerging topologicalinterface. The ground state of the spinor BEC generally depends on the linear and quadratic energy shifts of the Zeeman levels. In the case of the spin-1 BEC, the Zeeman shift can cause the condensate to adopt the FM phase even when the polar phase is favoured by the interactions, and vice versa [13,68–72]. In particular, we demonstrate that a stable, coherent, topologically non-trivial interface between FM and polar phases of a spin-1 BEC can be established through spatially non-uniform linear or quadratic Zeeman shifts. Uniformground-state solutions exist, forbothpolarandFMinteraction regimes, thatfollowthevariationof theZeeman shift; the corresponding wave functions continuously interpolate between the polar and FM phases. We then analytically construct defect states that continuously connect defects and textures representing the topology of the FM and polar phases, such that the connection is provided directly by the spatial dependence of the Zeeman energy shifts. We show that the modulation of the Zeeman splitting allows the preparation of a rich family of interface-crossing defect solutions, with various combinations of singular (integer and half-quantum) and non-singular vortices, point defects, and terminating vortices. By numerical simulation, we determine the stability properties of the constructed solutions and determine their energy-minimizing core structures. In the polar interaction regime, the interface is established by a varying linear Zeeman shift. Examples of energetically stable interface-perforating defect configurations in a rotating trap include a singly quantized FM vortex line continuously connecting to a singly quantized polar vortex whose core splits into a pair of half- quantum vortices, as well as a polar vortex that terminates at the interface. For a BEC in the FM interaction regime, a spatially varying quadratic energy shift is used to establish the interface between the polar and FM phases. We find an energetically stable, singular FM vortex that terminates at the interface. Moreover, non-singular, coreless vortices in the FM phase become energetically favourable, and we find energetically stable structures where the coreless vortex continuously connects to a singly quantized vortex on the polar side of the interface. The unusual property of the singly quantized polar vortex in this configuration is the axially symmetric stable vortex core, in which the line singularity is filled with atoms in the FM phase, and the core is not split into a pair of half-quantum vortices. The existence of stable core structures of different symmetries in atomic spinor BECs is reminiscent of the rich vortex core symmetries encountered in superfluid liquid 3He [73]. For example, the core of a singular B-phase vortex may analogously retain a non-zero superfluid density by filling with the A phase, either with an axially symmetric core [74] or by breaking the axial symmetry when forming a two-fold symmetric split core [75,76]. In the case of both FM and polar interactions we also find stable core structures Imprinting a topological interface using Zeeman shifts 4 of singular FM vortex lines terminating on a point defect in the polar phase. Such a point defect is analogous to the ’t Hooft-Polyakov monopole [77,78] and the combined defect configuration of the terminating vortex line and the point defect is closely related to boojums that can exist in superfluid liquid 3He [2,79,80]. The core of the point defect minimizes its energy by deforming into a half-quantum line defect connecting at both ends to the interface. As the point defect, or the ‘Alice arch’ line defect, does not couple to the trap rotation, the defect experiences a trivial instability with respect to drifting out of the atom cloud as a result of the density gradient of the harmonic trap (the order parameter bending energy of defects and textures generally favours lower atom densities), but can be otherwise stable. Such an instability could be overcome by creating a local density minimum close to the trap centre by an additional optical potential [40]. The interface physics with the Zeeman shifts provides several promising experimental scenarios. Accurate tuning of Zeeman shifts has been experimentally demonstrated in ultracold atoms [81], and also applied to the study of spin textures [27]. On the other hand, the control of multiple interfaces and their time-dependence could open up avenues for emulating complex cosmological phenomena in the laboratory. For instance, in superfluid liquid 3He [82] or in a two-component BEC system [63–66] it has been proposed that colliding interfaces or phase boundaries could mimic cosmic defect formation. In a spin-1 BEC we could envisage, for instance, the following set-up: A disc of polar phase is created in an otherwise FM condensate by locally increasing Zeeman shift. The two parallel FM-polarinterfaces canthenbe interpreted as analogues of string-theoretical D-branes and anti-branes arising in theories of brane inflation [6]. Removing the local Zeeman shift causes the interfaces to collapse, simulating defect formation in brane annihilation scenarios. Similar experiments have been performed with colliding superfluid 3He A-B interfaces [82], where, however, observation of defects is more difficult. 2. Effects of Zeeman energy shifts in the spin-1 BEC Here we consider the engineering of a topological interface by manipulation of Zeeman shifts in the context of a spin-1 BEC. In the Gross-Pitaevskii mean-field theory, the condensate wave function is a three-component vector Ψ = √nζ, where n is the atomic density and ζ is a normalized spinor (ζ†ζ = 1) in the basis of spin projection onto the z axis. A magnetic field in the z direction leads to linear and quadratic energy shifts of the Zeeman sublevels, of strengths p and q respectively. The Hamiltonian density may then be written as [83] ~2 c c 2 = Ψ 2 +V(r)n+ 0n2 + 2n2 Fˆ pn Fˆ +qn Fˆ2 , (1) H 2m |∇ | 2 2 − z z (cid:12)D E(cid:12) D E D E where V(r) is the external trapping p(cid:12)otent(cid:12)ial for the atoms. The local spin vector (cid:12) (cid:12) is given by the expectation value of the spin operator Fˆ defined as a vector of spin- 1 Pauli matrices. The contact interaction between the atoms separates into spin- Imprinting a topological interface using Zeeman shifts 5 independent and spin-dependent contributions. The respective interaction strengths are c = 4π~2(2a +a )/3m and c = 4π~2(a a )/3m, where m is the atomic mass, 0 2 0 2 2 0 − and a are the scattering lengths in the spin-0,2 channels of colliding spin-1 atoms. 0,2 The interaction terms give rise to the density and spin healing lengths ~ ~ ξ = , ξ = , (2) n F √2mc n 2m c n 0 2 | | that describe the length scales over which perturbations of the atom density and the p spin magnitudes, respectively, heal. When the Zeeman shifts are not present (p = q = 0), (1) is invariant under spin rotations. The ground state of the uniform system (V(r) = 0) then exhibits two phases depending on the sign of c . In the FM phase, favoured when c < 0 (e.g., in 87Rb), the 2 2 spin is maximized: Fˆ = 1 for a uniform spin texture. All physically distinguishable, |h i| degenerate, ground states are then coupled by three-dimensional spin rotations. The family of FM spinors can therefore be parametrized as [32] √2e−iαcos2 β eiφ′ 2 ζf = sinβ , (3)   √2 √2eiαsin2 β  2    where (α,β,φ′)areEuler anglesdefining thespin rotationsuch that Fˆ = cosαsinβxˆ+ h i sinαsinβyˆ + cosβˆz. A condensate phase φ is absorbed by the third Euler angle γ to form φ′ = φ γ, and corresponds to spin rotations about the local spin direction. − The order-parameter manifold, the broken symmetry in the ground state, is therefore SO(3), whichsupports onlytwo distinct classes oflinedefects: singular, singlyquantized vortices, and non-singular coreless vortices (see Appendix A). The polar phase with minimized spin, Fˆ = 0 in the uniform texture, is favoured |h i| when c > 0 (e.g., in 23Na). The degenerate ground states are then characterized by a 2 macroscopic condensate phase φ and a unit vector dˆ [35,40]: d +id eiφ − x y ζp = √2d . (4)  z  √2 d +id x y     Note that ζ(φ,dˆ) = ζ(φ + π, dˆ). These states are therefore identified, and hence dˆ − should be understood as unoriented. The identification is reflected in the factorization by the two-element group in the corresponding broken ground-state symmetry [S2 × U(1)]/Z . This so-called nematic order leads to the existence of half-quantum vortices 2 [e.g., (A.6)]. While all circulation-carrying vortices are singular in the polar phase, it is possible to form a non-singular nematic coreless vortex [51], characterized by a fountain-like texture in dˆ [e.g., (A.7)]. Here we consider the case when either or both of the Zeeman energy contributions are non-zero. The linear Zeeman shift in a magnetic field B = Bˆz is given by p = g µ B, where the Land´e factor g = 1/2 in the F = 1 ground-state manifold of F B F − − 23Na or 87Rb. The linear shift can be given a spatial dependence by careful engineering Imprinting a topological interface using Zeeman shifts 6 of the applied magnetic field B. In alkali-metal atoms in the regime relevant to our considerations, the quadratic shift q, which can be obtained from the Breit-Rabi formula [84], is positive and smaller than p. However, by combining a static magnetic field with an off-resonant microwave dressing field, accurate tuning of the quadratic energy shift can be achieved through the resulting AC-Stark shifts [81], or could be induced by lasers [85]. When the Zeeman shifts are included, the coupled Gross-Pitaevskii equations for the spinor components ψ = nζ (j = +,0, ) derived from (1) read j i − ∂ ~2 i~ Ψ = 2 +V(r)+c n+c n Fˆ Fˆ pFˆ +qFˆ2 Ψ. (5) ∂t −2m∇ 0 2 h i· − z z (cid:20) (cid:21) In a uniform system, these may be solved analytically [70–72] to find the stationary states. The Zeeman shifts break the spin-rotational symmetry of the FM and polar ground states. One then finds, in addition to the purely FM state with Fˆ = ˆz and h i ± the polar state with dˆ = ˆz, also the steady-state solution [70,72] eiχ+P 1 + ζ = 0 , (6)   √2 eiχ−P −     where P = 1 p/c n. The solution (6) is valid provided that the linear Zeeman shift ± 2 ± issufficiently small, suchthat p c n. Notethattheexpectationvalueofthespinisno p | | ≤ 2 longerzero, Fˆ = p/(c n)ˆz,anddˆ liesinthexy plane. ForveryweaklinearZeemanshift 2 h i p, the expression then approaches the polar state ζ = (eiχ+/√2,0,eiχ−/√2)T. At the limit of validity, ontheother hand, it coincides withtheFMsolution ζ = (eiχ+,0,0)T for p > 0 [ζ = (0,0,eiχ−)T for p < 0]. The spinor (6) also represents the lowest-energy state when c > 0 and q p2/2c n [70,72]. Hence in a condensate with polar interactions, 2 2 ≤ such as for 23Na, (6) provides an energetically stable solution that takes values between FM and polar phases, depending on the linear Zeeman shift. A further solution with variable Fˆ is given by the FM-like spinor [71,72] |h i| p2 +q2 +2c nq ζ = ei(χ0∓χz)(q p) − 2 , (7) ± ± s 8c2nq3 (q2 p2)( p2 q2 +2c nq) ζ = eiχ0 − − − 2 . 0 s 4c2nq3 The solution is valid when the expressions under the square roots are positive. The corresponding regions in the (p,q) plane are shown in figure 1. While several regions of validity exist for both signs of c , we note that (7) forms the ground state in the uniform 2 system only for c < 0 in the region defined by q > p and p2 > q2 2 c nq. From 2 2 | | | | − | | this point on, we will consider the solution (7) only in this parameter range. The spin vector is in general tilted with respect to the magnetic field and for χ = χ = 0 lies in 0 z the xz plane for the parameters of interest. Then (q2 p2) (p2 2c2nq)2 q4 p( p2 +q2 +2qc n) Fˆ = − − − xˆ+ − 2 ˆz, (8) h i q 2(cid:2) c2 nq2 (cid:3) 2c2nq2 | | Imprinting a topological interface using Zeeman shifts 7 such that 2q2(p2 +2c2n2) q4 p4 Fˆ = 2 − − . (9) |h i| s 4q2c2n2 2 Assuming p > 0 (p < 0 analogous by symmetry), the limit (p = q) yields Fˆ = 1, |h i| corresponding to the FM state ζ = (1,0,0)T. Similarly, p2 = q2 2 c nq yields the 2 − | | polar limit ζ = (0,1,0)T with Fˆ = 0 and dˆ = ˆz. From these results it follows (see |h i| also figure 1) that varying p and/or q can continuously connect the two limits while simultaneously rotating the spin vector from Fˆ =ˆz in the FM limit to the x direction h i (implying a simultaneous rotation of dˆ from xˆ to ˆz). For simplicity, we will here only − consider variations of q for constant p. p/|c2|n p/|c2|n π |hFˆi| β 0 q/|c2|n q/|c2|n Figure 1. The solution (7) is valid in the coloured regions. Left: spin magnitude showing interpolation between FM and polar limits. Right: angle β between Fˆ and h i ˆz. The figure shows the case c2 < 0 where (7) forms the ground state for q > 0. For c2 >0,thefiguresaremirroredaroundtheorigin,andthesolutionisnevertheground state. Together (6) and (7) thus provide us with spinor wave functions that—in the polar and FM interaction regimes, respectively—represent solutions of different spin magnitudes Fˆ , depending on the value of the Zeeman shifts. Here we propose to |h i| create the topological interface between FM and polar phases by engineering the spatial dependence of the linear and quadratic level shifts. For spatially varying Zeeman energy shifts the solutions (6) and (7) continuously interpolate between the polar and FM phases. We will show that a stable, coherent interface forms in the intermediate region. It then becomes possible for topological defects and textures in the two regions of the polar and FM phases to connect continuously across the interface. We now proceed to explicitly construct such analytic defect solutions for the two interaction regimes separately. Imprinting a topological interface using Zeeman shifts 8 3. Interface by linear Zeeman shift for c > 0 2 In order to construct defect states in the BEC with polar interactions it is beneficial to transform the ground-state solution (6) by applying a BEC phase φ and a rotation [determined by theEuler angles(α,β,γ)]oftheorthogonalvector triad( Fˆ ,dˆ, Fˆ dˆ). h i h i× We obtain √2e−iα eiγ sin2 βP e−iγcos2 βP eiφ 2 − − 2 + ζ = sinβ(eiγP +e−iγP ) , (10) 2  −(cid:0) − + (cid:1)  √2eiα eiγcos2 βP e−iγ sin2 βP  2 − − 2 +    where we have set χ = π, χ =(cid:0)0 to specify dˆ = xˆ in (6). F(cid:1)or (10) we have + − Fˆ = F cosαsinβxˆ+F sinαsinβyˆ +F cosβˆz, (11) h i dˆ = (cosαcosβcosγ sinαsinγ)xˆ (12) − +(sinαcosβcosγ +cosαsinγ)yˆ sinβcosγˆz. − Equation (10) represents a spinor wave function that takes values between the FM and the polar phases while allowing the spatial variation of the orientation of the triad and the BEC phase, as determined by (φ,α,β,γ). In the absence of the Zeeman shifts, it gives all the degenerate states. The Zeeman energy contribution can partially lift this degeneracy, but as we will consider non-uniform defect states in a rotating trap, (10) provides themost suitable starting point for constructing theinitial states for theenergy minimization. We can now construct specific defect configurations, that connect FM and polar defects by making appropriate choices for (φ,α,β,γ). All the basic defect connections that we have engineered are presented in table 1. The elementary defect and textures of the spin-1 system that act as building blocks are briefly summarized in Appendix A. Here we give an explicit discussion of some representative examples. The procedure for constructing the vortex connections is to first identify the essential characteristics of the limiting defect states and then the necessary parameter choices in (10). Singly quantized vortex penetrating the interface: The phase vortex, formed by a 2π winding of the condensate phase alone, corresponds to a singular, singly quantized vortex in both FM and polar limits (see Appendix A). Hence, we may continuously connect the two across the interface formed as p is varied by choosing φ = ϕ, where ϕ is the azimuthal angle in polar coordinates, and keeping the Euler angles α, β and γ constant in (10). Making the simplifying assumption α = γ = 0, we then have √2 sin2 βP cos2 βP eiϕ 2 − − 2 + ζ = sinβ(P +P ) . (13) 2  (cid:0)− − + (cid:1)  √2 cos2 βP sin2 βP  2 − − 2 +    Note that this solution is d(cid:0)eceptively simple: a(cid:1) singly quantized vortex represents entirely different objects (due to the different topology) in the two phases. More complicated vortex states can be constructed by more elaborate choices. Imprinting a topological interface using Zeeman shifts 9 Singly quantized polar vortex to FM coreless vortex: The latter is characterized by a 2π winding of the condensate phase, together with a simultaneous spin rotation represented by a 2π winding of α, as described by (A.2). Hence we choose φ = α = ϕ (γ = 0), giving √2 sin2 β(ρ)P cos2 β(ρ)P 1 2 − − 2 + ζ =  (cid:16)eiϕsinβ(ρ)(P +P ) (cid:17) , (14) − + 2 − √2ei2ϕ cos2 β(ρ)P sin2 β(ρ)P  2 − − 2 +   (cid:16) (cid:17)  where we also require β(ρ) to increase monotonically with the radial distance ρ, from β = 0 on the z axis, to form the characteristic fountain-like spin texture. In the polar limit, a 2π condensate-phase winding represents a singly quantized vortex. According to (A.5), the remaining 2π winding in α only associates a rotation of the dˆ-vector with the singly quantized vortex. As p varies between 0 p c n, this singly quantized 2 ≤ | | ≤ polar vortex connects across the interface to the coreless vortex in the FM limit. Termination of a singular FM vortex as a point defect on the interface. A point defect in the polar phase corresponds to a radial hedgehog of the dˆ axis, analogous to the ’t Hooft-Polyakov monopole [77,78]. The simplest example is given in (A.8). In the polar limit of (10), we form the point defect by a 2π winding in α together with β = θ π/2, where θ is the polar angle in spherical coordinates. In the FM limit the − same choices correspond to a singular spin texture similar to (A.1), exhibiting a radial disgyration around the singular line. We can thus construct a singular FM vortex that terminates as the upper half of a polar point defect by choosing α = ϕ and β = θ π/2. − Half-quantum vortex to singular FM vortex: The defining feature of a polar half- quantum vortex (A.6) is a π winding of the condensate phase φ, together with a simultaneous dˆ dˆ winding of the nematic axis to keep the order parameter single- → − valued. However, no similar construction is possible in the FM phase. Therefore the winding of the condensate phase must combine with the spin rotation represented by the third Euler angle γ to make the combined φ′ = φ γ in the FM limit [cf. (3)] wind − by a multiple of 2π. The combination φ = γ = ϕ/2 (α = 0) connects the half-quantum − vortex to a singly quantized vortex defined by φ′ = ϕ in the FM limit. Terminating half-quantum vortex: If we instead let γ = φ = ϕ/2, so that these enter the spinor with the same sign, the polar limit of (10) remains a half-quantum vortex, with the rotation of dˆ being in the opposite sense. However, in the FM limit, φ and γ now cancel, φ′ = 0, and the order parameter represents a vortex-free state. The half-quantum vortex in the polar part thus terminates at the interface. As shown in table 1, we also find solutions of a terminating singly quantized polar vortex, a half-quantum vortex connecting to a coreless vortex, a nematic coreless vortex (A.7) connecting either to a coreless or a singular vortex, and a Dirac monopole(A.3)continuously perforatingtheinterfacetoasinglyquantized polarvortex. Note that the vortex line (Dirac string) attached to the Dirac monopole may be formed in two ways: It can be included in the FM phase in such a way that the Dirac monopole joins the polar vortex to the FM vortex that forms the Dirac string. Alternatively, the Imprinting a topological interface using Zeeman shifts 10 Table 1. Interface-crossing defects in the polar interaction regime (c2 > 0) are constructed from (10) by different choices for φ, α, and γ (given as multiples of the azimuthalangle ϕ). For states with non-constantβ, its functional formis givenin the table, where β(ρ) denotes a monotonically increasing function of the radial distance only (see text for details). The two solutions with a Dirac monopole in the FM limit differ by aligning the doubly quantized Dirac string with the positive and negative z axis, respectively [cf. (A.3)]. FM limit Polar limit φ/ϕ α/ϕ γ/ϕ β Vortex free Half-quantum vortex 1/2 0 1/2 const. Vortex free Singly quantized vortex 1 0 1 const. Coreless vortex Half-quantum vortex 1/2 1 1/2 β(ρ) − Coreless vortex Singly quantized vortex 1 1 0 β(ρ) Coreless vortex Nematic coreless vortex 0 1 1 β(ρ) − Singular vortex Nematic coreless vortex 0 1 0 β(ρ) Singular vortex Half-quantum vortex 1/2 1 1/2 const. Singular vortex Half-quantum vortex 1/2 0 1/2 const. − Singular vortex Singly quantized vortex 1 0 0 const. Singular vortex Point defect 0 1 0 β =θ π − 2 Dirac Monopole (z+) Singly quantized vortex 1 1 0 β =θ − Dirac Monopole (z−) Singly quantized vortex 1 1 0 β =θ − − polar vortex itself can act as a Dirac string, so that no other vortices need to be coupled to the monopole. In the latter case, the polar vortex terminates on the interface to a point defect. 4. Interface by quadratic Zeeman shifts for c < 0 2 In the FM interaction regime (c < 0), we proceed as in the polar case, but now 2 transformthespinorwavefunction(7)byapplyingaBECphaseφandrotations(α,β,γ) of the spinor to obtain eiφ β β ζ = e∓i(α+γ)( p+q)Q cos2 +e∓i(α−γ)( p+q)Q sin2 (15) ± + + 2√2 ± 2 ∓ 2 (cid:20) e∓iα q2 p2Q sinβ , − ∓ − eiφ p i ζ = 2 q2 p2Q cosβ + e−iγ(p+q)+eiγ(p q) Q sinβ ,(16) 0 − + 4 − − where n p (cid:2) (cid:3) o p2 q2 +2c nq 2 Q = − ± . (17) ± s 2c2nq3

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.