CoN Pergamon RESEARCH Index to Volume 30 (2000) 2003-2019 Index to Volume 30 Volume 30, Number 1 January REVIEWS D.W. Hadley, W.L. Dolch, S. Diamond: On the occurrence of hollow-shell hydration grains in hydrated cement paste PAPERS H. El-Didamony, K.A. Khalil, M.S. El-Attar: Physiochemical characteristics of fired Clay-limestone mixes I.K. Cisse, M. Laquerbe: Mechanical characterisation of filler sandcretes with rice husk ash additions. Study applied to Senegal S.P. Pandey, R.L. Sharma: The influence of mineral additives on the strength and porosity of OPC mortar A. Ammouche, D. Breysse, H. Hornain, O. Didry, J. Marchand: A new image analysis- technique for the quantitative assessment of microcracks in cement-based materials B. Gerard, J. Marchand: Influence of cracking on the diffusion properties of cement-based materials. Part |: Influence of continuous cracks on the stead-state regime D. Li, X. Wu, J. Shen,Y .W ang: The influence of compound admixtures on the properties of high-content slag cement C. Shi, R.L. Day: Pozzolanic reaction in the presence of chemical activators. Part |: Reaction kinetics Y. Xu, D.D.L. Chung: Effect of sand addition on the specific heat and thermal conductivity of cement C.X. Qian, P. Stroeven: Development of hybrid polypropylene-steel fibre-reinforced concrete C. Cao, W. Sun, H. Qin: The analysis on strength and fly ash effect of roller-compacted concrete with high volume fly ash X. Cheng, J. Chang, L. Lu, F. Liu, B. Teng: Study of Ba-bearing calcium sulphoaluminate minerals and cement M. Mainguy, C. Tognazzi, J.-M. Torrenti, F. Adenot: Modelling of leaching in pure cement paste and mortar Y. Shao,T . Lefort, S. Moras, D. Rodriguez: Studies on concrete containing ground waste glass H.M. Jennings: A model for the microstructure of calcium silicate hydrate in cement paste 0008-8846/99/$ — see front matter © 2001 Elsevier Science Ltd. All rights reserved. PII: SOO08-8846(00)00487-7 Index to Volume 30 (2000) 2003-2019 T. Bing, M.D. Cohen: Does gypsum formation during sulfate attack on concrete lead to expansion? P.S. Mangat, F.J. O’Flaherty: Influence of elastic modulus on stress redistribution and cracking in repair patches M.A. Trezza, A.N. Scian: Burning wastes as an indusrial resource. Their effect on Portland cement clinker J. Zelicé, R. Krstulovic, E. Tkaléec, P. Krolo: The properties of Portland cement-limestone- silica fume mortars P.M. Zisopoulos, M.D. Kotsovos, M.N. Pavlovic: Deformational behaviour of concrete speciments in uniaxial compression under different boundary conditions DISCUSSIONS J. Skalny, I. Odler, F. Young: Discussion of the paper “Sulfate attack,” or is it? by W.G. Hime and B. Mather W.G. Hime, B. Mather: Reply to the discussion of the paper “Sulfate attack,” or is it? NEWS ITEMS Volume 30, Number 2 February IN MEMORIAM H.F.W. Taylor: Alice Elizabeth Moore, 1921-1999 PAPERS S. ORAK: Investigation of vibration damping on polymer concrete with polyester resign S. Gomes, M. Francois: Characterization of mullite in silicoaluminous fly ash by XRD, TEM, and 29Si MAS NMR S. Kurtz, P. Balagaru: Postcrack creep of polymeric fiber-reinforced concrete in flexure E.M. Schulson, |I.P. SwainsonT,.M . Holden, C.J. Korhonen: Hexagonal ice in hardened cement K. Yamada, T. Takahashi, S. Hanehara, M. Matsuhisa: Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer M. Frias, M.I. Sanchez de Rojas, J. Cabrera: The effect that the pozzolanic reaction of metakaolin has on the heat evolution in metakaolin-cement mortars O. Truck, J.P. Ollivier, M. Carcasses: A new way for determining the chloride diffusion coefficient in concrete from steady state migration test Z. Lu, X. Zhou: The waterproofing characteristics of polymer sodium carboxymethyl-cellulose B.A. Clark, P.W. Brown: The formation of calcium sulfoaluminate hydrate compounds. Part Il Y. Xu, D.D.L. Chung: Reducing the drying shrinkage of cement paste by admixture surface treatments Index to Volume 30 (2000) 2003-2019 Y.N. Chan, X. Luo, W. Sun: Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800°C M. Kuroda,T .W atanabe, N.T erashi: Increase of bond strength at interfacial transition zone by the use of ash fly M. El-Hawary, H. Al-Khaiat, S. Fereig: Performance of epoxy-repaired concrete in a marine environment M.Y.A. Mollah, W. Yu, R. Schennach, D.L. Cocke: A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate P. Yan, W. Yang: The cementitious binder derived with fluorogypsum and low quality of fly ash H. Akgutn, J.J.K. Daemen: Influence of degree of saturation on the borehole sealing performance of an expansive cement grout V.G. Papadakis: Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress H. Kada-Benameur, E. Wirquin, B. Duthoit: Determination of apparent activation energy of concrete by isothermal calorimetry G. Renaudin, J.-P. Rapin, B. Humbert, M. Francois: Thermal behavior of the nitrated AFm phase Ca,Alo(OH)4,2(NO3)o:4H2O and structure determination of the intermediate hydrate Ca4Alo(OH)42(NO3)2-2H20 E. Soudée, J. Péra: Mechanism of setting reaction in magnesia-phosphate cements COMMUNICATIONS X. Luo, D.D.L. Chung: Concrete-concrete pressure contacts undr dynamic loading, studied by contact electrical resistance measurement S. Wen, D.D.L. Chung: Enhancing the vibration reduction ability of concrete by using steel reinforcement and steel surface treatments DISCUSSIONS B. Mather: Discussion of the paper “Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack” by J. Zelic R. Zeli¢ Krstulovic, E. Tkaléec, and P. Krolo J. Zelic, R. Zeli¢ Krstulovic, E. Tkaléec, P. Krolo: Reply to the discussion of the paper “Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack NEWS ITEMS 2000 Volume 30, Number 3 PAPERS T. Ramlochan, M. Thomas, K.A. Gruber: The effect of metakaolin on alkali-silica reaction in concrete S. Kumar: Influence of water quality on the strength of plain and blended cement concretes in marine environments C.F. Mora, A.K.H. Kwan: Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing Index to Volume 30 (2000) 2003-2019 J.J. Beaudoin, B. Tamtsia, J. Marchand, H.R. Myers: Solvent exchange in partially saturated and saturated microporous systems: Length change anomalies M.M. Shoaib, M.M. Balaha, A.G. Abdel-Rahman: Influence of cement kiln dust substitution on the mechanical properties of concrete X. Luo, W. Sun, S.Y.N. Chan: Effect of heating and cooling regimes on residual strength and microstructure of normal strength and high-performance concrete S. Wang, C. Vipulanandan: Solidification/stabilization of Cr(V1I) with cement: Leachability and XRD analyses L. Yan, C.H. Jenkins, R.L. Pendleton: Polyolefin fiber-reinforced concrete composites: Part |. Damping and frequency characteristics L. Yan, C.H. Jenkins, R.L. Pendleton: Polyolefin fiber-reinforced concrete composites: Part Il. Damping and interface debonding P.W. Brown, A. Doerr: Chemical changes in concrete due to the ingress of aggressive species Z.P. Bazant, A. Steffens: Mathematical model for kinetics of alkali-silica reaction in concrete C.-K. Park: Hydration and solidification of hazardous wastes containing heavy metals using modified cementitious materials D. Anderson, A. Roy, R.K. Seals, F.K. Cartledge, H. Akhter, S.C. Jones: A preliminary assessment of the use of an amorphous silica residual as a supplementary cementing material C.S. Poon, L. Lam, Y.L. Wong: A study on high strength concrete prepared with large volumes of low calcium fly ash N. Narayanan, K. Ramamurthy: Microstructural investigations on aerated concrete C.-M. Aldea, F. Young, K. Wang, S.P. Shah: Effects of curing conditions on properties of concrete using slag replacement M. Oner: A study of intergrinding and separate grinding of blast furnace slag cement V. Pavlik: Effect of carbonates on the corrosion rate of cement mortars in nitric acid COMMUNICATION C. Hall, S.L. Colston, A.C. Jupe, S.D.M. Jacques, R. Livingston, A.O.A. Ramadan, A.W. Amde, P. Barnes: Non-destructive tomographic energy-dispersive diffraction imaging of the interior of bulk concrete TECHNICAL NOTE N. Ay, M. Unal: The use of waste ceramic tile in cement production DISCUSSIONS S. Chatterji: A discussion of the paper “The alkali-silica reaction. The surface charge density of silica and its effect on expansive pressure” by F.A. Rodrigues, P.J.M. Monteiro, and G. Sposito F.A. Rodrigues, P.J.M. Monteiro, G. Sposito: Reply to the discussion of the paper “The alkali-silica reaction: The surface charge density of silica and its effect on expansive pressure” Indext o Volume 30 (2000) 2003—2019 2007 BOOK REVIEW J. Skalny: Ettringite-the sometimes host of destruction; B. Erlin (Ed.) 505 NEWS ITEMS 507 KEY WORDS 510 2000 Volume 30, Number 4 April PAPERS T. Sebok, O. Stranel: Relationships between the properties of ligninsulphonates and 511 parameters of modified samples with cement binders: Part IV. Influence of sulphonated compounds and sulphonation characteristics on the properties of mortar samples N.P. Luxan, R. Sotolongo, F. Dorrego, E. Herrero: Characteristics of the slags 517 produced in the fusion of scrap steel by electric arc furnace R. Vocka, C. Galle, M. Dubois, P. Lovera: Mercury intrusion porosimetry and 521 hierarchical structure of cement pastes: Theory and experiment D.W. Hobbs, M.G. Taylor: Nature of the thaumasite sulfate attack mechanism in 529 field concrete E.W. Hansen, H.C. Gran,Y .M achabée: FLR technique exchange of methanol/ 535 fluorescent dye with water in water-saturated cement paste examined by NMR J. Paya, J. Monzo, M.V. Borrachero, E. Peris-Mora, F. Amahjour: Mechanical 543 treatment of fly ashes. Part IV. Strength development of ground fly ash-cement mortars cured at different temperatures A. Guerrero, S. Goni, A. Macias, M.P. Luxan: Effects of the starting fly ash on the 553 microstructure and mechanical properties of fly ash-belite cement mortars M. Frias, J. Cabrera: Pore size distribution and degree of hydration of metakaolin- 561 cement pastes M. Singh, M. Garg: Making of anhydrite cement from waste gypsum 571 G. Prokopski, J. Halbiniak: Interfacial transition zone in cementitious materials 579 J.M. Torrents, T.O. Mason, E.J. Garboczi: Impedance spectra of fiber-reinforced 585 cement-based composites: A modeling approach M.C. Nataraja, N. Dhang, A.P. Gupta: Toughness characterization of steel fiber- 593 reinforced concrete by JSCE approach N. Su, Y.-H. Wu, C.-Y. Mar: Effect of magnetic water on the engineering properties 599 of concrete containing granulated blast-furnace slag C. Shi, R.L. Day: Pozzolanic reaction in the presence of chemical activators: Part Il. 607 Reaction products and mechanism M. Castellote, C. Andrade, C. Alonso: Electrochemical removal of chlorides: 615 Modelling of the extraction, resulting profiles and determination of the efficient time of treatment Index to Volume 30 (2000) 2003—2019 J. Monteny, E. Vincke, A. Beeldens, N. De Belie, L. Taerwe, D. Van Gemert, W. Verstraete: Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete C. Monticelli, A. Frignani, G. Trabanelli: A study on corrosion inhibitors for concrete application COMMUNICATIONS X. Lu, F. Yuan: Breakdown voltage and transition zone of concrete X. Fu, W. Hou, C. Yang, D. Li, X. Wu: Studies on Portland cement with large amount of slag D.-M. Bontea, D.D.L. Chung, G.C. Lee: Damage in carbon fiber-reinforced concrete, monitored by electrical resistance measurement S. Wen, D.D.L. Chung: Seebeck effect in steel fiber reinforced cement DISCUSSIONS P.E. Grattan-Bellew: A discussion of the paper “elayed ettringite formation in heat- cured Portland cement mortars” by R. Yang, C.D. Lawrence, C.J. Lynsdale, J.H. Sharp R. Yang, C.D. Lawrence, C.J. Lynsdale, J.H. Sharp: Reply to the discussion by P.E. Grattan-Bellew of the paper “Delayed ettringite formation in heat-cured Portland cement mortars” S. Chatterji: A discussion of the paper “Crystallisation in pores” by G.W. Scherer G.W. Scherer: Reply to the discussion by S. Chatterji of the paper “Cystallization in pores” NEWS ITEMS Volume 30, Number 5 PAPERS G. Xu, J.J. Beaudoin, C. Jolicoeur, M. Page: The effect of a polynaphthalene sulfonate superplasticizer on the contribution of the interfacial transition zone to the electrical resistivity of mortars containing silica and limestone fine aggregate R. Krstulovic, P. Dabic: A conceptual model of the cement hydration process L. Jiang, B. Lin,Y . Cai: A model for predicting carbonation of high-volume fly ash concrete V. Bonavetti, H. Donza, V. Rahhal, E. lrassar: Influence of initial curing on the properties of concrete containing limestone blended cement V.S. Harutyunyan, E.S. Abovyan, P.J.M. Monteiro, V.P. Mkrtchyan, M.K. Balyan: Microstrain distribution in calcium hydroxide present in the interfacial transition zone Z. Agioutantis, E. Chatzopoulou, M. Stavroulaki: A numerical investigation of the effect of the interfacial zone in concrete mixtures under uniaxial compression: The case of the dilute limit Index to Volume 30 (2000) 2003-2019 N. Gowripalan, V. Sirivivatnanon, C.C. Lim: Chloride diffusivity of concrete cracked in flexure G.V. Guinea, G. Hussein, M. Elices, J. Planas: Micromechanical modeling of brick- masonry fracture H.Y. Qasrawi: Concrete strength by combined nondestructive methods: Simply and reliably predicted L. Lam, Y.L. Wong, C.S. Poon: Degree of hydration and gel/space ratio of high- volume fly ash/cement systems M. O’Farrell, S. Wild, B.B. Sabir: Resistance to chemical attack of ground brick— PC mortar: Part Il. Synthetic seawater S. Erdogdu: Compatibility of superplasticizers with cements different in composition R. Yang, N.R. Buenfeld: Microstructural identification of thaumasite in concrete by backscattered electron imaging at low vacuum A. Peled, A. Bentur: Geometrical characteristics and efficiency of textile fabrics for reinforcing cement composites F. Collins, J.G. Sanjayan: Cracking tendency of alkali-activated slag concrete subjected to restrained shrinkage Z. Mei, D.D.L. Chung: Effects of temperature and stress on the interface between concrete and its carbon fiber epoxy-matrix composite retrofit, studied by electrical resistance measurement C. Shi, J.A. Stegemann: Acid corrosion resistance of different cementing materials M.F. Petrou, K.A. Harries, F. Gadala-Maria, V.G. Kolli: A unique experimental method for monitoring aggregate settlement in concrete E.M. Gartner, K.E. Kurtis, P.J.M. Monteiro: Proposed mechanism of C-S-H growth tested by soft X-ray microscopy COMMUNICATIONS N.M. Agyei, C.A. Strydom, J.H. Potgieter: An investigation of phosphate ion adsorption from aqueous solution by fly ash and slag X. Zhang, J. Han: The effect of ultra-fine admixture on the rheological property of cement paste DISCUSSIONS E.F. lrassar: A discussion of the paper “Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack” by J. Zelic, R. Krstulovic, E. Tkalcec, and P. Krolo J. Zeli¢é, R. Krstulovic, E. Tkaléec, P. Krolo: Reply to the discussion by E.F. lrassar of the paper “Durability of the hydrated limestone-—silica fume Portland cement mortars under sulphate attack” M.N. Haque: A discussion of the paper “Influence of the superplasticizer, plasticizer and silica fume on the drying shrinkage of high-strength concrete subjected to hot-dry field conditions” by S.H. Alysayed Index to Volume 30 (2000) 2003—2019 BOOK REVIEW J. Skalny: Eminent Civil Engineers — Their 20th Century Life and Times; D. Doran (Ed.) NEWS ITEMS Volume 30, Number 6 PAPERS R. Piltner, P.J.M. Monteiro: Stress analysis of expansive reactions in concrete A.R. Brough, A. Atkinson: Automated identification of the aggregate—paste interfacial transition zone in mortars of silica sand with Portland or alkali-activated slag cement paste P.D. Tennis, H.M. Jennings: A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes W.W.J. Chan, C.M.L. Wu: Durability of concrete with high cement replacement D. Li, ¥. Chen, J. Shen, J. Su, X. Wu: The influence of alkalinity on activation and microstructure of fly ash B.-G. Kim, S. Jiang, C. Jolicoeur, P.-C. Aitcin: The adsorption behavior of PNS superplasticizer and its relation to fluidity of cement paste V. Pavlik: Water extraction of chloride, hydroxide and other ions from hardened cement pastes X. Luo, W. Sun, S.Y.N. Chan: Characteristics of high-performance steel fiber- reinforced concrete subject to high velocity impact A. Loukili, D. Chopin, A. Khelidj, J.-Y.L. Touzo: A new approach to determine autogenous shrinkage of mortar at an early age considering temperature history G. Levita, A. Marchetti, G. Gallone, A. Princigallo, G.L. Guerrini: Electrical properties of fluidified Portland cement mixes in the early stage of hydration J. Tritt-Goc, N. PiSslewski, S. KoScielski, F. Milia: The influence of superplasticizer on the hydration and freezing processes in white cement studied by 1H spin-lattice relaxation time and single point imaging M.L. Allan: Materials characterization of superplasticized cement—sand grout S. Igarashi, H.R. Kubo, M. Kawamura: Long-term volume changes and microcracks formation in high strength mortars D.P. Bentz, O.M. Jensen, A.M. Coats, F.P. Glasser: Influence of silica fume on diffusivity in cement-based materials: |. Experimental and computer modeling studies on cement pastes Y. Li, ¥. Sun: Preliminary study on combined-alkali-slag paste materials COMMUNICATIONS A. Oztiirk, Y. Suyadal, H. Oguz: The formation of belite phase by using phosphogypsum and oil shale Index to Volume 30 (2000) 2003-2019 X. Lu, M. Chen, F. Yuan: Evaluation of concrete permeability by critical voltage M.M. Ali, S.K. Agarwal, A.K. Solankey, S.K. Handoo: High-performance, marble- like plaster coatings K.-R. Wu, A. Yan, J.-Y. Liu, D. Zhang, W. Yao: Reconstruction and analysis of 3-D profile of fracture surface of concrete F. Leng, N. Feng, X. Lu: An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete T. Seb6k, M. Vondruska: Interaction of anhydrite and melamine-formaldehyde polycondensates in aqueous suspensions DISCUSSIONS S. Chatterji: A discussion of the papers “Concentration dependence of diffusion and migration of chloride ions. Part 1 and 2” by Luping Tang L. Tang: Reply to the discussion of the papers “Concentration dependence of diffusion and migration of chloride ions. Part 1 and Part 2” by S. Chatterji NEWS ITEMS 2000 Volume 30, Number 7 PAPERS C. Gong, N. Yang: Effect of phosphate on the hydration of alkali-activated red mud-—slag cementitious material P. Dabic, R. Krstulovic, D. Rusi¢: A new approach in mathematical modelling of cement hydration development F. Guirado, S. Gali, S. Chinchén: Quantitative Rietveld analysis of aluminous cement clinker phases K.G. Babu, V.S.R. Kumar: Efficiency of GGBS in concrete N. Bouzoubaa, M.H. Zhang, V.M. Malhotra: Laboratory-produced high-volume fly ash blended cements: Compressive strength and resistance to the chloride-ion penetration of concrete C. Alonso, C. Andrade, M. Castellote, P. Castro: Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar Y. El Hafiane, A. Smith, J.P. Bonnet, P. Abelard, P. Blanchart: Electrical characterization of aluminous cement at the early age in the 10 Hz—1 GHz frequency range M.H. Shehata, M.D.A. Thomas: The effect of fly ash composition on the expansion of concrete due to alkali—silica reaction G. Kakali, S. Tsivilis, E. Aggeli, M. Bati: Hydration products of C3;A, C,S and Portland cement in the presence of CaCO, H.A. van der Sloot: Comparison of the characteristic leaching behavior of cements using standard (EN 196-1) cement mortar and an assessment of their long-term environmental behavior in construction products during service life and recycling Index to Volume 30 (2000) 2003-2019 M. Cyr, A. Carles-Gibergues, A. Tagnit-Hamou: Titanium fume and ilmenite fines characterization for their use in cement-based materials I.J. Graham, R.L. Goguei, D.A. St John: Use of strontium isotopes to determine the origin of cement in concretes: Case examples from New Zealand T. Yuko, T. Ikabata, T. Akiyama, T. Yamamoto, N. Kurumada: New clinker formation process by the fluidized bed kiln system B. Mu, Z. Li, J. Peng: Short fiber-reinforced cementitious extruded plates with high percentage of slag and different fibers COMMUNICATIONS M.F.M. Zain, S.S. Radin: Physical properties of high-performance concrete with admixtures exposed to a medium temperature range 20°C to 50°C S. Wen, D.D.L. Chung: Uniaxial tension in carbon fiber reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions S. Wen, D.D.L. Chung: Enchancing the Seeback effect in carbon fiber-reinforced cement by using intercalated carbon fibers W. Zhu, P.J.M. Bartos: Application of depth-sensing microindentation testing to study of interfacial transition zone in reinforced concrete Y. Xu, D.L.L. Chung: Improving silica fume cement by using silane Q.Y ang, P. Zhu, X. Wu, S. Huang: Properties of concrete with a new type of saponin air-entraining agent DISCUSSIONS S. Chatterji: A discussion of the paper “Delayed ettringite formation in heat-cured Portland cement mortars” by R. Yang, C.D. Lawrence, C.J. Lynsdale and J.H. Sharp R. Yang, C.D. Lawrence, C.J. Lynsdale, J.H. Sharp: Reply to the discussion by S. Chatterji of the paper “Delayed ettringite formation in heat-cured Portland cement mortars” K.O. Kjensen: A discussion of the paper “Kinetics of the hydration reactions in the cement paste with mechanochemicallyt modified cement 29Si magic-angle-spinning NMR study” by K. Johansson, C. Larsson, O.N. Antzutkin, W. Forsling, H.R. Kota and V. Ronin K. Johansson, C. Larsson, O.N. Antzutkin, W. Forsling, H.R. Kota, V. Ronin: Reply to the discussion by Knut O. Kjellsen of the paper “Kinetics of the hydration reactions in the cement paste with mechanochemically modified cement 29Si magic-angle-sppining NMR study” C. Andrade: A discussion of the paper “Concentration dependence of diffusion and migration of chloride ions. Part | and Part Il” by Luping Tang NEWS ITEMS IN MEMORIUM O. Shixi: Professor Wu Zhongwei: July 20, 1918—February 4, 2000