2 2 The International Conference on Future Manufacturing Engineering (ICFME 2014) Studies in Materials Science and Mechanical Engineering was held in Hong Kong, December 10-11, 2014. It gathered academics, industry managers and experts, manufacturing engineers, university students all inter- ested or proficient in the field of manufacturing engineering, including research, design and development of systems, processes, machines, tools and equipment. The manufacturing engineer’s primary focus is to turn raw materials into a new or updated product in the most economic, efficient and effective way possible. This field also deals with the integration of different facilities and systems for producing quality products (with optimal expenditure) by applying the principles of physics and the results of manufacturing systems studies, such as Design and Manufacturing, Materials Science and Materials Processing Technology, MA Advances in Future Computer-aid Manufacturing, Mechanics. ad v Manufacturing engineers develop and create physical artifacts, production n a u processes, and technology, a very broad area which includes the design and n Manufacturing Engineering f development of products. The manufacturing engineering discipline has very ac ce strong overlaps with mechanical engineering, industrial engineering, production ts engineering, electrical engineering, electronic engineering, computer science, u rin materials management, and operations management. Manufacturing engineers’ i n success or failure directly impacts the advancement of technology and the F g u spread of innovation. Et This proceedings aims to assess the state of scientific research in various areas nu r of Manufacturing Engineering and will be an interesting source of information for ge the international engineering scientific community. in e e r i n About the Series: g Studies in Materials Science and Mechanical Engineering (SMSME) publishes lecture materials and proceedings volumes of conferences sponsored by the International Materials Science Society (IMSS). Volumes present cutting edge research as well as new perspectives on and developments in all areas of Editor Materials Science and Mechanical Engineering. The audience for the books Yang published in the SMSME series consists of advanced level students, researchers, and industry professionals working at the forefront of Materials Science and Mechanical Engineering. SMSME Editor: Guohui Yang an informa business ADVANCES IN FUTURE MANUFACTURING ENGINEERING FFMM..iinndddd ii 44//2244//22001155 22::4477::1100 PPMM Studies in Materials Science and Mechanical Engineering eISSN: 2333-6560 VOLUME 2 FFMM..iinndddd iiii 44//2288//22001155 33::5588::4499 PPMM PROCEEDINGS OF THE 2014 IMSS INTERNATIONAL CONFERENCE ON FUTURE MANUFACTURING ENGINEERING (ICFME 2014) HONG KONG, 10–11 DECEMBER, 2014 Advances in Future Manufacturing Engineering Editor Guohui Yang International Materials Science Society, Hong Kong, Kowloon, Hong Kong FFMM..iinndddd iiiiii 44//2244//22001155 22::4477::1100 PPMM CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business © 2015 Taylor & Francis Group, London, UK Typeset by V Publishing Solutions Pvt Ltd., Chennai, India Printed and bound in the UK and the US All rights reserved. No part of this publication or the information contained herein may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by pho- tocopying, recording or otherwise, without written prior permission from the publisher. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 11320, 2301 EH Leiden, The Netherlands e-mail: [email protected] www.crcpress.com – www.taylorandfrancis.com ISBN: 978-1-138-02817-3 (Hbk) ISBN: 978-1-315-68462-8 (eBook PDF) FFMM..iinndddd iivv 44//2244//22001155 22::4477::1100 PPMM Advances in Future Manufacturing Engineering – Yang (Ed.) © 2015 Taylor & Francis Group, London, ISBN 978-1-138-02817-3 Table of contents Preface xi Organizing committee xiii Physics and electrical energy Autotransformer-fed railway power supply model using MATLAB/SIMULINK 3 S. Kaewpoung, C. Sumpavakup & T. Kulworawanichpong Optimization of energy consumption in Electric Railways System using hit-and-run algorithm 9 K.A. Greyson & T. Kulworawanichpong Power dependent on supercontinuum generation in the photonic crystal fiber 15 Y.F. Wei & F.L. Zhao Determination of the interface electronic structure of L-cysteine/Ag(111) by Ultraviolet Photoelectron Spectroscopy and Photoelectron Yield Spectroscopy 19 K.R. Koswattage, K. Hiroumi, Y. Nakayama & H. Ishii Maximum Power Point Tracking method based on gray BP neural network photovoltaic power generation system 25 J. Hao & L.Q. Zeng Research and development of high-performance informatization management and control system of power enterprises 31 J. Wu, D. Su & W. Li Study on the integration problem of snow depth monitoring system based on laser ranging and video detection 37 X.Q. Cheng, Y. Qin, Z.Y. Xing & X.H. Wang Background correction algorithm for Laser Induced Breakdown Spectroscopy 43 B. Zhang, L.X. Sun & H.B. Yu Research on thermal dissipation of electric bicycle lithium ion battery pack based on the microencapsulated PCMs thermal management system 49 S.H. Li, W.S. Dai, K.J. Bi, Y.Z. Deng, C. Cai, J. Chen & G.Y. Tang The application of wavelet analysis in signal detection to vehicle Anisotropic Magnetoresistance sensor 55 T. Lin, P. Wu, F.M. Gao, L.H. Wang & Y. Yu A fault diagnosis model of power transformer using Imperialistic Competitive Algorithm and Support Vector Machine 61 Y.Y. Zhang, Z.H. Zhong, H.B. Zheng, C. Tang & Y. Sun Evaluating the efficiency of Renewable Energy technologies by DEA and TOPSIS method with interval data 65 X.G. Qi & B. Guo A new equipment of induction power supply at high voltage 71 H.K. Guo Analysis on the changing tendency of China’s energy structure 75 J. Yao, Y.X. Chen & J.S. Li v FFMM..iinndddd vv 44//2244//22001155 22::4477::1100 PPMM Study on characteristics of grounding impedance of large grounding grid 79 B.P. Xie & Y.L. Wang The research on active distribution network reconfiguration method based on OPF 85 B. Shu, K. Zhang, X.X. Gong & Q.H. Lou Melting curve of Mo under high pressure 91 C.E. Hu, Z.Y. Zeng & J.J. Tan The study and application of power supply reliability forecasting based on wavelet neural network 97 L.L. Yang, X.D. Xu, Z.Y. Liu, Q. Wang & J.Y. Gao Improved time series business expansion combination forecasting model 103 X.D. Xu, Z.Y. Liu, J. Wang, L. Li & X. Song Experimental studies on pipe stress testing based on inverse magnetostriction effect 107 S.X. Yuan, H.M. Guo & R. Deng Research on synthesis and electrochemical properties of cathode materials for lithium ion batteries based on LiFePO 113 4 L.J. Meng, J.F. Gao, Z.K. Xuan, J.Y. Liu, Y. Wang, L.S. Jiao & H.L. Chen Materials processing and analysis Structural and mechanical features of formation of high-speed surface layers of flame sprayed NiAl 119 P.O. Rusinov & Zh.M. Blednova Analysis of factors affecting thermal conductivity of low concentration silver nanofluids prepared by a single step chemical reduction method 125 M.Z. Zhou, G.D. Xia & C.L. Tian The thermodynamic characteristics of silica film calculated via Molecular Dynamics method 131 C. Chen, H. Fang & Z.L. Xia A new composite nanostructure of Au@SiO/AAO 135 2 H. Fang, C. Chen & Z.L. Xia Express measurement of optical material refractive index with using laser beam profiler 139 V. Kolchinskiy, I. Lo, C.-H. Shih, Y. Kulchin & R. Romashko Flow cessation mechanism of β phase solidification of titanium aluminium alloy with high niobium content 143 Z.Q. Gong, L.H. Chai, Z.Y. Chen, F. Zhou, X. Hou & G.F. Yang The luminescence property of Rhodamine B grafted in different structured channels of mesoporous silicate 149 M.L. Wang, Y.Z. Li, W. Xu & Z.H. Huang Mechanical behavior analysis of 2.5D woven composites at elevated temperature based on progressive damage analysis method 155 J. Song, W.D. Wen, H.T. Cui & Y. Xu Pd-TiO/C anodic catalysts for formic acid electrooxidation 163 2 W.F. Xu, Y. Gao, B. Wu, L.F. Li & H.Y. Li Synthesis of 2,3-dibromo-succinic anhydride and application on polyester/cotton blended fabric 169 L.Y. Lin, X. Zhou & Y.R. Wu Elastic analysis of nanocontact problems with surface effects 175 L.Y. Wang & L.J. Wang Experimental research on structure stability of expanded-diameter conductor 181 L. Liu, J.C. Wan, J.J. Si & L.H. Jiang Low pH inhibition on High-loaded Anammox Reactor (HAR) and its recovery 185 Z.X. Li, L. Zhang, L. Wang & H. Li vi FFMM..iinndddd vvii 44//2244//22001155 22::4477::1100 PPMM Effect of post annealing on the structure of Boron Nitride films 191 M.Y. Zhan, H.Y. Fang, R.R. Cao, F. Wang, Y.L. Feng, C.J. Li, M. Wang, K. Li, K.L. Zhang & B.H. Yang Aluminum silicon alloy rolling method and experimental research 197 S.X. Wang Research on preparation and properties of manganese oxide Nano materials 203 J.Y. Liu, L.J. Meng & M.L. Lu Materials engineering and applications Establishment of frost resistance model for autoclaved fly ash bricks 209 S. Lu & Z. Wang Innovative design and application of woody materials in silver jewelry 213 X.J. Yang & K.Q. Wang Building a reasonable path of wall materials industry development under the goals of circular economy 217 X. Jiang & J.X. Huang Research and analysis on the laboratory test of frozen rocks from Jurassic strata 221 H.B. Ma, S. Du & J.H. Chen Research on structure, properties and advantages of prefabricated environmental protection rubber running track 227 M. Yang, B.K. Dong & W.D. He Monitoring and analysis of expansive soil road cutting slope’s pile-plank wall 233 X. Yang Study on dynamic character of high-speed railway subgrade in expansive soil 239 X. Yang CNC machining and machinery Longitudinal control law design and flight test for a small UAV based on Eigenstructure Assignment 247 X.B. Qu, W.G. Zhang & F.Y. Cai An optimal design on the oil conservation switch for the “6 × 4” train for traction 253 L. Deng An analysis of different types of standard basketball stands 257 C.S. He & W.D. He Microstructural evolution of AlSi9Mg alloy prepared by the electromagnetic stirring 263 C.Y. Zhang, S.D. Zhao, Y.F. Wang & P. Dong Study on the improvement of surface quality through ultrasonic elliptical vibration cutting 269 W. Li, F.F. Lin & D.Y. Zhang FPED, a fine-grained parallel edge detection mechanism 275 Q. Shao & C.H. Ju Mechanical analysis of RuT300 steel by using modified 3D RVE model 281 L.F. Sun & R.D. Liao Accurate positioning foil stamping technology 287 Q.H. Chen, Y.J. Chen, Y.M. Li, M.G. Su, Y.B. He & W.G. Wu Research of an LED lamp with quasi-resonant mode driving circuit 291 Q.H. Chen, L.Q. Chen, F.Y. Ou & Y.J. Chen Measurements of the LED driver with steady output characteristics 295 Y. Fan, L.Q. Chen, F.Y. Ou & Y.J. Chen vii FFMM..iinndddd vviiii 44//2244//22001155 22::4477::1100 PPMM Microemulsions of Coumarins from Cortex Daphnes for enhanced transdermal permeability: Preparation and in vitro evaluation 299 L. Ma, Y.F. Wang, X.C. Qu, F. Han, J.L. Deng & X. Feng The feasibility research of steam flooding assisted by air for heavy oil reservoir 307 J. Fan & X.F. Li Research on fault diagnosis system with causal relationship in equipment technical manual’s deep knowledge 311 L. Wang, Y.L. Qian, T.F. Xu & Y.B. Liu Design and implementation of remote workpiece detection system 317 W.W. Gu, M.Y. Huo & Y.M. Liu Analysis on the water resource balance in project “water conservation and provision increase” of Jarud, Tongliao 321 Z.Y. Wang, H.L. Jiang, J.W. Zong & F.X. Sun Study on the application of finite element method and CAE technology in modern mechanical engineering 325 L.E. Yang Manuscript digital recognition system of automobile centre console 329 G.X. Li & K. Huang Computer science and applications A novel speech recognition method based on LLE and SVM 337 J.B. Gao A novel identification method of two phase flow based on LDA feature extraction and ELM in ERT system 341 Y.J. Zhang Vulnerability analysis and improvement of RFID grouping-proof protocols 345 X. Wei, Z.W. Shi & Y.L. Hao Computer aided design of continuous Extractive Distillation processes for separating compound m-Diisopropylbenzene and p-Diisopropylbenzene with Dinonyl Phthalate 349 C.Y. Zhang, J.H. Cheng & C.Z. Zheng Decision model in wine producer marketing based on analytical hierarchy process 353 T.K. Gu, Z.Y. Huang & X.M. Lv IDEF and UML-based enterprise modeling 357 F. Yang, Y.Q. Cheng & L.D. Fan The research on the general and efficient method of network download 363 W.T. Liu Numerical simulation research about offshore wind lifting ship structural damage in the process of lifting 367 Z.Q. Yao, Y. Shu & L.X. Bu Study on navigation radar image fusion denoising algorithm based on multiple wavelet packet bases 373 W.J. Lang, G.G. Chen, X.L. Tian & C.F. Xin Simulation analysis on contact stress of new type energy-saving conductor with different structure 377 J.C. Wan, L. Liu, J.J. Si & L.H. Jiang SC-cylinder parameterization design based on Pro/Engineer 381 Y.C. Lin & F.W. He Design of inverter system based on PID control 385 Y. Cao viii FFMM..iinndddd vviiiiii 44//2244//22001155 22::4477::1100 PPMM The design and realization of security model for P2P network 389 Z.M. Wang The design and implementation of PHP vulnerability protection in e-commerce website 393 J.Z. Yang The design of the wireless communication system based on voice and text 397 Q.S. Zhou Study on the online monitoring system of instrument and equipment based on wireless multimedia sensor networks 401 L. Bao Design of a planar MIMO antenna with high isolation for LTE handsets 405 Y.T. Zhang & J.F. Wen Data processing and information management A kind of QT-Bézier curves and its applications 411 J. Xie, X.Y. Liu & L. Zou The application analysis on share management of supply chain information collaboration by using triangular fuzzy TOPSIS decision method 415 X.D. Deng & W.P. Cao Research of enterprise work safety information management system construction 423 Q.Q. Wang Analysis of provincial domestic tourist arrivals in China: The role of national protected areas 429 A.P. Zhang, L.S. Zhong & Y. Xu The Data Acquisition System of the large-scale sliding bearing test rig design and research 435 D.Q. Ren, W.Z. Zhang, H.Y. Cao & Y. Zhang Research on the secure of embedded system database 441 J. Chen Study on encryption of embedded database system 445 J. Chen Multimedia applications On the strategies of foreign language teaching assisted by the network classes 451 T.H. Wang & X.Y. Wang Application of network classes in Sports English 453 T.H. Wang & X.Y. Wang A study on the oral test of college English in the multi-media environment 455 T.H. Wang & X.Y. Wang Teaching strategies of English listening assisted by multimedia 457 X.Y. Wang & T.H. Wang Inter-cultural communication competence training in multimedia-assisted College English teaching 461 X.Y. Wang & T.H. Wang English films in multimedia-assisted College English classes 465 X.Y. Wang & T.H. Wang Application of network in multimedia-assisted college English reading classes 467 X.Y. Wang & T.H. Wang A study on multimedia-assisted college English listening classes 471 X.Y. Wang & T.H. Wang Popularity prediction based on ensemble learning in online forums 475 F. Xiong, Y. Liu, Z.J. Zhang & Y.S. Zhao ix FFMM..iinndddd iixx 44//2244//22001155 22::4477::1100 PPMM