Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) Sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of The Minerals, Metals & Materials Society (TMS) Held July 17–21, 2016 Omni William Penn Hotel Pittsburgh, Pennsylvania, USA Edited by Elizabeth A. Holm • Susan Farjami Priyadarshan Manohar • Gregory S. Rohrer Anthony D. Rollett • David Srolovitz Hasso Weiland Editors Elizabeth A. Holm Anthony D. Rollett Susan Fa~iami David Srolovitz Priyadarshan Manohar Hasso Weiland Gregory S. Rohrer ISBN 978-3-319-48626-0 ISBN 978-3-319-48770-0 (eBook) DOI 10.1007/978-3-319-48770-0 Chemistry and Materials Science: Professional Copyright © 2016 by The Minerals, Metals & Materials Society Puhlished hy Springer International Puhlishers, Switzerland, 2016 Reprint of the original edition puhlished hy .lohn Wiley & Sons, Inc., 2016, 978-1-119-32835-3 This work is suhject to copyright. 1\11 rights are reserved hy the Puhlisher, whether the whole or part of the material is coneerned, speeitieally the rights of translation, reprinting, reuse of illustrations, reeitation, hroadeasting, reproduetion on mierotilms or in any other physieal way, and transmission or information storage and retrieval, electronic adaptation, computer sollware, or by similar or dissimilar methodology now known or herealler developed. The use of general deseriptive names, registered names, trademarks, service marks, ete. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The puhlisher, the authors and the editors are safe to aSSlllne that the advice and information in this hook are helieved to he true and accurate at the date of puhlication. Neitller the puhlisher nor the authors or the editors give a warranty, express or implied, with respect to the material eontained herein or tür any errors or omissions that may have heen made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11,6330 Cham, Switzerland TABLE OF CONTENTS th Proceedings of the 6 International Conference on Recrystallization and Grain Growth (ReX&GG 2016) Preface ................................................................................................................ xi About the Organizers ....................................................................................... xiii Acknowledgments ........................................................................................... xvii Grain Growth Theory and Simulation Triple Junction Energy and Mobility Controlled Microstructural Evolution in 2D and 3D Polycrystals ...................................................................................3 Dana Zöllner and Peter Streitenberger Grain Boundary, Triple Junction, and Quadruple Point Grain Growth Dynamics .............................................................................................................9 Paulo R. Rios and Martin E. Glicksman Theoretical Basis of the Aboav-Weaire Equation and Topological Consequences .................................................................................................... 15 Giuseppe Carlo Abbruzzese Self-Similar Coarsening and the Envelope Theorem ......................................... 23 Peter Streitenberger and Dana Zöllner Grain Growth in a System Containing Finely Dispersed Mobile Second-Phase Particles: A G(cid:2)(cid:3)-Accelerated Multi-Phase-Field Study ............ 29 Akinori Yamanaka and Masashi Okamoto Recrystallization Theory and Simulation Simulation and Data-Analytics of Sub-Grain Growth with Consideration of Stored Elastic Energy and Anisotropic Grain Boundary Properties .............. 37 Markus Kühbach, Christian Mießen, Luis A. Barrales-Mora, and Günter Gottstein On Recrystallization Twinning in Al-1%Wt.Mn Single Crystals of Two Stable Orientations ............................................................................................. 43 Magdalena M. Miszczyk, Henryk Paul, Julian H. Driver, (cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:5)(cid:11)(cid:10)(cid:12)(cid:13)(cid:14)(cid:2)(cid:15)(cid:2) v Separate Construction of Recrystallization Diagrams for Grains of Different Texture Components .......................................................................... 51 Yuriy Perlovich, Margarita Isaenkova, Olga Krymskaya, Vladimir Fesenko, and Elena Dergunova Modeling the Dynamic Recrystallization: A Modified Cellular Automaton Method ............................................................................................................... 57 Fei Chen and Zhenshan Cui Low Carbon and I(cid:2) Steels Texture Evolutions in Annealing Process for Medium Manganese Steel Sheets ................................................................................................................. 65 K. Okuda, T. Ishikawa, T. Omori, and R. Kainuma Grain Refinement and Texture Evolution in Highly Deformed Ferrite (cid:4)uring High-Temperature Torsion Deformation of IF Steel ........................(cid:2)..... 71 Reza Gholizadeh, Akinobu Shibata, and Nobuhiro Tsuji Nucleation Stage during I(cid:5) Steel Recrystallization and Internal Misorientation Parameters ................................................................................. 79 A. Ayad, M. Ramoul, N. Rouag, A.D. Rollett, and F. Wagner Recrystallization Behavior of (cid:6)-Ferrite in the Ti-Alloyed Low Density Steel ................................................................................................................... 85 Xiangyu Xu, Xuemin Wang, Jianzhe Li, and Jian Zhang Contrasting the Use of Contact and Non-Contact Dilatometers to Measure Ferrite Recrystallization in Cold-Rolled Dual-Phase Steel ................. 91 L.S. Thomas, K.D. Clarke, and D.K. Matlock High Strength Steels Annealing Studies of HSLA Steels Using EBSD .............................................. 99 Yu Gong, Xiaojun Liang, J. Uusitalo, and A.J. DeArdo A Model for the Influence of Micro-Alloying Elements on Static Recrystallization of Austenite .......................................................................... 113 Heinrich Buken, Sabine Zamberger, and Ernst Kozeschnik On Control of Grain Coarsening of Austenite by Nano-Scale Precipitate Engineering of TiN-NbC Composite in Ti-Nb Microalloyed Steel ................. 119 S.V. Subramanian, Ma Xiaoping, Kashif Rehman, and Hatem Zurob vi Driving and Retarding Forces in Tempered Martensite Lath Structure ........... 125 Alexandra Fedoseeva, Nadezhda Dudova, and Rustam Kaibyshev On the Hot Deformation and Static Recrystallization Characteristics of Al-Bearing Microalloyed TWIP Steels ............................................................ 131 Mahesh C. Somani, David A. Porter, and L. Pentti Karjalainen Effects of Deformation Texture and Microstructure on Recrystallization and Grain Growth in TWIP Steels ................................................................... 137 Rajib Kalsar, Pampa Ghosh, Saurabh Kundu, and Satyam Suwas Deformation and Recrystallization Textures in a High-Mn Steel Subjected (cid:7)o Large Strain Cold Rolling ....................................................................(cid:8)(cid:8)...... 147 Zhanna Yanushkevich, Andrey Belyakov, Rustam Kaibyshev, Christian Haase, and Dmitri A. Molodov Effect of Grain Size Distribution on Recrystallisation Kinetics in a Fe-30Ni Model Alloy ...................................................................................... 153 Mo Ji, Vit Janik, Martin Strangwood, and Claire Davis Modelling Microstructure and Mechanical Properties of High Strength Steels during Hot Rolling in an ESP Plant ....................................................... 159 Andrea Di Schino, Claudio Braccesi, Filippo Cianetti, and Ali Smith Through-Process Modeling for Hot Processing of Advanced High Strength Steel Strips ....................................................................................................... 165 Priya A. Manohar Electrical Steels The Effect of Cross-Rolling on the Growth of Goss Grains in a Grain Oriented Silicon Steel ...................................................................................... 173 Fatayalkadri Citrawati, Md Zakaria Quadir, and Paul Munroe Cube Texture Control by Retaining from Columnar Grains in a Fe-3%Si Alloy ................................................................................................................ 179 Ning Zhang, Ping Yang, and Weimin Mao Effect of Cold Rolling Reduction on Recrystallization Texture and Magnetic Anisotropy of Non-Oriented Electrical Steel ................................... 185 Hunju Lee and Jong-Tae Park vii Effect of Temper Rolling Reduction Prior to Hot Band Annealing on the Goss Texture Formation in Grain-Oriented Electrical Steels .......................... 191 Kyung-Jun Ko, Jong-Tae Park, and Chan-Hee Han Effect of Martensite on Deformation Structure and Recrystallization Behavior in Ferritic Stainless Steel .................................................................. 197 Ken Kimura, Kohsaku Ushioda, Eiichiro Ishimaru, and Akihiko Takahashi Recrystallization of Cold Pilgered Heat Resistant Austenitic Stainless Steel Seamless Tubes under Anisothermal Annealing Conditions .................. 203 A. Iza-Mendia, I. Gutierrez, R. Rodríguez, and A. López Hot Deformation Behaviour and Recrystallization Mechanisms in a Niobium Stabilized Austenitic Stainless Steel ................................................. 209 Alexandre Hermant, Eric Suzon, Jacques Bellus, Philippe Petit, François Cortial, and Anne-Françoise Gourgues Aluminum and Magnesium Alloys Precise Direction of Symmetrically Tilt Small Angle Boundaries Developed during Recrystallization of Cross Rolled Aluminium .................... 217 Mohammad Shamsuzzoha Recrystallization Nucleation and Grain Growth in Al-1%wt.Mn Single Crystals of Stable Orientations ........................................................................ 223 Magdalena M. Miszczyk, Henryk Paul, and Julian H. Driver Effect of Strain Path Change on Deformation and Recrystallization Texture Evolution in Al-Mg Alloy .................................................................. 231 Latimuni Patra, Sumeet Mishra, and N.P.(cid:5)Gurao Mechanism of Grain Refinement during Equal-Channel Angular Pressing at Intermediate Temperature in an Al-Mg-Sc Alloy ........................................ 239 Sergey Malopheyev, Vladislav Kulitskiy, Marat Gazizov, and Rustam Kaibyshev Strength and Ductility of Ultrafine Grained ZKX600 Mg Alloy ..................... 245 Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, and Nobuhiro Tsuji viii Nickel and Nickel Based Superalloys Thickness and Surface Effects on Abnormal Grain Growth in Nanocrystalline Nickel Films .......................................................................... 253 Khalid Hattar, Bryan Miller, Ian M. Robertson, and Josh Kacher Heteroepitaxial Recrystallization, a New Recrystallization Mechanism in Sub-Solvus Forged (cid:9)-(cid:9)' Nickel-Based Superalloys with Low Lattice Mismatch ......................................................................................................... 259 Marie-Agathe Charpagne, Thomas Billot, Jean-Michel Franchet, and Nathalie Bozzolo Grain Growth Modeling for Additive Manufacturing of Nickel Based Superalloys ...................................................................................................... 265 H.L. Wei, T. Mukherjee, and T. DebRoy Inconel 718 Microstructural Evolution Modeling during Sequential Forming Steps (Hot Forging Followed by Ring Rolling) ................................ 271 O. Beltran Unconventional and Advanced Materials Point-Group Sensitive Orientation Mapping Using EBSD .............................. 281 Aimo Winkelmann, Gert Nolze, Marcel Himmerlich, Vadim Lebedev, and Angelika Reichmann Influence of Annealing Temperature on the(cid:10)Morphology and Crystallography of Cr, CrN and CrAlN Films ................................................. 287 F.Z. Mammeri, B. Riah, A. Ayad, L. Chekour, M.A.(cid:5)Djouadi, and N. Rouag Changes of Basal Normal Orientation during Recrystallization of Sheets (cid:11)nd Tubes from Zr-Based Alloys ......................(cid:8)(cid:8).............................................. 293 Margarita Isaenkova, Yuriy Perlovich, Vladimir Fesenko, and Olga Krymskaya Textured Growth of Al(cid:12) Films Deposited on Si(100) by DC Reactive Magnetron Sputtering and by High Power Impulse Magnetron Sputtering (HiPIMS) ......................................................................................................... 299 B. Riah, A. Ayad, J. Camus, M.A. Djouadi, and N. Rouag An Effective Method to Homogenize the Microstructure of High Purity Tantalum in Sputtering Targets ....................................................................... 303 Yahui Liu, Shifeng Liu, Lijuan Li, Chao Deng, and Qing Liu ix Author Index .................................................................................................... 309 Subject Index ................................................................................................... 311 x