SPECTRO ARCOS SPECTRO ARCOS Installation Information SOP/EOP SPECTRO ARCOS 1 Technical Data Description Value 230 V AC ± 5 %, 50/60 Hz Electrical connection Phase + neutral + PE, The instrument is equipped with a CEE 32A plug (5-pol). Instrument power consumption 4.5 kVA Instrument required line protection 30 - 32 A (slow-blow) Storage conditions 2 – 40° C (36 – 104° F) Operation conditions (ambient tempera- 15 – 35° C (59 – 95° F) ture limits) Recommended temperature range to 18 – 25° C (64 – 77° F) achieve the specified performance Relative humidity < 80% (non-condensing) Air quality Free of corrosive vapors and excessive dust Operation Max. 3000 m above mean sea level Argon gas supply Inlet pressure during operation 7.5 bar; 109 psi; A maximum Ar inlet pressure of 10.0 bar (145 psi) must not be exceeded under any circumstances Quality (cid:1) 4.6 (99,996 %) Consumption (cid:2) 25 l/min Oxygen supply for the Auxiliary gas (optional, for organic applications only) Pressure 4 bar (58 psi); Quality (cid:1) 4.5 (99.995 %) The gas flow depends on the application. Gas flow Exhaust requirements 110 – 180 m³/h ; 65 – 106 ft³/min Plasma chamber Generator 250 – 300 m³/h; 150 – 175 ft³/min Recommendation for the installation of 2 separate exhausts, each ‡ 250 m3 (‡ 150 an exhaust system ft3/min), separately adjustable between zero and maximum Protection class IP 20 (DIN 40050) Installation Information Rev.1 1 01.06.2007 SPECTRO ARCOS Description Value Cooling (EOP) Optional an external water-air cooling system is available for the SPECTRO ARCOS (EOP). Electrical connection (230 V equip- 230 V AC ± 5 %, 50 or 60 Hz ment) Required line protection: 16 A Electrical connection (110 V equip- 110 V AC ± 5 %, 60 Hz ment) Required line protection: 15 A Medium Water Heat dissipation approx. 1 kW Inlet temperature 5 – 25° C (41 – 77° F) Free from impurities > 1 mm (> 0.04”) Flow rate 1.5 – 2.5 l/min (5.2 – 8.7 Imp/s) Pressure 1 – 5 bar; 14.5 – 72.5 psi Water connection 2.5 m (8.2 ft) long Hose with ¾” connections incl. filter Technical data for accessories Description Value Electrical connection (230 V equip- 230 V AC ± 5 %, 50 or 60 Hz ment) Required line protection: 16 A Electrical connection (110V equip- 115 V AC ± 10 %, 60 Hz ment) Required line protection: 15 A Installation Information Rev.1 2 01.06.2007 SPECTRO ARCOS 2 Transport/Setup Caution! Damage to unit! Never transport the unit without the wooden plate supplied for this purpose, Warning! Heavy object! The unit weighs approx. 250 kg (~ 550 lbs) and the weight is not evenly distrib- uted. Always use appropriate gear to lift the unit. Avoid to tilting the instrument more than 10 degrees from the vertical. 2.1 Dimensions and Weight Description Value Unit height 1074 mm; 42,3“ Unit width 1610 mm; 63,4“ Unit depth 753 mm; 29.7“ Unit weight ca. 250 kg; ~ 550 lbs Footprint 1367 * 692 mm; 53.8” * 27.3“ Installation Information Rev.1 3 01.06.2007 SPECTRO ARCOS Transportation of the instrument to the installation location is the customer’s re- sponsibility. To move the instrument from the loading dock to the place of installation, a lifting platform or forklift and personnel are required. We strongly recommend arranging internal delivery to your installation location through a licensed and bonded local forwarding agent. SPECTRO will not accept any responsibility for transport within the company. Please check the maximum load and dimensions of lifts as well as the widths of corridors and doorways. The service department is ready to assist you with any questions regarding the transport of the instrument. 2.2 Transportation Caution! Damage to unit! If the unit is relocated after installation, it may be damaged. Secure the unit for transportation. Never transport the unit without the wooden plate supplied for this purpose, Contact the SPECTRO Service Department in this matter. Installation Information Rev.1 4 01.06.2007 SPECTRO ARCOS Warning! Heavy object! The unit weighs approx. 250 kg (~ 550 lbs) and the weight is not evenly distrib- uted. Always use appropriate gear to lift the unit. Avoid to tilting the instrument more than 10 degrees from the vertical. 2.2.1 Remove from pallet The unit is fixed to a wooden plate. This wooden plate is fixed with 4 Phillips screws to the bottom part of the crate (pallet). In the case the pallet cannot be moved to the place of installation, the unit can also be transported on the wooden plate, only. Remove the Phillips screws if this should be necessary. See picture 1 and 2. Picture 1 Picture 2 Now the wooden plate including the unit can be pushed from the pallet onto a hand pallet truck or forklift. Installation Information Rev.1 5 01.06.2007 SPECTRO ARCOS The pictures 3 to 8 show how to remove the unit from the pallet. Picture 3 Picture 4 Picture 5 Picture 6 Picture 7 Picture 8 Installation Information Rev.1 6 01.06.2007 SPECTRO ARCOS Picture 9 Picture 9 shows how to use a fork lift to lift the unit onto a bench. Please note that the unit bottom does not support any lifting devices. Never lift the unit without the wooden plate, 2.2.2 Instrument transport device For lifting the unit from the plate onto the bench the transport device (square bars) included in the shipment can be used. First, unscrew the retaining screws. See picture 10 and 11. Picture 10 Picture 11 Installation Information Rev.1 7 01.06.2007 SPECTRO ARCOS To mount the bars, pull the 4 sliding bars out and tighten the lifting bars to it. Picture 12 Picture 13 The instrument can now be lifted onto a bench or table. Make sure the bench/table has corresponding dimensions and load-carrying capacity. Picture 14 Installation Information Rev.1 8 01.06.2007 SPECTRO ARCOS 2.2.3 Mounting of the side panels Finally mount the two small side panels, which are included in the scope of supply. Remove the lifting bars from the transport device. Left side Unscrew the screws on front of the sliding bars half way and mount the cover. See picture 15 to 19. Picture 15 Picture 16 Picture 17 Picture 18 Tighten the screws and slide the panel back Picture 19 Installation Information Rev.1 9 01.06.2007