Anchor Fastening HSA | Stud anchor Technology Manual Hilti Stud anchor Carbon steel and stainless steel HSA HSA-BW HSA-R2 HSA-R Hot dipped galvanized HSA-F M6 – M20 11 / 2012 Version 2012-11 1 HSA | Stud anchor HSA Stud anchor Anchor version Benefits - Fast & convenient setting HSA Carbon steel behaviour with DIN 125 washe - Reliable ETA approved torqueing using impact wrench with torque HSA-R Stainless bar for torque control steel A4 - Small edge and spacing distances HSA-R2 Stainless steel A2 - High loads with DIN 125 washer - Three embedment depths for maximal design flexibility HSA-BW Carbon steel - M12, M16 and M20 ETA approved with DIN 9021 for diamond cored holes using DD washer 30-W and matching diamond core bit - Suitable for pre- and through fastening PROFIS Small edge Diamond European Fire Corrosion CE Anchor Concrete distance drilled Technical resistance resistance conformity design and spacing holes Approval software Approvals / certificates Description Authority / Laboratory No. / date of issue European technical approval a) DIBt, Berlin ETA-11/0374 / 2012-07-19 Fire test report IBMB, Braunschweig 3215/229/12 / 2012-08-09 a) All data given in this section according ETA-11/0374, issue 2012-07-19. Basic loading data (for a single anchor) All data in this section applies to For details see Simplified design method - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Minimum base material thickness - Non-cracked Concrete C 20/25, f = 25 N/mm² ck,cube 2 11 / 2012 HSA | Stud anchor Mean ultimate resistance Anchor size M6 M8 M10 Effective anchorage h [mm] 30 40 60 30 40 70 40 50 80 depth ef Tensile N Ru,m HSA, HSA-BW [kN] 8,0 9,5 9,5 11,0 17,0 17,3 17,0 23,7 29,4 HSA-R2, HSA-R [kN] 8,0 10,0 11,9 11,0 17,0 19,2 17,0 23,7 33,2 Shear V Ru,m HSA, HSA-BW [kN] 6,8 6,8 6,8 11,0 11,1 11,1 19,8 19,8 19,8 HSA-R2, HSA-R [kN] 7,6 7,6 7,6 11,0 12,9 12,9 23,7 23,7 23,7 Anchor size M12 M16 M20 Effective anchorage h [mm] 50 65 100 65 80 120 75 100 115 depth ef Tensile N Ru,m HSA, HSA-BW [kN] 23,7 35,1 43,5 35,1 48,0 66,4 43,5 67,0 82,7 HSA-R2, HSA-R [kN] 23,7 35,1 46,5 35,1 48,0 66,4 43,5 67,0 82,7 Shear V Ru,m HSA, HSA-BW [kN] 31,0 31,0 31,0 53,6 53,6 53,6 87,1 90,1 90,1 HSA-R2, HSA-R [kN] 30,8 30,8 30,8 59,3 59,3 59,3 87,1 96,5 96,5 Characteristic resistance Anchor size M6 M8 M10 Effective anchorage h [mm] 30 40 60 30 40 70 40 50 80 depth ef Tensile N Rk HSA, HSA-BW [kN] 6,0 7,5 9,0 8,3 12,8 16,0 12,8 17,9 25,0 HSA-R2, HSA-R [kN] 6,0 7,5 9,0 8,3 12,8 16,0 12,8 17,9 25,0 Shear V Rk HSA, HSA-BW [kN] 6,5 6,5 6,5 8,3 10,6 10,6 18,9 18,9 18,9 HSA-R2, HSA-R [kN] 7,2 7,2 7,2 8,3 12,3 12,3 22,6 22,6 22,6 Anchor size M12 M16 M20 Effective anchorage h [mm] 50 65 100 65 80 120 75 100 115 depth ef Tensile N Rk HSA, HSA-BW [kN] 17,9 26,5 35,0 26,5 36,1 50,0 32,8 50,5 62,3 HSA-R2, HSA-R [kN] 17,9 26,5 35,0 26,5 36,1 50,0 32,8 50,5 62,3 Shear V Rk HSA, HSA-BW [kN] 29,5 29,5 29,5 51,0 51,0 51,0 65,6 85,8 85,8 HSA-R2, HSA-R [kN] 29,3 29,3 29,3 56,5 56,5 56,5 65,6 91,9 91,9 11 / 2012 3 HSA | Stud anchor Design resistance Anchor size M6 M8 M10 Effective anchorage h [mm] 30 40 60 30 40 70 40 50 80 depth ef Tensile N Rd HSA, HSA-BW [kN] 4,0 5,0 6,0 5,5 8,5 10,7 8,5 11,9 16,7 HSA-R2, HSA-R [kN] 4,0 5,0 6,0 5,5 8,5 10,7 8,5 11,9 16,7 Shear V Rd HSA, HSA-BW [kN] 5,2 5,2 5,2 5,5 8,5 8,5 15,1 15,1 15,1 HSA-R2, HSA-R [kN] 5,5 5,8 5,8 5,5 9,8 9,8 18,1 18,1 18,1 Anchor size M12 M16 M20 Effective anchorage h [mm] 50 65 100 65 80 120 75 100 115 depth ef Tensile N Rd HSA, HSA-BW [kN] 11,9 17,6 23,3 17,6 24,1 33,3 21,9 33,7 41,5 HSA-R2, HSA-R [kN] 11,9 17,6 23,3 17,6 24,1 33,3 21,9 33,7 41,5 Shear V Rd HSA, HSA-BW [kN] 23,6 23,6 23,6 40,8 40,8 40,8 43,7 68,6 68,6 HSA-R2, HSA-R [kN] 23,4 23,4 23,4 45,2 45,2 45,2 43,7 73,5 73,5 Recommended loads Anchor size M6 M8 M10 Effective anchorage h [mm] 30 40 60 30 40 70 40 50 80 depth ef Tensile N a) rec HSA, HSA-BW [kN] 2,9 3,6 4,3 4,0 6,1 7,6 6,1 8,5 11,9 HSA-R2, HSA-R [kN] 2,9 3,6 4,3 4,0 6,1 7,6 6,1 8,5 11,9 Shear V a) rec HSA, HSA-BW [kN] 3,7 3,7 3,7 4,0 6,1 6,1 10,8 10,8 10,8 HSA-R2, HSA-R [kN] 4,0 4,1 4,1 4,0 7,0 7,0 12,9 12,9 12,9 Anchor size M12 M16 M20 Effective anchorage h [mm] 50 65 100 65 80 120 75 100 115 depth ef Tensile N a) rec HSA, HSA-BW [kN] 8,5 12,6 16,7 12,6 17,2 23,8 15,6 24,0 29,7 HSA-R2, HSA-R [kN] 8,5 12,6 16,7 12,6 17,2 23,8 15,6 24,0 29,7 Shear V a) rec HSA, HSA-BW [kN] 16,9 16,9 16,9 29,1 29,1 29,1 31,2 49,0 49,0 HSA-R2, HSA-R [kN] 16,7 16,7 16,7 32,3 32,3 32,3 31,2 52,5 52,5 a) With overall partial safety factor for action γ = 1,4. The partial safety factors for action depend on the type of loading and shall be taken from national regulations. 4 11 / 2012 HSA | Stud anchor Materials Mechanical properties Anchor size M6 M8 M10 M12 M16 M20 Nominal HSA [N/mm²] 650 580 650 700 650 700 tensile HSA-BW strength HSA- R2 fuk,thread HSA-R [N/mm²] 650 560 650 580 600 625 HSA Yield HSA-BW [N/mm²] 520 464 520 560 520 560 strength fyk,thread HSA-R2 [N/mm²] 520 448 520 464 480 500 HSA-R Stressed HSA cross- HSA-BW [mm²] 20,1 36,6 58,0 84,3 157,0 245,0 section HSA-R2 A HSA-R s,thread HSA Moment of HSA-BW [mm³] 12,7 31,2 62,3 109,2 277,5 540,9 resistance W HSA-R2 HSA-R HSA Char. bending HSA-BW [Nm] 9,9 21,7 48,6 91,7 216,4 454,4 resistance M0Rk,s HSA-R2 [Nm] 9,9 21,0 48,6 76,0 199,8 405,7 HSA-R Material quality Type Part Material Coating Bolt Carbon-steel HSA Sleeve Carbon-steel HSA-BW HSA :carbon steel, Galvanized (≥5 µm) Washer HSA-BW: carbon steel Carbon Steel Hexagon nut Steel, strength class 8 Bolt Stainless steel A2, 1.4301 or 1.4162 M6 - M20 coated HSA-R2 Sleeve Stainless steel A2, 1.4301 or 1.4404 - Stainless Steel Washer Stainless steel grade A2 - Grade A2 Hexagon nut Stainless steel grade A2 M6 - M20 coated Bolt Stainless steel grade A4, 1.4401 or 1.4362 M6 - M20 coated HSA-R Sleeve Stainless steel A2, 1.4301 or 1.4404 - Stainless Steel Washer Stainless steel grade A4 - Grade A4 Hexagon nut Stainless steel grade A4 M6 - M20 coated 11 / 2012 5 HSA | Stud anchor Geometry washer Anchor Size M6 M8 M10 M12 M16 M20 Inner diameter d 1 HSA, HSA-R2/ R d [mm] 6,4 8,4 10,5 13,0 17,0 21 1 HSA-BW d [mm] 6,4 8,4 10,5 13,0 17,0 22 1 Outer diameter d 2 HSA, HSA-R2/ R d [mm] 12,0 16,0 20,0 24,0 30,0 37,0 2 HSA-BW d [mm] 18,0 24,0 30,0 37,0 50,0 60,0 2 Thickness h HSA, HSA-R2/ R h [mm] 1,6 1,6 2,0 2,5 3,0 3,0 HSA-BW h [mm] 1,8 2,0 2,5 3,0 3,0 4,0 Anchor dimensions and coding Product marking and identification of anchor Beginning of thread: setting depth indicator for h Blue ring: setting depth indicator for h nom,1 nom,2 h is reached when non-threaded h is reached when the blue nom,1 nom,2 part of the bolt is completely below the ring is completely below the concrete surface concrete surface Sleeve Bolt Washer Nut Letter code Marking: Material code e.g. Hilti HSA … Brand and Anchor type M12 65/50/15 … Anchor Size and the max. t / t / t for the corresponding h / h / h fix,1 fix,2 fix,3 nom,1 nom,2 nom,3 Material code for identification of different materials HSA-R2 HSA-R HSA/ HSA-BW Type (stainless steel (stainless steel (carbon steel) grade A2) grade A4) Material Code Letter code Letter code Letter code without mark with two marks with three marks 6 11 / 2012 HSA | Stud anchor Effective and nominal anchorage depth Anchor size M6 M8 M10 Effective anchorage h [mm] 30 40 60 30 40 70 40 50 80 depth ef Nominal anchorage h [mm] 37 47 67 39 49 79 50 60 90 depth nom Anchor size M12 M16 M20 Effective anchorage h [mm] 50 65 100 65 80 120 75 100 115 depth ef Nominal anchorage h [mm] 64 79 114 77 92 132 90 115 130 depth nom Letter code for anchor length and maximum thickness of the fixture t fix Type HSA, HSA-BW, HSA-R2, HSA-R Size M6 M8 M10 M12 M16 M20 h [mm] 37 / 47 / 67 39 / 49 / 79 50 / 60 / 90 64 / 79 / 114 77 / 92 / 132 90 / 115 / 130 nom t fix t /t /t t /t /t t /t /t t /t /t t /t /t t /t /t Letter fix,1 fix,2 fix,3 fix,1 fix,2 fix,3 fix,1 fix,2 fix,3 fix,1 fix,2 fix,3 fix,1 fix,2 fix,3 fix,1 fix,2 fix,3 z 5/-/- 5/-/- 5/-/- 5/ -/- 5/-/- 5/-/- y 10/-/- 10/-/- 10/-/- 10/-/- 10/-/- 10/-/- x 15/5/- 15/5/- 15/5/- 15/-/- 15/-/- 15/-/- w 20/10/- 20/10/- 20/10/- 20/5/- 20/5/- 20/-/- v 25/15/- 25/15/- 25/15 25/10/- 25/10/- 25/-/- u 30/20/- 30/20/- 30/20/- 30/15/- 30/15/- 30/5/- t 35/25/5 35/25/- 35/25/- 35/20/- 35/20/- 35/10/- s 40/30/10 40/30/- 40/30/- 40/25/- 40/25/- 40/15/- r 45/35/15 45/35/5 45/35/5 45/30/- 45/30/- 45/20/5 q 50/40/20 50/40/10 50/40/10 50/35/- 50/35/- 50/25/10 p 55/45/25 55/45/15 55/45/15 55/40/5 55/40/- 55/30/15 o 60/50/30 60/50/20 60/50/20 60/45/10 60/45/5 60/35/20 n 65/55/35 65/55/25 65/55/25 65/50/15 65/50/10 65/40/25 m 70/60/40 70/60/30 70/60/30 70/55/20 70/55/15 70/45/30 l 75/65/45 75/65/35 75/65/35 75/60/25 75/60/20 75/50/35 k 80/70/50 80/70/40 80/70/40 80/65/30 80/65/25 80/55/40 j 85/75/55 85/75/45 85/75/45 85/70/35 85/70/30 85/60/45 i 90/80/60 90/80/50 90/80/50 90/75/40 90/75/35 90/65/50 h 95/85/65 95/85/55 95/85/55 95/80/45 95/80/40 95/70/55 g 100/90/70 100/90/60 100/90/60 100/85/50 100/85/45 100/75/60 f 105/95/75 105/95/65 105/95/65 105/90/55 105/90/50 105/80/65 e 110/100/80 110/100/70 110/100/70 110/95/60 110/95/55 110/85/70 d 115/105/85 115/105/75 115/105/75 115/100/65 115/100/60 115/90/75 c 120/110/90 120/110/80 120/110/80 125/110/75 120/105/65 120/95/80 b 125/115/95 125/115/85 125/115/85 135/120/85 125/110/70 125/100/85 a 130/120/100 130/120/90 130/120/90 145/130/95 135/120/80 130/105/90 Anchor length in bolt type and grey shaded are standard items. For selection of other anchor length, check availability of the items. 11 / 2012 7 HSA | Stud anchor Setting Installation equipment Anchor size M6 M8 M10 M12 M16 M20 TE40 – Rotary hammer TE2 – TE16 TE70 Other tools hammer, torque wrench, blow out pump 8 11 / 2012 HSA | Stud anchor Setting instruction Drill and clean borehole Standard drilling method Alternative drilling method M6 – M20: Hammer drilling (HD) M12 – M20: Diamond drilling (DD) Install anchor with hammer or machine setting tool Standard setting method Alternative setting method M6 – M20: Hammer setting M8 – M16: Machnine setting Check setting Tightening the anchor For detailed information on installation see instruction for use given with the package of the product. 11 / 2012 9 HSA | Stud anchor Machine tightening of the anchor for standard installation torque Type HSA, HSA-BW, HSA-R2, HSA-R Anchor Size M6 M8 M10 M12 M16 M20 Setting position Nominal h [mm] 37 47 67 39 49 79 50 60 90 64 79 114 77 92 132 90 115 130 anchorage depth nom Standard T [Nm] - 15 25 50 80 - installation torque inst S-TB HSA S-TB HSA S-TB HSA S-TB HSA Setting tool M8 M10 M12 M16 Hilti SIW 14-A Hilti Impact screw driver Hilti SIW 22-A SIW 22T-A - - HSA, HSA-BW 1 1 Speed 3 -1) HSA-R2, HSA-R 3 3 Setting time t [sec.] 4 set 1) The impact screw driver operates with a fixed speed. Setting instruction for HSA, HSA-BW, HSA-R2 and HSA-R M8 – M16 Tightening the anchor - alternatively with imact screw driver and special socket Selecting the impact screw driver, battery and special socket Selecting the speed setting and state of charge of the battery Tighten the anchor and check the installation For detailed information on installation see instruction for use given with the package of the product. 10 11 / 2012