Advanced Composite Materials and Manufacturing Engineering Edited by B. Xu H.Y. Li Advanced Composite Materials and Manufacturing Engineering Selected, peer reviewed papers from the 2012 International Conference on Advanced Composite Materials and Manufacturing Engineering (CMME2012), October 13-14, 2012, Beijing, China Edited by B. Xu and H.Y. Li Copyright  2012 Trans Tech Publications Ltd, Switzerland All rights reserved. No part of the contents of this publication may be reproduced or transmitted in any form or by any means without the written permission of the publisher. Trans Tech Publications Ltd Kreuzstrasse 10 CH-8635 Durnten-Zurich Switzerland http://www.ttp.net Volume 583 of Advanced Materials Research ISSN print 1022-6680 ISSN cd 1022-6680 ISSN web 1662-8985 Full text available online at http://www.scientific.net Distributed worldwide by and in the Americas by Trans Tech Publications Ltd Trans Tech Publications Inc. Kreuzstrasse 10 PO Box 699, May Street CH-8635 Durnten-Zurich Enfield, NH 03748 Switzerland USA Phone: +1 (603) 632-7377 Fax: +41 (44) 922 10 33 Fax: +1 (603) 632-5611 e-mail: [email protected] e-mail: [email protected] Preface 2012 International conference on Advanced Composite Materials and Manufacturing Engineering (CMME2012) is a conference focusing its center on Advanced Composite Materials and Manufacturing Engineering. The objective of the conference is to provide a forum for different researchers in different fields especially in Material field to exchange their different findings. The researchers are from different countries and in different professionals. The conference will bring all the researchers from all around the world together to share their new findings, thus to promote academic exchanging. All the papers accepted had been passed the strict peer-review course before their publication by TTP. Here, we should show our sincere thanks to all authors for their high-quality papers and their careful presentations in the conference. At the same time, all reviewers should be thanked too for their careful work. In addition, all sponsors and all team members of TTP should be especially thanked too for their hard work and careful edition on CMME2012. It's the joint efforts of all different parts that they makes our conference be successful. The Organizing Committee of CMME2012 Committees: Honorary chair: S.L. Xue,Maryland University of America Fitch Chen,Zhongshan University Organizing Chairs: X.H Zhan,Nanjing university of Aeronautics David Yang,Wuhan University of Technology Organizing Committee: Z.P. Lv,Huazhong university of science and technology Q. Huang,Huazhong university of science and technology Helen Li,Yangtze university Sara He,Wuhan textile university Jack Ma,Wuhan textile university George Liu,Huaxia college Wuhan Polytechnic University Hanley Wang,Wuchang University of Technology Diana Yu,Huazhong university of science and technology Anna Tian,Wuchang University of Technology Fitch Chen,Zhongshan University David Bai,Nanjing university of technology Y. Li,South China normal university Harry Song,Guangzhou University Sponsors: Wuhan institute of technology,China Beijing Material Research Center,China International Material Research Society,Hong Kong Table of Contents Preface, Committees and Sponsors Chapter 1: Advanced Composite Materials and Composite Properties of Materials Preparation and Properties of Magnesium-Aluminum Matrix Composites Reinforced with Silicon Carbon Particles T.W. Zhou, X.R. Liu, R.L. Zhang and Z.Z. Su 3 Research on Synthesis and Performance of Solvent-Free Aluminum-Plastic Composite Polyurethane Adhesive Q. Wang, G.X. Chen, S.L. Chen, J.L. Tai and Q.F. Chen 9 Synthesis of Attapulgite Fiber-Aerogel Composite and its Oil Absorption Capacity under Low Temperature D.X. Cheng, H.N. Ying, H.C. Jin and Y.L. Zhang 14 Synthesis of AlN Nanowires and Characterization with Properties of Composite Materials L.H. Shen and N. Wang 18 Mechanical Properties of Functionalized Carbon Nanotube as Reinforcements C.C. Ling, Q.Z. Xue and X.Y. Zhou 22 Microstructure and Tribological Properties of Self-Lubricating Graphite/Ni60 Composite Coatings Prepared by Laser Cladding J.X. Yang, Z.C. Wang, X.H. Miao and X.B. Wang 27 Processing and Mechanical Properties of Starch and PVA Composite Reinforced by MCC W.Y. Liu, K. Tan, Y.G. Huang, Y. Chen, X.G. Li, J.H. Yang, P. Jiang and Y.J. Liu 32 The Electrical Resistivity of B C Modified Phenol-Formaldehyde Resin Matrix Composite 4 Materials Pyrolyzed at Different Temperatures H.Y. Jiang, J.G. Wang, S.Q. Wu and W.L. Zhang 36 Packaging Properties of Composite Film Made up of Polylactic Acid (PLA) and Triacetin W.L. Zhang, H.Y. Jiang, W. Weng, R.M. Wu and Q.L. Liu 40 Preparation and Treatment for Oral Ulcer of Quercetin and the Drug-Loaded Chitosan Composite Material L. Guo, Z.Y. Zhao, J. Bai and S.Y. Han 44 The Wood Composite Materials of Table Tennis Bat and Batting Techniques Z.H. Wang, R.J. Yuan and X.B. Fan 49 Study of Heat-Resistant Cotton Stalk Bast Fibers Reinforced Polylactic Acid Composites Z. Wu, C.Y. Wei, Y.Z. Cui, L.H. Lv and X. Wang 53 Vibration Characteristics Analysis of Aeroengine Composite Blade Q. Yang, K.Q. Fang and C. Shao 57 Study on the Preparation and Properties of Nano-SiC/MC Nylon 6 Composites B.F. Huang, J.J. Wang, H.X. Liang and Z.Y. Li 62 Properties of Phase Functions for Biological Materials with Properties of Composite Materials and their High-Order Parameters X.J. Zhang, Y. Li and W. Yang 66 Research on the Flame-Retardant Property of Continuous Basalt Fiber Based on Basic Properties of Advanced Composite Materials S.S. Jia, L.H. Yang and R.H. Wu 71 Electrochemical Analysis and Applications of New Carbon Materials with Properties of Composite Materials X. Hua, G.J. Shen and Y. Du 75 Study on Glass Forming Ability for the Nd Co Al Alloys 60-x 15+x 25 Y.J. Tang, H. Xu, X.H. Tan, H. Man and Q. Bai 82 CeO /TiO Nanotubes Composites: Synthesis, Characterization, and Photocatalytic 2 2 Properties H.B. Li, X.Y. Li, Y.D. Song, S.G. Chen, Y. Wang, C.Y. Sui and C. Jiang 86 b Advanced Composite Materials and Manufacturing Engineering Composite Materials and Bone Tissue Engineering in Sports Injury Z.Y. Xia, J.Y. Hou and K. Li 91 Genotoxicity Assessment of Advanced Composite Material – Silicone Gel-Filled Breast Implant after Radiation Sterilization W. Liu, Y. Yang and Q.F. Liu 95 A Study for Damage Mode of Composite Aircraft Structure with Advanced Composite Materials Y. Gao, N. Li and B. Liu 100 Reaction Kinetics and Optical Storage Characters of a New Diarylethene Materials with Composite Properties S.Q. Cui, Y.H. Yang and S.Z. Pu 105 Study on Composite Properties of a Novel Unsymmetrical Diarylethene with Benzene Unit W.W. Geng, S.Q. Cui and S.Z. Pu 109 Synthesis and Application of a New Diarylethene with Composite Properties for Polarization Holographic Recording S.H. He, G. Liu and S.Q. Cui 113 Photochromic Composite Properties and Application in Optical Memory of a Diarylethene with Benzofuran Unit S.H. Jing, S.Q. Cui and S.Z. Pu 117 Study on Advanced Composite Synthesis of a New Photochromic Diarylethene Materials with Bearing Thiophene Units H. Li, Y.M. Tu and G. Liu 121 Synthesis, Photochromism and Optical Recording Properties of a Diarylethene Materials Bearing an Isoxazole Unit X.T. Li, H. Li and G. Liu 125 Study on Photochromic and Optical Storage Composite Properties of a Novel Diarylethene Bearing Isoxazole Unit X. Li, W.J. Liu and G. Liu 130 Study on Composite Photochromic Properties of New Diarylethenes Bearing Naphthyl Rings P.P. Ren and S.Z. Pu 134 Study on Composite Synthesis and Properties of a Novel Diarylethene Material Bearing Nitrile Group Z.P. Tong, S.Q. Cui and S.Z. Pu 138 Study on Strengthening Glued-Laminated Timber with Aramid Cords and Properties of Composite Materials M. Rajczyk and D. Jończyk 142 Impact of Glass Sheets Rigidity on Loads Interaction in an Insulating Glass Unit with Properties of Composite Materials Z. Respondek and M. Rajczyk 146 The Effects of Fiber Volume Fraction on the Experiment Modal Behavior of 45°/-45° Carbon Fiber Plain Woven Fabric/Epoxy Resin Composites Q. Liu, X.Y. Pei and J.L. Li 150 Concrete Composite Properties with Modified Sodium Bentonite in Material Application Engineering J. Rajczyk and B. Langier 154 The Structures and Electronic Properties of Composite Material (La Al ) O from First- x 1-X 2 3 Principles Study H.Y. Yan, Y.R. Guo and Q.G. Song 158 Preparation of Composite Iron Oxides via Hydrothermal Process J.Z. Huo 162 Application of ANSYS in Electric Field Distribution of Ti-Al Layered Composite Materials S.G. Zhou and P.X. Zhu 167 Preparation and Performance Evaluation of the Analgesic and Anti-Inflammatory Effects of Chitosan Composite Materials L. Guo, Z.Y. Zhao, J. Bai, S.Y. Han and X. Zhao 171 Mold Electromagnetic Stirring for Horizontal Continuous Casting of CuCrZr Alloys with Composite Properties H.Q. Li, Z.W. Hu, D.W. Deng, C.J. Xiang, Z.P. Chen and X. Zhang 175 B. Xu and H.Y. Li c Experimental Research on the Low Velocity Impact Damage of CCF300/QY8911 Composite Laminates H.M. Hong, M. Li, J.Y. Zhang and Y.N. Zhang 179 The Effect of Corner Form on Thermal Transport of Z-Shaped Graphene Nanojunctions with Composite Properties of Crystal Z.G. Bao and H.Q. Yang 183 Study on Composite Optics Properties of FeCl ·4H O Crystal in Material Engineering 2 2 F. Miao and Y. Huang 187 Study of Glass Composite Structure Displacement Stressed by Atmospheric Factors Z. Respondek and M. Rajczyk 191 Production of Composite Glass with Increased Mechanical Properties Z. Respondek 195 Fabrication and Luminescence Properties of Y O :Eu3+/AAO Composite 2 3 S.W. Li and S.G. Ju 199 Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage H.M. Hong, M. Li, J.Y. Zhang and Y.N. Zhang 203 Knittability of Basalt Fiber Weft-Knitted Fabrics for Composite Reinforcement Based on Properties of Advanced Composite Materials Q.M. Wang, X. Yang, J. Gao and P.F. Song 207 Performance of Chloride Binding by Aluminate Hydrates in Cement-Based Composite Materials M.F. Gou and X.M. Guan 211 Effect of Ti(C,N) Content on Microstructure and Mechanical Properties of Ti(C,N)/Fe Composites R.F. Wang, Z.P. Sun, L.Y. Zou and G.J. Zhang 215 Effect of VC Content on Microstructure and Mechanical Properties of VC/Fe-Based Composites R.F. Wang, Z.P. Sun, G.J. Zhang and L.Y. Zou 219 Synthesis and Performance of LiNi Mn O as Cathodes for Li-Ion Batteries with the 0.45 0.55 2 Composite Properties of Materials L.Z. Zhao, X.K. Chang, C.F. Wu and J.C. Zhang 223 Study of Flame-Retardant Cotton Stalk Bast Fibers Reinforced Polylactic Acid Composites Z. Wu, C.Y. Wei, Y.Z. Cui, L.H. Lv and X. Wang 228 The Soleplate Materials and Performance of Table Tennis Bat with the Composite Properties of Materials in Material Engineering W.M. Sun, S.Q. Zhang and S.R. Hao 232 Synthesis and Characterization of Caged Phosphate Microparticles Coated with Melamine Resin Based on Composite Properties of Materials X.M. Fang, Y.Q. Xu and T. Ding 236 Crawling Pipeline of Pink-and-White Research and Design with Composite Properties of Materials H.P. Liu and E.B. Peng 240 Study on Scavenging Free Radical Activity with Polysaccharides Materials in Chuanxiong Based on Composite Properties of Biomaterials Y.G. Bi and C.C. Liu 244 Chapter 2: Materials and Mechanics Study in Manufacturing Engineering Study on the Formability and Friction of Hot Forging Process of a Spur Gear Shaft for Manufacturing Engineering G.C. Wang, B.H. Hao, F.X. Pei and T. Wang 251 The Study on Application of Artificial Board Materials in Musical Instrument- Manufacturing Engineering H.Y. Zhang 255 Study on Tool Wear of Indexable Coating Inserts for Turning Inconel 718 Z.F. Liu, L. Peng and Z.D. Lv 259 d Advanced Composite Materials and Manufacturing Engineering Mechanical Properties of Composites with Embedded FBG Sensors in Manufacturing Engineering W.J. Wang, H. Song, W. Guo and N. Sheng 263 Microstructures and Properties of Al-Cu-Si Brazing Foils by Melt-Spun Processing W.Y. Yu, W.J. Lu and N.R. Li 268 Structural and Magnetic Properties of Different Temperature Sintering La-Substituted Barium Ferrite J. Li, H.W. Zhang, Y.X. Li, Q. Li and Y.B. Ma 272 Numerical Simulation of Sheet Metal without Burr in the Process of Blanking Based on DEFORM for Manufacturing Engineering S.T. Fan and Y. Wu 276 The Research on D107 Electrode Repairment of Weld Surface Defects of Steel Sphere in Material Engineering D.M. Zhao and X.P. Liu 281 The Study on Solid Superacid Synthesis of K12A with Manufacturing Equipment D.M. Zhao and X.P. Liu 285 Research on Electrochemical Micro-Machining in Manufacturing Engineering by Using Hollow Structure Cathode to Improve Current Stability J. Wu, H. Wang, X.L. Zhao, G.F. Ding, Y. Huang and D. Zhang 289 Dynamic Property Analysis of Mini Wind Generator for Manufacturing Engineering by FEM Analysis Based on Plastic Properties of Structure Materials S.F. Wang 293 Study on the Effect of Slenderized Wool on Knitting Performance in Manufacturing Engineering S.S. Jia, L.H. Yang and H.X. Bai 297 Power Spinning Study of Thin-Walled 5A06 Aluminum Alloy Cylinder with Longitudinal and Hoop Inner Ribs for Manufacturing Engineering H.Q. Xu, M.Z. Li, L.L. Li, R. Zhang, D.L. Wang, W. Liang and Y.J. Shen 301 Microstructure Evolution of a HSLA Offshore Steel with Cooling Rates Y.T. Chen, K.G. Zhang and J.H. Cheng 306 Synthesis and Properties Study of a New Perfluorocyclopentenes Bearing Naphthyl Unit for Manufacturing Engineering H.C. Ding, C.H. Zheng and G. Liu 310 Study on Improved Grinding Process of Sapphire with LED Substrate Material in Manufacturing Engineering H. Zhou, X.M. Xu, Z.G. Zhuo, Y. Zang, L.X. Xu and H. Feng 314 Dynamic Compressive Properties of Vulcanized Rubber Material from a Split Hopkinson Pressure Bar Experiment in Rubber Manufacturing P. Ye, C.H. Wu and Z.F. Liu 318 The Applied Research of New Type Fiber Material on the Manufacture of Sports Equipment Z. Wang, M.M. Sun and D. Li 322 Molecular Dynamics Simulation of Thermodynamic Properties for Al-Si Alloys in Material Manufacturing Engineering L.F. Li and X.F. Zhang 326 Chapter 3: Material Engineering and Material Application Engineering Nanosecond Excimer Laser Ablation (W,Ti)C-Co Cemented Carbide J.X. Yang, X.H. Miao, Z.C. Wang and X.B. Wang 333 Effects of Oxalic Acid and Sodium Chloride on the Superhydrophobic Surface on Aluminum Alloy by Anodizing and PP-Coating W.Y. Liu, Y.T. Luo, L.Y. Sun, R.M. Wu, H.Y. Jiang and Y.J. Liu 338 Facile Preparation of the Superhydrophobic Surface on Aluminum Alloy by PP-Coating W.Y. Liu, L.Y. Sun, Y.T. Luo, R.M. Wu, H.Y. Jiang and Y.J. Liu 342 Bacteriostasis of a Super-Hydrophobic Micro-Porous Aluminum Surface by a Facile Preparation Method R.M. Wu, H.Y. Jiang, W.Y. Liu, J. Deng, Z.Q. Yuan, Q.L. Liu and H. Chen 346